• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.361-368
• /
• 2014

Modal properties for tapered cantilever pipe-type beam is identified by applying the boundary conditions to a general solution for tapered beam. A bending stiffness for cracked beam is constructed based on an energy method for tapered cantilever thin-walled pipe, which has a through-the-thickness crack, subjected to bending. Then the natural frequencies and mode shapes of a tapered cantilever thin-walled cracked pipe are identified. It can be found that the phenomenon of the bending stiffness distribution along the beam length of the cracked beam is quite reasonable, the natural frequencies are decreased as the crack sizes are increased, and the mode shapes are changed due to the crack. This results may be used to the vibration-based crack identification for the tapered cantilever pipe-type tower structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.5
• /
• pp.78-85
• /
• 1989

This paper describes a statistical methods and perception test for extracting the parameters to be used for the synthesis-by-rule of Korean plosives. Formant synthesizer is chosen for the synthesis of the phonemes. Speech materials for the analysis consists of 72 CV monosyllables from the single male speaker. The analysis is done mainly focused on the variation of parameters in time and frequency domain, then perception tests are executed to estimate the effects of variations of the formant transitions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.246-253
• /
• 2013

This paper addresses the technology of active flow control for stabilizing a flow field. In order for flow field modeling from the control point of view, the huge-data set from CFD(computational fluid dynamics) are reduced by using a POD(Proper Orthogonal Decomposition) method. And then the flow field is expressed with dynamic equation by low-order modelling approach based on the time and frequency domain analysis. A neural network flow estimator from the pressure information measured on the surface is designed for the estimation of the flow state in the space. The closed-loop system is constructed with feedback flow controller for stabilizing the vortices on the flow field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.25-33
• /
• 2018

In this paper, we propose an iterative self-interference (SI) channel estimation method for in-band full-duplex cellular systems that employ orthogonal frequency division multiple access (OFDMA) on downlink (DL) and single-carrier frequency division multiple access (SC-FDMA) on uplink (UL), as in Long Term Evolution (LTE) systems. The proposed method first acquires coarse estimates of SI channels using DL signals and UL pilots, which are known to the base stations, and then refines the estimates by consecutively exploiting averaging in the frequency domain and channel truncation in the time domain. In addition, the method enhances the estimates further by iteratively executing this estimation procedure, and does not require any radio resources dedicated to SI channel estimation. Simulation results demonstrate that by significantly improving the SI channel estimation performance without requiring exact knowledge of the SI channel length, the proposed method achieves UL channel estimation performance and signal-to-interference-plus-noise ratio (SINR) performance very close to those in perfect SI cancellation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.55-62
• /
• 2009

In this paper, we propose a method on the training sequence based on channel estimation issues for relay networks that employ amplify-and-forward(AF) transmission scheme. In $^{[1]}$ and $^{[2]}$, we have to point out that jointly estimating the channel from source to relay and from relay to destination suffers from many drawbacks in fast fading case because the estimation of previous pilots is not suitable for current channel. In this paper, we consider a new joint estimation of overall channel impulse response(CIR) using one OFDM signal without pilots. Using the maximum likelihood(ML) function, we derive a channel estimator by taking the frequency domain of transmitted signal as Gaussian and averaging the ML function over the resulting Gaussian distribution. Simulation results show that our proposed channel estimator performs a fraction of 1dB compared with $^{[1]}$ in high SNR region.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.3-9
• /
• 2014

Two-way full-duplex relay network provides improved spectral efficiency by using either superposition coding or physical layer network coding at relays compared to conventional two-way half-duplex relay network. In this paper, we investigate the impact of residual loop interference on the performance of the two-way full-duplex relay network. Users and relays in the two-way full-duplex relay network estimate the residual loop interference in order to cancel it. However, it is difficult to perfectly cancel the residual loop interference from the received signal due to the estimation error. Numerical results show the impact of the estimation error on the outage probability of the two-way full-duplex relay network.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.65-73
• /
• 2007

This paper presents an on-line correction method of current measurement errors for a pure-integration-based flux estimation down to 1-Hz stator frequency. An observer-based approach is taken as one possible solution of eliminating the dc offset and the negative sequence component of unbalanced gains in the synchronous coordinate. At the same time, the positive sequence component estimation is performed by creating an error signal between a motor model reference and an estimated q-axis rotor flux established by a permanent magnet (PM) in the synchronous coordinate. The compensator utilizes a PI controller that controls the error signal to zero. The proposed technique further contains a residual error compensator to completely eliminate miscellaneous disturbances in the estimated flux. The developed algorithm has been implemented on a 1.1-kW permanent magnet synchronous motor (PMSM) drive to confirm the effectiveness of the proposed scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.594-600
• /
• 2017

This paper proposes a global search based motion estimation algorithm for high performance HEVC encoder and its hardware architecture. To eliminate temporal redundancy, motion estimation in HEVC inter-view prediction uses global search and fast search algorithm to search for a predicted block having a high correlation with the current PU in an interpolated reference picture. The global search method predicts the motion of all candidate blocks in a given search area, thus ensuring optimal results, but has a disadvantage of large computation time. Therefore we propose a new algorithm that reduces computational complexity by reusing SAD operation in global search to reduce computation time of inter prediction. As a result of applying the proposed algorithm to standard software HM16.12, the computation time was reduced by 61%, BDBitrate by 11.81%, and BDPSNR by about 0.5% compared with the existing search algorithm. As a result of hardware design, the maximum operating frequency is 255 MHz and the total number of gates is 65.1K.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1124-1131
• /
• 2008

In this paper, we propose a timing synchronization scheme and its hardware architecture of the next generation IEEE 802.11n wireless LAN standard which is based on MIMO-OFDM technique. Proposed timing synchronization method takes two steps which consist of two modified auto-correlators. For coarse timing synchronization, a sliding window differentiator is used after a conventional auto-correlation in order to avoid plateau problem. The conjugate symmetry property of L-LTS is utilized for the simplification of fine timing synchronization. Since cross-correlation based methods are not required, the computational complexity and the number of multipliers can be reduced. In order to reduce the hardware complexity, we have used sign multipliers. Based on simulation results, the proposed method outperforms a conventional method. The proposed scheme can be applied to IEEE 802.11n systems and can easily be expanded to frequency synchronization scheme.