• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.251-260
• /
• 2003

A three dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of deep, tapered rods and beams with circular cross section. Unlike conventional rod and beam theories, which are mathematically one-dimensional (1-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sup r/, u/sub θ/ and u/sub z/, in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in , and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the rods and beams are formulated, the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rods and beams. Novel numerical results are tabulated for nine different tapered rods and beams with linear, quadratic, and cubic variations of radial thickness in the axial direction using the 3D theory. Comparisons are also made with results for linearly tapered beams from 1-D classical Euler-Bernoulli beam theory.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.419-429
• /
• 2003

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies of thick, hyperboloidal shells of revolution. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sub r/, u/sub θ/, u/sub z/ in the radial, circumferential, and axial directions, respectively, we taken to be sinusoidal in time, periodic in θ, and algebraic polynomials in the r and z directions. Potential(strain) and kinetic energies of the hyperboloidal shells are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four digit exactitude is demonstrated for the first five frequencies of the hyperboloidal shells of revolution. Numerical results are tabulated for eighteen configurations of completely free hyperboloidal shells of revolution having two different shell thickness ratios, three variant axis ratios, and three types of shell height ratios. Poisson's ratio (ν) is fixed at 0.3. Comparisons we made among the frequencies for these hyperboloidal shells and ones which ate cylindrical or nearly cylindrical( small meridional curvature. ) The method is applicable to thin hyperboloidal shells, as well as thick and very thick ones.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2010

The Fourier series uses a vibrating wave that possesses an amplitude that is like the one of the sine curve. Therefore, the functions used in the Fourier series do not change due to the value of the frequency and that set a limit to express irregular signals with rapid oscillations or with discontinuities in localized regions. However, the wavelet series analysis(WSA) method supplements these limits of the Fourier series by a linear combination of a suitable number of wavelets. By using the wavelet that is focused on time, it is able to give changes to the range in the cycle. Also, this enables to express a signal more efficiently that has singular configuration and that is flowing. The main objective of this study is to propose a scheme called wavelet series analysis for the application of wavelet theory to one-dimensional problems represented by the second-order elliptic equation and to evaluate theperformance of proposed scheme comparing with the finite element analysis. After a through evaluation of different types of wavelets, the HAT wavelet system is chosen as a wavelet function as well as a scaling function. It can be stated that the WSA method is as efficient as the FEA method in the case of axial bars with distributed loads, but the WSA method is more accurate than the FEA method at the singular points and its computation time is less.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.153-159
• /
• 2005

Recently, various novel numerical models based on Navier-Stokes equation rave been developed for calculating wave motions in the sea with coastal or ocean structures. Among those models, Volume Of Fluid (VOF) method might be the most popular one, and it has been used for numerical simulations of wave motions including complicated phenomena of wave breakings. VOF method, however, needs enormous computation time and large computational storage memories in general, thus it is practically difficult to use VOF method for calculations in the case of random waves because long and stable computation ( e.g. for more than 100 significant wave periods) is required to obtain statistically meaningful results. On the other hand of the wave motion is potential motion, Boundary Element Method (BEM), which is a much faster and more accurate method than VOF method, am be effectively used. The aim of this study is to develop a new efficient model applicable to calculations of wave motion and/or wave-structure interactions under random waves. To achieve this, a strictly combined BEM-VOF model has been developed by making the best use of both methods' merits; VOF method is used in a restricted fluid domain around a structure where complicated phenomena of wave breakings may exist, and BEM is used in the other domains far from the disturbance where the wave motion may be assumed to be potential. The verification of the model was performed with numerical results for Stokes'5th order wave propagation and a random wave propagation.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.75-83
• /
• 2021

