• Title/Summary/Keyword: 주의영역

Search Result 716, Processing Time 0.027 seconds

Towards remote sensing of sediment thickness and depth to bedrock in shallow seawater using airborne TEM (항공 TEM 을 이용한 천해지역에서의 퇴적층 두께 및 기반암 심도 원격탐사에 관하여)

  • Vrbancich, Julian;Fullagar, Peter K.
    • Geophysics and Geophysical Exploration
    • /
    • v.10 no.1
    • /
    • pp.77-88
    • /
    • 2007
  • Following a successful bathymetric mapping demonstration in a previous study, the potential of airborne EM for seafloor characterisation has been investigated. The sediment thickness inferred from 1D inversion of helicopter-borne time-domain electromagnetic (TEM) data has been compared with estimates based on marine seismic studies. Generally, the two estimates of sediment thickness, and hence depth to resistive bedrock, were in reasonable agreement when the seawater was ${\sim}20\;m$ deep and the sediment was less than ${\sim}40\;m$ thick. Inversion of noisy synthetic data showed that recovered models closely resemble the true models, even when the starting model is dissimilar to the true model, in keeping with the uniqueness theorem for EM soundings. The standard deviations associated with shallow seawater depths inferred from noisy synthetic data are about ${\pm}5\;%$ of depth, comparable with the errors of approximately ${\pm}1\;m$ arising during inversion of real data. The corresponding uncertainty in depth-to-bedrock estimates, based on synthetic data inversion, is of order of ${\pm}10\;%$. The mean inverted depths of both seawater and sediment inferred from noisy synthetic data are accurate to ${\sim}1\;m$, illustrating the improvement in accuracy resulting from stacking. It is concluded that a carefully calibrated airborne TEM system has potential for surveying sediment thickness and bedrock topography, and for characterising seafloor resistivity in shallow coastal waters.

The Implementation of e-Learning System for the Dress Unit in the Subject of Technology & Home Economics in the Middle School (중학교 기술.가정과 옷차림 단원 학습을 위한 e-러닝 시스템 구현)

  • Lee, Young-Lim;Cho, Hyun-Ju
    • Journal of Korean Home Economics Education Association
    • /
    • v.21 no.2
    • /
    • pp.45-60
    • /
    • 2009
  • This study is intended to implement an e-Learning system assisted class for the dress unit in the subject of technology & home economics in the middle school. This class is aimed at making teaching-learning in the dress unit effective, triggering students' interest in it, enhancing their understanding and offering basic materials for the e-Learning development about clothing instruction in the subject of technology & home economics. To make the concrete situational learning effective and provide realistic learning environments, learning contents were implemented so that the learners themselves could manipulate the contents by clicking. How to wear clothing according to learners' individuality was presented in order to trigger the learners' attention and motivation using the latest clothing pictures from the Internet shopping mall, and the dress fashion pictures of their peers. The result of this study can be summed up as follows. First, the implementation of learning materials with which simulation manipulation and visualization were possible could make the students reach the learning goals easily. Second, teaching-learning activity could be made more effective using audios, images and moving pictures rather than written texts. Third, learning the dress unit, which is especially related with a new fashion, made the most of the advantage of e-Learning by providing realistic and lively learning materials in a timely manner. And it triggered learners' motivation by providing pictures or moving pictures related with their real life. Based on these research results, this study suggests further research to develop e-Learning contents using various multimedia authoring tools as well as the ones applied to this study in learning the dress unit. It also suggests that the database of teaching-learning materials be constructed to securely prepare abundant instruction materials.

  • PDF

The Analysis of Content Regulation on Social Network Service(SNS): Focusing on the Problem of Legal and Administrative Regulation (표현매체로서 SNS(Social Network Service)에 대한 내용규제의 문제점 분석: 법률적.행정적 규제를 중심으로)

  • Hwang, Yong-Suk
    • Korean journal of communication and information
    • /
    • v.58
    • /
    • pp.106-129
    • /
    • 2012
  • Social Network Service(SNS), which are an emerging form of political architecture, have been a political means to promote civic engagement and shape pubic opinions on social issues. Along with the influence of SNSs, the governmental control on the dissemination of information over SNSs has increased more and more. It would be ideal if the autonomous governance regulates SNSs which facilitate the networks of the dispersed people. It is the fact, though, that compulsory regulations under which the government controls impose policy and legal restrictions on political expressions. The current study addresses expressive and participatory nature embedded in technological characteristics of SNSs and discusses the problems of content regulations of political expression over SNSs. First of all, it is analyzed that light touch regulation or light touch monitoring should be applied to regulating content on SNSs, particularly political expressions. Constitutional Court proclaimed that legal restrictions on the Internet could infringe basic rights of the people and thus under unambiguous standards, the Doctrine of Clear and Present Danger should be applied to its content. Second, it is found that clarifying the definition of illegality in the application of legal restrictions is necessary to minimize the excessive misleading. Third, it is required that Korea Communications Standards Commission under the government control needs to change in determining the scope of illegal information. In a domestic level, there needs to be safeguards for the protection of the self-regulatory organization such as KISO to guarantee voluntary and autonomous regulatory practices.

