• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.479-485
• /
• 2011

To acquire images in a thermionic-scanning electron-beam system, a scanning unit is needed to control the electron beam emitted from the tungsten filament source. In scanning the electron beam on the solid surface, the signalto-noise ratio depends on the scanning frequency. We used a digital filter to reduce noise by analyzing the real-time frequency of a secondary electron signal. The noise and the true image signal were well separated. We designed the digital filter via a DSP floating-point operation, and the noise elimination resulted in enhanced image quality in a highresolution mode.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.55-61
• /
• 2010

In this paper, we proposed selective extraction method of frequency information and PCA-ELM based diagnosis system for three-phase induction motors. As the first step for diagnosis procedure, DFT is performed to transform the acquired current signal into frequency domain. And then, frequency components are selected according to discriminate order calculated by variance As the next step, feature extraction is performed by principal component analysis (PCA). Finally, we used the classifier based on Extreme Learning Machine (ELM) with fast learning procedure. To show the effectiveness, the proposed diagnostic system has been intensively tested with the various data acquired under different electrical and mechanical faults with varying load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.55-64
• /
• 2010

In this paper, we propose a new compensation scheme for combined channel distortions and RF impairments based on the analysis of the impacts of IQ(In-phase/Quadrature) imbalance and phase noise on the OFDM(Orthogonal Frequency Division Multiplexing) system in the direct conversion transceiver and frequency selective fading channel distortion. The proposed scheme estimates the combined distortion by the use of training symbols and the residual distortion by pilot symbols and compensates the combined distortion, including IQ imbalance, phase noise and multipath fading at the same time. The simulation results show that the proposed scheme compensates the combined distortion of IQ imbalance, phase noise and multipath fading simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.31-37
• /
• 2010

Based on the analyses of satellite range measurement, the optimal operation for satellite range measurement of KOMPSAT II, which operates in the low-earth orbit, was proposed in this paper. The orbital motion of the satellite was analyzed in viewpoints of radial velocity, acceleration and speed of acceleration. Correspondingly the effects for satellite ranging signal due to satellite motion were analyzed in viewpoints of doppler phenomena, which are doppler frequency, doppler rate and speed of doppler rate. The accuracy and ambiguity probability of the satellite range measurement were quantitatively analyzed under various circumstances. The optimal operation parameters for satellite range measurement were also analyzed based on the analyzed results. The analyzed results in this paper can be utilized in design of small-sized ground station for satellite range measurement.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.349-358
• /
• 2019

This paper aimed at collecting sensor signals to extract characteristic parameter of the rotor. A vibration test rig has been developed to perform model tests. Signal characteristics were analyzed when driving normally. Envelope FFT Analysis is used to extract vibration components caused by periodic impacts from other vibration factors. Signal analysis was performed when load changes were given to speed sensors and vibration test rigs that show low frequency characteristics of the rotor and signal analysis according to rotational speed. The acceleration signal measured in the bearing housing has a small amplitude and produces only the rotational frequency component and harmonic component of the motor. As the number of rotations increases, the amplitude of acceleration can be seen. As the rotational speed increases, it can be seen that there is a difference in the shape of the original data and compared with the acceleration FFT graph, it can be seen that the noise is strong at low frequencies and the corresponding rotational frequency components are clearly represented. It can be seen that changing the load does not increase the main rotational frequency component.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.805-808
• /
• 2001

음성인식, 합성 및 분석과 같은 음성신호처리 분야에 있어서 기본주파수 즉, 피치를 정확히 검출하는 것은 중요하나 만일 음성신호의 기존주파수를 정확히 검출할 수 있다면 음성인식에 있어서 화자에 따른 영향을 줄일 수 있기 때문에 인식의 정확도를 높일 수 있고, 음성합성 시에 자연성과 개성을 쉽게 변경하거나 유지할 수 있다. 또한 분석시 피치에 동기 시켜 분석하면 성문의 영향이 제거된 정확한 성도 파라미터를 얻을 수 있다. 따라서 제안한 논문에서는 시간영역처리에서 시간영역파형에서 먼저 성도성분이 제거된 성문특성 즉 피치주기 성분을 강조하기 위해 음성신호의 기울기를 이용한 Positive 센터 클리핑를 수행하고 주파수 영역에서는 원신호의 스펙트럼과 센터클립된 신호의 스펙트럼과의 Peak-Fiting을 수행하고 선형 인터폴래이션(스무딩)을 통해 평탄화된 스펙트럼을 얻었다. 결과적으로 유성음 구간과 음성이 변하는 전이구간에서 G-peak가 강조된 더욱 정확한 Pitch를 검출할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.379-385
• /
• 2002

In this paper, frequency trifler fur 8 GHz local oscillator was designed and fabricated using MESFET. The third order harmonic was generated by biasing the transistor on A class. The fundamental frequency and the second harmonic were suppressed by using λ$\_$g//2 stub and band pass filter. As results, conversion gain of 2.67 ㏈ at 8.31 GHz, the harmonic suppression of -41.17 ㏈c, the bandwidth of 510 ㎒ were measured.red.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2000.11b
• /
• pp.75-80
• /
• 2000

본 논문은 영상복원을 역확산 과정으로 해석하여 복원된 영상을 역확산 방정식의 해로 구하는 알고리즘을 제안한다. 역확산 과정은 물리적으로 불량위치(ill-posed)과정이기 때문에, 이를 정규화 해주어야 하는데 이를 위해서 역확산 과정을 고유함수(eigenfunction)들의 전개로 나타낸 후에 고유함수들의 계수들을 조작하였다. 본 논문에서는 계수들을 조작할 때 영상이 가지고 있는 주파수 특성을 고려하여 한계주파수(cut-off frequency)를 넘은 경우에 계수들을 시간과 주파수의 감소함수로 나타내어 불량위치문제를 해결하였다. 계수를 주파수에 대한 감소함수로 나타낸 것은 영상에 저주파 성분이 많고, 고주파 성분이 영상의 형성에 끼치는 영향이 상대적으로 적다는 영상의 특성을 고려한 것이다. 이러한 감소함수를 사용하였을 때 불량위치 문제를 해결할 수 있다는 것을 증명하였고, 실험적으로 양질의 영상을 산출함을 보였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1004-1005
• /
• 2015

본 논문에서는 고정주파수에서 제어되고, LCL 공진성분을 가지는 풀-브리지 형태의 dc-dc 컨버터에 대해서 논의하였다. 제안된 컨버터는 부하에 관계없이 컨버터 이득이 동일한 출력값을 가지는 주파수를 가지는 지점에서 동작하게 된다. 특히, 컨버터에서 부하변동에 대한 특성은 부하에 따른 컨버터의 스위치 전류에 대한 특성을 확인하기 위해서 공진탱크에 대한 입력 임피던스와 출력 임피던스를 크기와 위상을 부하변동에 따른 주파수 특성을 분석하였다. 이와 같이 제안된 컨버터에 대한 특성을 확인하기 위해서 요구사항에 적절한 성분을 선정하여 컨버터를 설계 및 제작하였다. 실험결과는 부하변동에 따른 컨버터의 특성을 검증하기 위해서 수행되었다.