This study presented the analysis results and implications by identifying the structural relationship between the image of food tourism products, the long-term orientation of attachment, and the behavioral intention. The convenience sampling method of the non-probability sampling method was used, and the survey was conducted non-face-to-face due to COVID-19. This study was conducted for customers who live in Jeollabuk-do and Jeollanam-do and have experienced local traditional food. As for the survey method, the main researcher's acquaintances and related experts were consulted and utilized to select the survey subjects, and the survey was conducted by sending/returning them by mail or e-mail. Statistical processing was analyzed using SPSS 25.0 and AMOS 25.0 statistical packages. As a result of the verification, the relationship between the image and attachment of food tourism, the relationship between the long-term orientation in the attachment of traditional food, and the behavioral intention in the attachment of traditional food are significant. A significant positive (+) relationship was formed in the relationship of hypothesis setting according to the research purpose of the relationship.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.120-129
• /
• 2023

To evaluate the vertical loads on railway bridges, conventional load tests are typically conducted. However, these tests often entail significant costs and procedural challenges. Railway conditions involve nearly identical load profiles due to standardized rail systems, which may appear straightforward in terms of load conditions. Nevertheless, this study aims to validate load tests conducted under operational train conditions by comparing the results with those obtained from conventional load tests. Additionally, static and dynamic structural behaviors are extracted from the measurement data for evaluation. To ensure the reliability of load testing, this research demonstrates feasibility through comparisons of existing measurement data with sensor attachment locations, train speeds, responses between different rail lines, tendency analysis, selection of impact coefficients, and analysis of natural frequencies. This study applies to the Dongho Railway Bridge and verifies the applicability of the proposed method. Ten operational trains and 44 sensors were deployed on the bridge to measure deformations and deflections during load test intervals, which were then compared with theoretical values. The analysis results indicate good symmetry and overlap of loads, as well as a favorable comparison between static and dynamic load test results. The maximum measured impact coefficient (0.092) was found to be lower than the theoretical impact coefficient (0.327), and the impact influence from live loads was deemed acceptable. The measured natural frequencies approximated the theoretical values, with an average of 2.393Hz compared to the calculated value of 2.415Hz. Based on these results, this paper demonstrates that for evaluating vertical loads, it is possible to measure deformations and deflections of truss railway bridges through load tests under operational train conditions without traffic control, enabling the calculation of response factors for stress adjustments.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2013

Acoustic backscatter profiles were measured by Eco-sounder along an east-west section in the mid-eastern Yellow Sea and at an anchoring station in the low salinity region off the Keum River estuary in September 2012, with observing physical water property structure by CTD. Tidal front was established around the sand ridge developed in 50 m depth region. Internal waves measured by Eco-sounder during low tide period in the eastern side of the sand ridge were nonlinear depression waves with wave height of 15 m and mean wavelength of 500 m. These waves were interpreted into tidal internal waves that were produced by tidal current flowing over the sand ridge to the southeast. When weakly non-linear soliton model was applied, propagation speed and period of these internal depression wave were 50 m/s and 16~18 min. Red tides by Dinoflagelates Cochlodinium were observed in the sea surface where strong acoustic scattering layer was raised up to 7 m. Hourly CTD profiles taken at the anchoring station off the Keum River estuary showed the halocline depth change by tidal current and land-sea breeze. When tidal current flowed strongly to the northeast during flood period and land-breeze of 7 m/s blew to the west, the halocline was temporally raised up as much as 2 m and acoustic profile images showed a complex structure in the surface layer within 5-m depth: in tens of seconds the declined acoustic structure of strong and weak scattering signals alternatively appeared with entrainment and intrusion shape. These acoustic profile structures in the surface mixed layer were observed for the first time in the coastal sea of the mid-eastern Yellow Sea. The acoustic profile images and turbidity data suggest that relatively transparent low-layer water be intruded or entrained into the turbid upper-layer water by vertical shear between flood current and land breeze-induced surface current.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1363-1373
• /
• 2009