  • PDF

Third Party's Legal Interest Protection from Commercialization of Drones -A focus on Decision of the German District Court- (카메라 장착 드론에 대한 지상 제3자의 법익 보호 - 독일의 하급심 판결을 중심으로 -)

  • Kim, Sung-Mi
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.35 no.1
    • /
    • pp.3-32
    • /
    • 2020
  • With controlling Drones, although it was discussed in the previous study which showed a possibility. Which is personality and property rights of third parties could be violated while operating the drone with a video camera. But It's hard to find out precedents related to drones in Korea. In case of that someone try to control the drone which is equipped with a camera in a yard of neighborhood, the German District Court (Potsdam) considered an operator of drone has little bit of careless to do his duty and admit nonfeasance claim in the owner of the one's property for prevention to repetition of similar situation according to a nonfeasance claim for prevention to Section 1004 (1) sentence 2 of the German Civil Code(BGB). The drone which is equipped with a camera have possibilities to disrupt property and personal rights of the owner. Because a danger in repetition is getting larger regarding the violation of law. Moreover, there is a case that someone shot down the drone which is equipped with a camer. Because it has a risk to interrupt private life and cause some dangerous in our life. The German district court(Riesa) recently have considered that controlling the drone with a camera in private spaces is illegal as a violation of personal life. In addtion to, the action of property owner shot down drone is a legal according to § 228 of the German Civil Code(BGB) which is caleed "Necessity". Although it is difficult to apply to foreign cases directly to Korea, similar cases are likely to be occurred in Korea. The decision of the German District Court showed implications to Korea. As demand for the camera-equipped drone increases in Korea, it is time to discuss specific measures for drone violations.

Manufacturing and Characteristics of Korean Traditional Liquor, Hahyangju Prepared by Saccharomyces cerevisiae HA3 Isolated from Traditional Nuruk (전통 누룩으로부터 분리된 Saccharomyces cerevisiae HA3을 이용한 하향주의 제조 및 특성)

  • Jung, Hee-Kyoung;Park, Chi-Duck;Park, Hwan-Hee;Lee, Gee-Dong;Lee, In-Seon;Hong, Joo-Heon
    • Korean Journal of Food Science and Technology
    • /
    • v.38 no.5
    • /
    • pp.659-667
    • /
    • 2006
  • In order to standardize the manufacturing processes of Hahyangju, a traditional Korean liquor, 29 yeast strains were isolated from traditional Nuruk. Strain N8 exhibited a particularly strong resistance to sugar. Strains HA2, HA3 and HA4 grew successfully in medium containing 10% ethanol. In comparison with the growth exhibited by these strains when grown in a yeast malt extract medium, the ethanol production rates for the three strains were 10.8%, 10.45%, and 10%, respectively in a yeast malt extract medium containing 25% glucose. Based on these results, HA3 was the strain selected for use in the manufacturing processes of Hahyangju and it was identified as a Saccharomyces cerevisiae strain with 97% ITS sequence similarity. The use of Saccharomyces cerevisiae HA3 causcd a decrease in the lactic acid content, acidity and growth of lactic acid bacteria in the fermentation mash. Following thc addition of Saccharomyces cerevisiae HA3 to the manufacturing process of Hahyangju, the second fermentation mash showed a 22% increase in the alcohol production rate associated with traditional fermentation; however, the amino acidity, pH and reducing sugar content showed little change. Sensory evaluation of Hahyangju fermented with S. cerevisiae HA3 also showed better scores than Hahyangju mashed by the traditional method.

