• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.49-60
• /
• 1991

Fatigue behavior of carbon fiber reinforced polyimide composite materials was studied experimentally and analytically. The physical variables, such as cyclic displacements and hysteresis loop energy were observed during fatigue tests. Fatigue life of the investigated [0/90]$_{2S}$ laminates was predicted by H'||'&'||'H models which was proposed based on the fatigue modulus and resultant strain. The predicted fatigue life by H'||'&'||'H curves was reasonably close to the experimental data. Fractography study shows that fatigue failure mechanism of [0/90]$_{2S}$ laminated composite materials involves failure break, matrix tearing and fiber-matrix debonding as well as delamination of layers.

• Journal of Korean Library and Information Science Society
• /
• v.34 no.4
• /
• pp.203-226
• /
• 2003

The purpose of this study aims to provide possible suggestions for the improvement of the korean Decimal Classification System in 21th century through the analysis of language field as the subject of study. As a result of this study, some problems(for example, irrational classification number system, very simplicity of $\ulcorner$Subdivisions of Individual languages md languages families$\lrcorner$, improper languages development insufficiency of note etc.) were found out. This study can be useful for the future revision of KDC4 because a revolutionary improvement were provided.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.233-235
• /
• 2017

Forklift tend to work in place rather than moving due to work environment conditions, so they express only the engine operation time without expressing the moving distance unlike a general car's instrument panel. Therefore, various consumables constituting the forklift have a replacement cycle according to the operation time of the engine. However, it is very difficult to judge the exact replacement cycle only by the engine operation time because the working environment differs for each forklift. In this paper, we propose a system that provides position information and moving distance information of forklift to driver using GPS and IMU sensor. By using this system, it is expected that the forklift status information, which is difficult to judge by the existing instrument panel, is provided as easier information, and economic benefits for forklift management and maintenance are expected.

• Nuclear industry
• /
• v.36 no.7
• /
• pp.39-45
• /
• 2016

원전 신규 도입을 계획하고 있거나 추진하고 있는 국가들에게 도움을 주기 위해 지난 2007년에 지침서를 발간한 바 있는 IAEA는 그 동안의 경험 등을 반영하여 이번에 새로운 개정판을 발간하였다.

• Journal of Energy Engineering
• /
• v.9 no.4
• /
• pp.366-371
• /
• 2000

본 연구는 동적형 빙축열시스템에 있어서 증발판이 축열조 상부에 설치되어 생성된 얼음을 주기적으로 분리, 이탈시켜 하부에 설치된 축열조에 저장하는 기존의 하베스트형 빙축열시스템과는 반대로 축열조 내에 증발판을 설치하여 수중에서 얼음을 생성시키고 분리시켜 부럭에 의해 얼음을 띄워 저장하는 새로운 방식의 수중 하베스트형 빙축열시스템 개발에 관한 연구이다. 본 방식은 축열조 내에 증발판이 설치되어 제빙과 탈빙이 이루어짐으로서 기존 시스템에 설치되는 순환펌프나 순환수 분배기 및 배관 등의 설비가 불필요하고, 또한 조내 물과 증발판이 직접접촉에 의해 열교환이 이루어지므로 기존 공기 중에서의 열교환 방식보다 전열효율이 우수한 장점을 가지고 있다. 따라서 본 연구에서는 상기의 수중 빙제조 방식에있어 빙 제조시와 방냉시 축열조의 열특성을 실험적으로 밝혀 시스템 최적화 및 성능 향상에 대한 기초 자료를 제공하고자 하였다.

