• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.61-68
• /
• 2007

The frequency response of a microphone, which indicates the frequency range that a microphone can output within the approved level, is one of the most significant standards used to measure the characteristics of a microphone. At present, conventional methods of measuring the frequency response are complicated and involve the use of expensive equipment. To complement the disadvantages, this paper suggests a new algorithm that can measure the frequency response of a microphone in a simple manner. The algorithm suggested in this paper generates the Optimized Aoshima's Time Stretched Pulse(OATSP) signal from a computer via a standard speaker and measures the impulse response of a microphone by convolution the inverse OATSP signal and the received by the microphone to be measured. Then, the frequency response of the microphone to be measured is calculated using the signals. The performance test for the algorithm suggested in the study was conducted through a comparative analysis of the frequency response data and the measures of frequency response of the microphone measured by the algorithm. It proved that the algorithm is suitable for measuring the frequency response of a microphone, and that despite a few errors they are all within the error tolerance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.1-10
• /
• 1993

Frequency response functions(FRF) are the most fundamental data for the frequency domain identifications of structural systems. In this paper, an improved method for estimating FRF's is presented. The new FRF estimator takes the weighted average of two conventional estimators, $H_1$(f) and $H_2$(f), utilizing the fact that $H_2$(f) gives more accurate estimate at resonance, while $H_1$(f) yields better results at antiresonances. Based on the estimated FRF's, the modal parameters of the structures, such as, natural frequencies, damping ratios and mode shapes, are also estimated. The effectiveness of the proposed method is investigated through numerical and experimental studies. The estimated results indicate that the proposed estimator gives more accurate results than other estimators.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.131-137
• /
• 2020

The characteristics of forced vibration with excited sinusoidal force was introduced. Also, numerical analyses and FRF in frequency domain were performed in detail. In this regard, the responses of displacement, velocity and acceleration were investigated in a forced vibration model. The FRF characteristics in real and imaginary part around natural frequency are also discussed. This response approach of forced vibration in time domain is used for the identification and monitoring of sinusoidal forced vibration. For acquiring a displacement, velocity and acceleration, a numerical technique of Runge-Kutta-Gill method was performed. For the FRF(frequency response function), These responses are used. Also, the FRF can represent the intrinsic characteristics of the forced vibration. These performed results and analysis are successful in each damped condition for the forced vibration model. After numerical analysis of the different mass, damping and stiffness, the forced vibration response characteristics with sinusoidal force was discriminated considering its amplitude and frequency simultaneously.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.151-157
• /
• 2022

The purpose of this study was to investigate the frequency characteristics of forced vibration considering the vehicle progress. And the vibration characteristics in frequency domain that occur, when vehicle passes the bump, were analyzed. The responses such as displacement, velocity and acceleration were obtained through numerical analysis, and FFT processing was performed to analyze the frequency response function(FRF) characteristics. In particular, the location of vehicle eigenmodes and external excitation modes was clearly shown and analyzed. In the forced vibration model by external force, the behavior of the eigenmode in power spectrum and real and imaginary parts were also analyzed. The mode characteristics were also analyzed in each FRF. It was approximated by assuming total excitation force by considering the exciting frequency using impulse and sine wave forces, which can give the amplitude and frequencies. The response characteristics of forced oscillations having different mass, damping and stiffness have been systematically discussed.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.130-137
• /
• 2021

The characteristics of forced vibration by an external excitation force having a frequency were analyzed according to the amplitude and frequency of the excitation force. To obtain displacement, velocity, and acceleration, numerical analysis was performed to obtain the frequency response, and in particular, each FRF(Frequency Response Function) was analyzed to reveal the location of the system natural frequency and excitation frequency in the frequency domain. In the vibration model caused by external excitation, the natural frequency and distribution of the surrounding excitation mode in displacement, velocity and acceleration FRF. The FRF was also shown in the power spectrum and FRF of real and imaginary parts. The external excitation force was approximated with the excitation force of a sine wave by giving the amplitude and frequency, the mode generated by this excitation force could be distinguished. After numerical analysis by changing the equivalent mass, damping and stiffness, the forced vibration response characteristics by external excitation force were systematically analyzed.