Vibration Test for PCB/Connector Assembly (인쇄회로기판 진동이 커넥터에 미치는 영향)

  • 허남일;김성철;송규섭
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.160-164
    • /
    • 1995
  • 정보통신 시스템의 고속/고밀도화 요구에 따라 개발되고 있는 ATM(Asynchronous Transfer Mode) 교환기 시스템은 팬을 이용한 강제대류냉각 방식의 채택과 시스템이 설치되는 장소에 따른 여러 환경조건에 의한 진동 문제가 발생될 수 있다. 시스템의 진동으로 인한 피해중 커넥터 접촉부에서 전기적 특성의 변화는 고속으로 전송되는 신호의 왜곡을 유발시킬 수 있어 시스템 개발시 이에 대한 충분한 연구 및 시험이 요구되고 있다. 진동환경에서 커넥터 접촉부는 접촉면의 상대운동으로 인한 접촉저항의 증가와 순간적인 신호전달 중단을 가져오게 되며, 특히 PCB/Connector Assembly에서 커넥터 접촉부는 PCB(Printed Circuit Board)의 장착 조건 및 동적 거동에 따라 전기적 특성이 변할 수 있다. 시스템에서 커넥터의 동적 거동을 이해하기 위해서는 PCB를 포함하는 시스템내 여러 요소의 동적 특성 이해와 복잡한 해석과정이 요구되며, 시스템 개발자는 진동 환경에서 이것의 시험 결과에 따라 커넥터의 사용을 결정해야 할 것이다. 커넥터의 전기적 특성 시험법은 IEC, EIA드 여러 국제 규격에 제시되어 있으며, 본 연구의 대상이 된 ATM교환기 시스템에서 PCB/Connector Assembly의 진동환경에서 접촉저항 측정과 관련된 접촉저항 임계치 및 측정법은 IEEE 규격 및 Bellcore 규격에 규정되어 있다. Bellcore에는 주어진 진동시험주기 전후에 IEC 규격의 LLCR(Low Level Contact Resistance) 측정회로를 이용한 측정법이 규정되어 있고, 냉각팬 및 주위 환경진동이 가해지는 동안의 영향에 대한 시험법은 규정되어 있지 않다. 본 연구에서는 한국통신의 전자장비 운용환경시험 조건의 진동에서 ATM 교환기 시스템에 사용되는 PCB/Connector Assembly 커넥터 접촉부의 접촉저항 변화와 PCB 진동에 의한 영향을 시험하였다.proach)등이 제시되었고 평면파 영역에 한하여 해서되어져 왔다. 본 논문에서는 분할 접근 방법(Segmentation Approach)을 이용하여 다공 요소로 이루어진 소음기를 해석하는데 적용하였다.로 성능 및 안정도에 영향을 미치므로 주의 깊게 선정해야 한다. 방법의 실질적인 적용에는 어려움이 있다. 본 연구에서는 기존의 방법들의 단점을 극복할 수 있는 새로운 회귀적 모우드 변수 규명 방법을 개발하였다. 이는 Fassois와 Lee가 ARMAX모델의 계수를 효율적으로 추정하기 위하여 개발한 뱉치방법인 Suboptimum Maximum Likelihood 방법[5]를 기초로 하여 개발하였다. 개발된 방법의 장점은 응답 신호에 유색잡음이 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field and the maximum relaxivity v

  • PDF

A Study on the Hybrid Policing of Policing Space Follow Character Alteration of Space (공간의 성격변화에 따른 Hybrid Policing의 치안활동 영역에 관한 이론적 고찰)

  • Seo, Jin-Seok
    • Korean Security Journal
    • /
    • no.11
    • /
    • pp.87-104
    • /
    • 2006
  • When the character of space could be dichotomized into the existing public space and private space, social order could be maintained by public policing only, Since enormous private property was formed and private space was enlarged by the development of capitalism, however, the necessity of private policing system came to the front. The large capitalists began to establish separate policing system to protect their property and safety. However, as social alteration was further diversified scale of economy was enlarged, the character of space could not be simply explained owing to the formation of space that could not be explained by simple dichotomous division. Namely, the 3rd space was formed as middle class between public space and private space. The 3rd space created additional demand of policing besides the existing public policing and private policing. The policing system to safety such demand of policing is called hybrid policing. As policing system in which character and legal status of public policing and private policing are mixed, the hybrid policing system may be originated from the diversification of demand of policing. Johnston insists that the demand of hybrid policing system will be further increased, becoming the model of policing system in the future. In Korea, the police guard system or special guard system can be classified into the type of hybrid policing. In accordance with the trend of diversified demand of policing in the future, I suggest to develop Korean model of hybrid policing system so that it can be utilized in elevating the policing index in Korean society.

