• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.368-374
• /
• 2016

This paper presents constructing transmitter and receiver by using a direct sequence spread spectrum techniques to DPSK (Differential Phase-Shift Keying) scheme in underwater acoustic communication. Since DPSK signal can be demodulated if the receiver knows only the phase difference between the adjacent bits, DPSK receiver structure has the advantage of being simplified. In the conventional receiver, two adjacent symbols of transmitted signal before despread are passed to the transition correlator that detects data by comparing maximum correlation outputs. At this time, the error for maximum value of the correlator output may increase because of low SNR (Signal to Noise Ratio) or high Doppler shift frequency according to the underwater channel. In this paper, we propose a method for accurate detection result using the width as well as the magnitude among outputs produced by the correlator. The performances of the proposed method was evaluated by simulation and lake trial data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.211-224
• /
• 1994

In this paper, a multi-level adaptive intraframe method has been proposed to separate the luminance and chominance components in NTSC composite signal. The control signals are generated by detecting the vertical correlation and transition in the horizontal and diagonal directions. The chrominance component is adaptively processed through vertical and horizontal filters according to the control signals and the luminance component is processed by subtracting the chrominance component from the composite video signal. The several filters have been used at the sampling rate of four times the color subcarrier frequency and computer simulation and SVP(Serial Video Processing) system have been introduced to compare the performance of the conventional methods and that of proposed one.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.28-29
• /
• 2017

기존의 위상천이 풀 브리지 DC/DC 컨버터의 경우 변압기의 누설 인덕턴스와 2차 측 정류 다이오드의 기생 출력 커패시턴스 사이의 공진으로 인하여 정류 다이오드 양단에 큰 공진 전압이 발생하며, 이는 소자의 신뢰성 저하 및 시스템의 전력 변환 효율을 감소시킨다. 반면 LLC 공진형 컨버터는 2차 측에서 발생되는 공진 에너지가 출력 커패시터로 흡수되지만 경 부하시에 높은 스위칭 주파수로 인하여 효율이 저감되며, 출력 전압을 제어하기 위해 추가적인 부하저항이 요구된다. 따라서 최근에는 LLC 공진형 컨버터로 동작시키면서도 PWM 제어를 통해 출력전압을 제어하는 방법이 연구되고 있으나, 새로운 게이트 구동 방식을 위해 DSP 제어를 사용하고 있다. 따라서 본 논문에서는 산업에서 많이 사용되고 있는 아날로그 IC를 통해 동일한 동작 및 성능을 구현시킬 수 있는 방법에 대하여 제안한다. 본 논문에서는 제안된 방식의 타당성을 검증하기 위하여 이론적으로 분석하며, 6.6kW급 시작품을 제작하여 제안방식의 타당성을 검증하였다.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.409-416
• /
• 2007

The ambiguity and performance of range measurement for COMS using tone standard was analyzed with assuming that satellite is operating at transfer-station and on-station. From the results of analysis, it was shown that the ambiguity was reduced when low frequency ratio between tone signals and large number of minor tones are applied. It was also found that using the narrow noise bandwidth leads to decrease the ambiguity. As a result, required performance of range measurement for COMS can be satisfied when the noise bandwidth is set as 2Hz for transfer-station and 1Hz for on-station, respectively.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.410-416
• /
• 2023

Unlike geostationary satellite communication systems, low-earth orbit(LEO) satellite communication systems move at relatively high speeds, and the angle with the ground device is not fixed and varies over a wide range. The propagation channel condition between satellites and ground nodes cannot be assumed line of sight(LOS) anymore. This paper analyzes the low-orbit multi-path fading satellite channel model that can occur in LEO satellite communication systems and Doppler frequency transition caused by high-speed maneuvering of LEO satellites and presents effective equalization techniques for OFDM and SC-FDE transmission methods suitable for multi-path frequency selective fading satellite channel models. In addition, this paper compares and analyzes the performance of OFDM and SC-FDE transmission methods in multipath fading LEO satellite channel environment using the proposed equalization techniques through simulations. Simulation results showed that SC-FDE outpeformed OFDM.

• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.36-44
• /
• 2000

A frequency-shifting technique that uses a digital filter in order to interpolate a bandpass-sampled signal at a low-pass position is investigated. The discussion focuses on the derivation of the required digital filter. It is shown that second-order bandpass sampling offers more flexibility than first-order bandpass sampling in the sense of sampling frequency choice. It is also shown that the well-known quadrature-sampling method for frequency-shifting is a special case of the general second-order sampling technique. The advantages of the mixer-free digital quadrature demodulations are increased flexibility for sampling frequency choice and high precision for I/Q component extraction, and this type of modulation can be applied for modern radar signal processing with high performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.4
• /
• pp.247-252
• /
• 2009

This paper presents an Integer-N phase-locked loop (PLL) frequency synthesizer using a novel prescaler based on a charge pump and clock triggering circuit. A quadrature VCO has been designed for the 900MHz UHF RFID application. In this circuit, a voltage-controlled oscillator(VCO), a novel Prescaler, phase frequency detector(PFD), charge pump(CP), and analog lock detector(ALD) have been integrated with 0.35-${\mu}m$CMOS process. The integer divider has been developed with a verilog-HDL module, and the PLL mixed mode simulation has been performed with Spectre-Verilog co-simulator. The sweep range of VCO is designed from 828 to 960 MHz and the VCO generates four phase quadrature signals. The simulation results show that the phase noise of VCO is -102dBc/Hz at 100 KHz offset frequency, and the maximum lock-in time is about 4us with 32MHz step change (from 896 to 928 MHz).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1734-1741
• /
• 2007

In this paper, the Hybrid SC/MRC-2/4 method in which bit synchronization and phase synchronization were not required was applied to the orthogonal MC DS-CDMA system in which each normalized subcarrier interval and processing gain had the same value, respectively, and the direct sequence spread code of each subcarrier was orthogonal. In the broadband wireless system in which multi-carrier transmission was used, a Doppler frequency shift occurred, which was caused by the difference between the highest subcarrier frequency md the lowest subcarrier frequency. In order to complement phase error caused by the shift, the orthogonal MC DS-CDMA system was analyzed so that the receiving signal could be perfectly synchronized by adjusting the PLL gain suitable for the entire system. As a result of simulations, as the PLL gain was increased, the change in the intervals was close to the case of perfect synchronization however, it became less when the PLL gain reached more than a certain value. Therefore, by selecting a proper PLL gain suitable for the system the orthogonal MC DS-CDMA can be designed in which the Hybrid SC/MRC method is applied.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.85-91
• /
• 2012

In this paper, we implemented a Ka-band frequency synthesizer for millimeter wave seeker. we designed for high frequency resolution and frequency hopping response time in the digital synthesis method which uses DDS(Direct Digital Synthesizer). but frequency bandwidth was limited low frequency because DDS output frequency was limited 1/2 by system clock. thus, frequency synthesizer was converted to Ka-band using the frequency multiplier ${\times}4$ and local oscillator. proposed frequency synthesizer was bandwidth 500MHz, frequency switching time was $0.7{\mu}s$, spurious level was suppressed below -52dBc. phase noise was -99dBc/Hz at offset 100kHz and flatness was ${\pm}1dB$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.70-74
• /
• 2015

In this paper, two-dimensional resonant transmitter and receiver for WPT is designed and implemented using method that use $90^{\circ}$ phase shifted input power to orthogonal transmitter. Mutual inductance is minimized by using proposed each orthogonal coil of receiver and the method that inputs $90^{\circ}$ phase shifted power is used to radiate magnetic energy into two dimension. This method facilitates two dimensional resonant WPT by solving power efficiency degradation problem according to location in general WPT. The resonance frequency is 6.78 MHz and the distance between transmitting and receiving resonator is 200 mm. The transfer efficiency of the proposed wireless power transfer system is higher than 40 % at all direction.