• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.419-426
• /
• 2015

The purpose of this study is to investigate experimentally the optimum mix design and site application case of soil mixing wall (SMW) method which is cost-effective technique for construction of walls for cutoff wall and excavation support as well as for ground improvement before constructing LNG storage tank typed under-ground. Considering native soil condition in site, main materials are selected ordinary portland cement, bentonite as a binder slurry and also it is applied $1,833kg/m^3$ as an unit volume weight of native soil, Variations for soil mixing wall are as followings ; (1) water-cement ratio 4cases (2) mixing velocity (rpm) 3levels (3) bleeding capacity and ratio, compressive strength in laboratory and site application test. As test results, bleeding capacity and ratio are decreased in case of decreasing water-cement ratio and increasing mixing velocity. Required compressive strength (1.5 MPa) considering safety factors in site is satisfied with the range of water-cement ratio 150% below, and test results of core strength are higher than those of specimen strength in the range of 8~23% by actual application of element members including outside and inside in site construction work. Therefore, optimum mix design of soil mixing wall is proposed in the range of unit cement $280kg/m^3$, unit bentonite $10kg/m^3$, water-cement ratio 150% and mixing velocity 90rpm and test results of site application case are satisfied with the required properties.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.20-28
• /
• 1999

Nine soil media when placed over a plastic sheet with three seeding rates were evaluated for influence on covering rate, height, growth, surface hardness, tear strength and sod establishment of Kentucky bluegrass. 1. Bark, peat and vermiculite over a plastic sheet had good effect in terms of the establishment of Kentucky bluegrass sod. 2. The good establishment of Kentucky bluegrass sod grown on bark, peat and vermiculite over a plastic sheet seemed to be caused by physical and chemical properties of each soil medium. 3. Sand, sandy loam, perlite and peatmoss caused poor effects on the covering rate, the growth, and the tear strength of Kentucky bluegrass. 4. Optimum seeding rate was $10g/m^2$ in terms of density and competition. 5. Good quality sod more depended on soil media than on seeding rates in this study.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.45-54
• /
• 2006

The Construction policy of government ever since 1970s have brought the economical growth, but has been causing environmental problems. Most roads were paved either asphalt concrete or portland cement concrete. These types of pavements has caused to rise temperature by making local heat islands in urban during summer time. Recently the wet-mixing solidified soil pavement, a kind of soil-cement, has developed and has been applied to the environment-oriented pavement. The solidified soil wet-mixed is placed on the subgrade along with asphalt concrete and portland cement concrete. Thermistors are laid in these field test pavements. The temperature gradients of these pavements are automatically measured with time. As the results of this test, the equation estimating surface temperature of pavement is proposed by analyzing measured temperature data. It is shown that the temperature change within the surface layer due to the change of air temperature is the greatest in the asphalt mixture and the least in the solidified soil mixture. Since it is proven that this wet-mixing solidified soil pavement emit less radiant heat than other existed pavements. Therefore this type of pavement can be successfully applied to the roads, such as walks, parkways, and bikeways, which are required to be human-friendly and environment-oriented.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.26-30
• /
• 2008

This study was carried out to develop artificial culture method of Grifola frondosa in polypropylene bag. To find out the favorable substrate formulation of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55 : 25 : 12 : 8) mixing ratio of oak sawdust, oak chip, dried bean-curd refuse and wheat bran showed the shortest time to complete the crop cycle and the highest yield (weight of fresh mushrooms harvested at maturity). Those physicochemical conditions were pH 4.3, 2.4% crude fat contents, 54.1% total carbon, 1.42% total nitrogen, 38.1 C/N ratio, 75.5% porosity and $0.21\;g/cm^3$ bulk density. Among the physicochemical factors, pH, crude fat and total nitrogen may affect mushroom yield. Therefore, development of favorable substrate would be benefit to increase production efficiency of G. frondosa, mushrooms and be commercial potential.

• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.285-293
• /
• 2017

Although there have been continued researches on the effect of fatigue among organization members on organizations, there has been an absence of studies on sub-factors of organizational commitment using Saito(1999)'s whole questionnaire. Therefore, this study aimed to measure the level of fatigue among police officers and empirically examine the effect of fatigue on organizational commitment. Based on the previous studies, fatigue(mental fatigue and physical fatigue) of police officers and physical disharmony were selected as independent variables, and organizational commitment(affective commitment, continuance commitment and normative commitment) was selected as a dependent variable. The meanings and the implications of this study are as follows. First, from a theoretical perspective, this study has significance as the first study, which used Saito(1999)'s whole scale and examined the relationship between sub-variables of organizational commitment in a police organization. This study also confirms the importance of fatigue management for organization managers. Second, from a perspective of organization management, this study implies that effort should be made to measure fatigue of police officers, who have 5 to 10 years of service and work as Senior patrol and sergeants and manage it actively on an organizational level, and there is a need to develop a training program for improving their attitudes towards organizations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.1
• /
• pp.137-142
• /
• 2016