  • PDF

Making Science Documentary: On the role of experts in the production of "Light" by EBS (과학 다큐멘터리 만들기: EBS의 <빛>의 제작과정과 자문위원의 역할을중심으로)

  • Moon, Jiho;Hong, Sungook
    • Journal of Science and Technology Studies
    • /
    • v.13 no.1
    • /
    • pp.145-180
    • /
    • 2013
  • STS studies into science documentaries for television are rare, and they do not even reflect the constructivist fruits of STS. STS have been calling for the need of analyzing 'science-in-the-making' in order to understand science more deeply. Similarly, our starting point is the assumption that science documentary can be better understood when we look into its making process. Under this assumption, we adopted the method of participant observation in analyzing 'documentary practice', trying to open the 'black box' called 'science documentary'. We have here focused on the documentary named "Light" made by a scientific documentary team of EBS, who made "Culture and Mathematics" and "Life". Each of us worked as a main consultant and an assistant staff in making "Light". We will address two main points in this study. First, based on our participant observation and interviews, we will show that the members of documentary making team are thinking about 'science' in distinctive ways. The team tended to emphasize visualization, knowledge linked to people's everyday life, and the distinctive characters of scientists who appear in the documentary. Second, by looking closely into the interaction between the team members and the consultant in the process of completing the script of the documentary, it was possible to understand how the contents of the documentary was constructed more accurately. In the making process, consultant's idea was not simply accepted by the making team, but there were conflicts and compromises. By showing this, we will be able to bring up a reflexive question about the role of consultant in the process of making a science documentary.

  • PDF

Effect of Presurgical Nasoalveolar Molding in Unilateral Cleft Lip and Palate Infants (편측성 구순구개열 신생아에 대한 술전비치조정형장치의 효과)

  • Kim, Jin-Sun;Kim, Young-Jin;Nam, Soon-Hyeun;Kim, Hyun-Jung
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.40 no.3
    • /
    • pp.209-215
    • /
    • 2013
  • Cleft lip and palate, the most common craniofacial anomalies, are severe congenital defects that have an incidence of 0.28 to 3.74 per 1000 live births. Although there has been great improvement in the field of cleft surgery, surgical approach cannot be the single solution to resolve the various problems encountered in patients with cleft lip and palate. The concept of presurgical infant orthopedics (PSIO) for gradual closure of the cleft gap and simplified surgical performance was first introduced by McNeil in 1950. Recently, there are many attempts not only to approximate the alveolar segments but also to reshape the nasal cartilage. Three infants with unilateral cleft lip and palate were referred from the department of Plastic Surgery for presurgical nasoalveolar molding (PNAM). Maxillary appliances using resin with orthodontic wire were fabricated. Then these appliance was applied until patients underwent lip surgery. In all cases, the patients could wear the appliance all day since they were able to eat even with the appliance on, This resulted in significant improvements in the nasal symmetry were found. Our appliance, namely K-NAM, extends the wearing time within the limited period and as a result it is expected to maximize the treatment effects. Used properly, this appliance would play a major role in enhancing nasal symmetry with satisfactory results.

Recognition of the Nature of Science by Preservice Science Teachers on the Basis of the Atomic Model (원자모형에 기초한 예비과학교사들의 과학의 본성에 대한 인식)

  • An, Yu-La;Kim, Hyun-Joo
    • Journal of The Korean Association For Science Education
    • /
    • v.31 no.4
    • /
    • pp.539-556
    • /
    • 2011
  • The purpose of this study was to examine preservice secondary science teachers' understanding of the nature of science, by using nature of science (NOS) questionnaire on the basis of atomic model, and compare this to pre-studies. 'Understanding of nature of scientific model,' 'Tentativeness of scientific knowledge,' 'Subjectivity in science,' 'Use of inference and imagination,' 'Myths of the scientific method,' and 'Comparison between science and art.' were examined. Preservice teachers showed great comprehension of the tentativeness of scientific knowledge (the orbital model) and the subjectivity in science (the different interpretation about the experiment of particle scattering), but displayed the lowest comprehension of the scientific method. For understanding of nature of scientific model (the atomic model) and the comparison between science (Bohr's atomic model) and art (Picasso's work), preservice teachers brought out a combination of ontological and constructivist perspective and showed the contradictory thought about imagination in science research. In the result of comparison to pre-studies using the NOS instruments contains general terms, represented high levels of agreement about the tentativeness of scientific knowledge by using concrete examples of 'atomic model'. When concrete scientists such as Thomson, Rutherford, Bohr were presented, respondents revealed more informed views about the scientists' research method.