• Journal of Korean Library and Information Science Society
• /
• v.40 no.2
• /
• pp.5-26
• /
• 2009

The purpose of this study aims to provide possible suggestions for the improvement KDC 5th ed. as a system. After analyzing and evaluating various devices of KDC 5th ed. such as schedules, common auxiliary tables, internal tables(omitted), notes, relative index, precedence order(omitted), alternatives, manual(omitted) and relocated table(omitted), suggestions for the improvement were proposed. If above suggestions are adopted, effective literature classification scheme which is suited to domestic circumstances will be certainly prepared.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2003

Based on the eigenfunction expansion method, the interaction between monochromatic waves and a partially immersed slotted plate with a back wall has been investigated. Analytical results show that the reflection coefficients by a partially immersed slotted plate depend on the porosity, immersed depth, chamber width, incidence angle and wave frequency. It is found that the reflection coefficient has minimum value within entire frequency range when the porosity has optimal value 0.1. Comparison between the analytical results and the experimental results(Zhu,2001) of reflection coefficients is made for various chamber widths, immersed depths and wave periods with good agreement. The present analytic method can account adequately for energy dissipation caused by flow separation behind a slotted plate and provide the design informations for the construction of slit caisson breakwater.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.1-13
• /
• 2000

상부벽식 하부골조를 가진 복합구조물은 부족한 대지를 효율적으로 활용하기 위하여 건설되고 있다. 이러한 복합건물은 상부벽식-하부골조를 가지는 구조로써 일반적으로 전이보 또는 전이판으로 상하부를 연결하고 있다. 따라서 상하부 구조사이의 강성과 질량에 많은 차이가 발생하게 된다. 구보물의 고유주기는 지진하중과 밑면전단력을 결정하기 위한 중요한 변수이다. 그러나 현재 국내 규준에서 제안하는 고유주기 산정식은 이러한 건물에는 적용할 수 없다. 본 연구에서는 상부벽식-하부골조를 가진 복합구조물의 고유주기의 산정에 영향을 미치는 변수들 중 가장 큰 영향을 미치는 건물의 상하부 층수에 따른 변수만을 고려하여 고유주기산정식을 제안하였다. 하부는 2~5개 층을 가지고, 상부는 10~18개 층을 가지는 15~20층의 건물이면 정형적인 평면을 가지는 복합구조물로 한정하였다. 건물 내부의 채움벽에 대한 효과를 고려한 고유주기 제안식은 다음과 같다. 장변 방향 : $T_{L}$=($0.20H_{h}+0.05H_{i}$)/$sqrt{B}$-0.42 단변 방향 :$T_{S}$=($0.07H_{h}+0.12H_{i}$)/$sqrt{B}$-0.40

• Journal of the Korean Society for Library and Information Science
• /
• v.47 no.3
• /
• pp.275-293
• /
• 2013

This study conducted comparative analysis of cataloging descriptions and rules in KCR 4 and CCR 2, as follows, for the purpose of seeking understanding of classical materials cataloging rules and networking of oriental historical data cataloging (bibliographical descriptions). First, to compare the general rules, the objects of descriptions and composition of descriptions, recording order, and punctuation and information source of descriptions were analyzed. As a result, KCR 4 is more detailed in terms of author role identifications and information source regulations and CCR2 is more detailed in terms of regulations related to printing and publications and serial publications. Second, to compare the details, the main titles and liability indications, edition details, publication details and format details, and note details. As a result, regarding the description of edition type and publication details, KCR4 has detailed regulations and CCR2 has characteristic summary in terms of note details.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.3
• /
• pp.170-179
• /
• 2019

In this study, the wave responses in a 'Y'shape water channel resonator for amplifying wave energy of a low density has been investigated. A water channel resonator is composed of the long channel and wave guider installed at the entrance. If the period of the incident waves coincides with the natural period of the fluid in a water channel resonator, resonance occurs and the internal fluid amplifies highly to a standing wave form. In order to analyze the wave response in a water channel resonator, we used the matched asymptotic expansion method and boundary element method. The both results were in good agreement with the results of the model test carried out in the two-dimensional wave tank of Jeju National University. Wave guider has an optimum length and installation angle according to the period of the incident wave, and especially effective in enhancing the amplification factor in a period range deviated from the resonance period. It is expected that the wave energy can be effectively extracted by placing the point absorber wave energy converter at the position of anti-node where the maximum wave height is formed by the internal fluid resonance.