• Science of Emotion and Sensibility
• /
• v.1 no.1
• /
• pp.171-179
• /
• 1998

스피커의 음질을 평가하기 위해서 가장 많이 측정하는 것은 주파수 응답이다. 그러나 주파수 응답으로부터 바로 스피커의 성능을 평가하기는 어려운데, 이는 인간의 청각특성이 주파수나 음압에 대해 선형적인 관계를 가지지 않기 때문이다. 본 논문에서는 인간의 청각특성 중 24개의 임계대역과 라우드니스 등을 이용하여 스피커의 성능을 평가하는 방법을 제안한다. 본 논문에서 제안하는 방법은 지향서을 고려하여 스피커의 주파수 응답을 구한 후 이를 이상적인 스피커의 주파수 응답과 임계대역-라우드니스 영역에서 비교하여 음질평가지수를 산출한다. 제안된 방법에 의한 스피커의 성능 평가법은 신뢰도가 가장 큰 문제가 되므로 청취평가를 수행하여 그 결과와 비교하고 상관관계를 보였다. 제안된 방법에 의한 결과와 청취평가의 결과는 0.9765의 높은 상관관계를 가졌는데, 이는 본 논문에서 제안하는 방법이 청취평가 대용으로 훌륭히 사용될 수 있음을 의미한다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.61-73
• /
• 1998

라우드스피커의 비선형 음향특성을 해석하기 위하여 라우드스피커 다이아프램의 비 선형특성을 실험적으로 분석하였다. 라우드스피커를 집중질량계로 모델링하고, 출력소음이 없을 때 적용이 가능한 하모닉 발란스법과 출력소음이 있을 때도 적용할 수 있는 통계적 방 법인 라그란지 배수법을 사용하여 비선형 매개변수를 규명하였다. 70Hz 이하의 주파수 영역 에서는 라그란지 배수법이 2차 하모닉 왜곡특성에서 상대적으로 좋은 결과를 보였으며, 3차 하모닉 왜곡특성에서는 하모닉 발란스법이 실험결과와 잘 일치하였다. 전압가진 및 전류 가 진실험을 통하여, 일반화된 주파수 응답함수를 유도하였고 하모닉 왜곡 및 상호변조 특성을 고찰하였다. 고차 주파수 응답특성은 라우드스피커 비선형 매개변수의 변동에 따른 다이아 프램의 비선형특성을 해석하는데 유용한 수단이 될 수 있음도 확인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.223-226
• /
• 1999

인공 잔향기를 구현하는데 있어서, 잔향 시스템의 안정도 및 시간-주파수 응답을 용이하게 제어하기 위하여 일반 FDN's(Feedback Delay Networks)에서의 귀환 행렬인 unitary 행렬를 circulant 행렬로 사용한 CFDN's가 최근에 제안되었다. 그러나, 이 구조는 주파수 응답의 평탄도가 낮고, 영점들의 위치를 조절하기 어렵다는 문제점이 있다. 따라서, 본 연구에서는 CFDN's의 시간응답 특성을 최대한 유지하면서 주파수 응답 특성을 개선하기 위하여, 일반 귀환 필터의 귀환부에 직접경로가 없는 CFDN's를 적용한 MCFDN's(Modified CFDN's) 에 관하여 고찰하고, 이 시스템의 특성을 결정하는 특성 파라미터의 최적화에 대하여 고찰하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.97-108
• /
• 2012

Dynamic responses were measured using long-term monitoring system for Uldolmok tidal current pilot power plant which is one of jacket-type offshore structures. Among the dynamic quantities, the tilt angle was chosen because the low frequency response components can be precisely measured by dynamic tiltmeter, and the natural frequencies and modal damping ratio were successfully identified using proposed LS-FDD (least squared frequency domain decomposition) method. And the effects of tidal height and tidal current velocity on the variation of natural frequencies and modal damping ratios were investigated in time and frequency domain. Also the non-parametric models were tested to model the relationship between tidal conditions and modal properties such as natural frequencies and damping ratios.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.71-78
• /
• 1999

In this paper, a new model for optical phase-locked loop(OPLL) is proposed that includes VCO laser frequency response as well as loop propagation delay. It is found that both of them greatly affect the OPLL performance. Our model can be used for realizing high-performance microwave-range OPLL.