We investigated the anti-proliferative effects of solar salt and purified salt (PS) on HepG2 human hepatocellular cancer cells as well as their effects on mRNA and protein expression of apoptosis- and cell cycle-related genes, including Bcl-2, Bax, p53, and p21. Each salt sample suppressed cancer cell proliferation when treated at a concentration of 0.5% or 1%. Especially solar salt from T salt field (SS-T) and solar salt from Y salt field (SS-Y) significantly suppressed proliferation of cancer cells in comparison with PS. Treatment of HepG2 cells with salt samples at a concentration of 1% suppressed expression of Bcl-2 and promoted expression of Bax, p53, and p21 at the mRNA and protein levels in comparison with the control group. Inductively coupled plasma optical emission spectrometry (ICP-OES) showed that SS-T and SS-Y had higher concentrations of Ca, Mg, S, and K than PS, and SS-T contained higher concentrations of these minerals than SS-Y. It seems that Na and mineral contents in solar salt may contribute to regulation of the genes. Taken together, salt, especially mineral rich solar salt, inhibits cancer cell growth by regulating apoptosis and cell cycle-related genes.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.81-87
• /
• 1999

Poly-acrylonitrile (PAN) based carbon fibers were stabilized under various tensions in the presence of air at about $200^{\circ}C$ and sequentially carbonized under some different gas environments in the range of 700 to $1500^{\circ}C$. The prepared carbon fibers were used for rechargeable lithium ion battery anode to investigate preparation parameters effects on electrochemical characteristics. It was found that the tension during stabilization, carbonization temperature and gas atmospheres affect the carbon fiber properties such as conductivity, mechanical strength, surface morphology and diffusion coefficient of lithium ion, which are closely related to the on electrolchemical properties as well as the charge/discharge characteristics.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.1
• /
• pp.41-47
• /
• 2012

An annular flow type of copper electrolysis reactor was setup in order to generate the copper ions to remove algae in water. The operating characteristics of the reactor and the effect of copper ion on algae have been considered. By controling the applied current, the copper ion concentration could be obtained as desired level and the faradaic efficiency was above 90%. When the flow rate was increased, the copper ion concentration was linearly decreased due to the dilution effect and the effect of concentration overpotential was insignificant. With the increase of pH in water, the copper ion concentration was linearly decreased and not affected by the conductivity of the water. The concentration of chlorophyll-a was sharply decreased with the increase of copper ion concentration. The algae was effectively removed as the copper ion concentration was above 0.2 ppm. There was no difference between the copper ions obtained by dissolving copper sulfate and those produced by copper electrolysis. The algae removal efficiency was above 90% after 5 days as the copper ion concentration was above 0.4 ppm.

• Korean Journal of Rural Living Science
• /
• v.4 no.2
• /
• pp.155-162
• /
• 1993

BIDANI is the action-research program. BIDANI aims to be truly a people's program embodying their own activities and aspiration. BIDANI sees an integrated development approach at the community level with participatory services embodied in a Barangay Integrated Development Plan(BIDP) designed by the people themselves. Community situational analysis is conducted by the people to identify the priority problems and potential resources in the barangay. Participatory planning, using the “bottom up” apporach, is exercised to formulate a BIDP. Proper motivation and advocacy encourage barangay people's participation. Accessibility and efficiency in the use of various services and resources of government and private agencies increase. Family groups who are at high-risk to malnutrition become aware of the importance of nutrition through their participation in development program activities. Integration of political and socio-economic concerns at the lowest level is operationalized. Implementation and sustainability of the program on a wider scale from a model project to a model program is facilitated through institutionalization at the municipal/city level with the mayor as the project director. “Top to bottom” planning through a City/Municipal Integrated Development Program(C/MIDP) interacts with “bottom up” planning at the barangay level. The establishment of a local Training School for Barangay Development(TSBD) in each municipality and city for continuing education of indigenous village workers and barangay people is a vital component for success and viability. The role of non-political entities such as academic institutions and non-government organizations, as catalytic agents of development, is stressed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.21-29
• /
• 2011

At existing skin detection methods using skin color information defined based on the prior knowldege, threshold value to be used at the stage of dividing the backround and the skin region was decided on a subjective point of view through experiments. Also, threshold value was selected in a passive manner according to their background and illumination environments in these existing methods. These existing methods displayed a drawback in that their performance was fully influenced by the threshold value estimated through repetitive experiments. To overcome the drawback of existing methods, this paper propose a skin region detection method using a histogram approximation based on the mean shift algorithm. The proposed method is to divide the background region and the skin region by using the mean shift method at the histogram of the skin-map of the input image generated by the comparison of the similarity with the standard skin color at the CbCr color space and actively finding the maximum value converged by brightness level. Since the histogram has a form of discontinuous function accumulated according to the brightness value of the pixel, it gets approximated as a Gaussian Mixture Model (GMM) using the Bezier Curve method. Thus, the proposed method detects the skin region by using the mean shift method and actively finding the maximum value which eventually becomes the dividing point, not by using the manually selected threshold value unlike other existing methods. This method detects the skin region high performance effectively through experiments.