본 연구는 두 집단지성의 가장 대표적인 서비스인 네이버 지식iN과 위키피디아의 구조적, 경험적 차이를 바탕으로 생산의 차원에서 생산 주기, 생산 참여자, 생산물의 모델을 설정하고, 새롭게 탄생하는 지식을 중심으로 검증함으로써 최종 지식 소비 행위를 반영한 각각의 종합모델을 도출하였다. 우리는 웹에서 집단지성의 일상화를 확인할 수 있다. 지식 획득 매체가 매스미디어에서 인터넷으로 변화하는 과정에서 등장한 포털 및 검색사이트는 지식의 생산이 전문가패러다임에서 소비자 중심으로 재편될 수 있는 가능성을 열어주었다. 그리고 이러한 생산 방식의 변화는 '지식'의 개념 역시 변화시키고 있다. 즉, 집단지성이라는 새로운 웹2.0의 현상이 지식생산방식을 변화시키고 변화된 지식생산방식은 '지식'자체를 변화시킨다는 이론적 가설을 도출할 수 있는 것이다. 본 연구는 이러한 새로운 현상들을 분석하기 위해서는 먼저 보다 엄밀하게 집단지성의 개념을 규정할 필요성에 출발하였다. 현재 집단지성이라는 이름으로 불리면서 급격히 성장하고 있는 위키 방식의 인터넷 서비스와 지식검색 방식의 인터넷 서비스를 비교함으로써 보다 정교한 집단지성의 모델을 구축하고자 하였다. 위키형 집단지성과 지식검색형 집단지성의 차이점은 경험적으로도 뚜렷하게 확인할 수 있다. 본 연구는 이러한 경험적 차이와 기존의 문헌에서 밝혀진 사실들을 바탕으로 두 서비스의 지식생산 방식을 생산플로우, 생산참여자 성향, 생산물(지식)의 성향과 같이 세 영역으로 나누어 각각의 가설 모델을 설정하고 이 모델을 선정된 질의어를 바탕으로 검증한 뒤에 최종적인 모델을 도출하는 방식으로 진행되었다. 지식검색형 집단지성은 '질문-답변-채택'의 구조이고, 그 구조 속에서 '질문기-답변기-순서화기'를 거쳐 하나의 지식 덩어리인 'K-let'을 생산한다. 생산된 'K-let'들은 지식검색서비스의 데이터베이스에 축적되고, 이는 공통된 질의어를 기준으로 소비자들에 의해서 검색되어 소비된다. 하나의 질문에 대해 여러 개의 답변들이 존재하고, 답변자의 성향은 크게 전문성과 체계성을 바탕으로 한 전문가형 답변자와 경험적이고 의견지향적인 대화형 답변자로 나눠진다. 다수의 네티즌들의 참여에 의해서 지식의 생산이 진행되므로 질문의 성향 역시 사실, 의견, 경험 등 다양한 스펙트럼을 가지는 모델로 설정하였다. 반면에 위키형 집단지성은 개방형 플랫폼을 바탕으로 한 백과사전의 형식이며, 이러한 형식 속에서 최초의 개념어 등록과 다수의 편집활동을 거치면서 완성되지 않는 하나의 아티클인 'W-let'을 생산한다. 이러한 'W-let'은 생성 초기에 소수에 의한 활발한 내용 입력 활동으로 어느 정도의 안정화를 거친 후에는 꾸준한 다수의 수정활동을 통해서 'W-let'의 생명력을 유지함으로써 지식의 실제적인 변화를 반영한다. 생산된 'W-let'들은 위키형 집단지성 서비스의 데이터베이스에 축적되고, 이것들은 내부링크를 통해서 모두 연결되어 있다. 백과사전 형식으로 하나의 개념어를 설명하는 하나의 아티클은 오로지 사실적인 지식들로만 구성되나 내부링크와 외부링크를 통해서 다양한 스펙트럼을 가지는 모델로 설정하였다. 위와 같이 설정된 모델을 바탕으로 공통된 질의어 및 개념어를 선정하여 각각의 서비스에 노출시켰다. 이를 통해서 얻어진 각 서비스의 데이터베이스에 축적된 모든 데이터들 중에서 일정한 기간을 기준으로 각각의 모델 검증에 필요한 데이터를 추출하여 분석하는 방식으로 진행되었다. 그 결과 지식검색형 집단지성에서는 '질문-답변-채택'의 생산 구조 속에 다수가 참여하여 질문-채택답변-기타답변으로 배열되어 있는 완성된 형태의 K-let들을 지속적으로 생산하며 비슷한 성향을 가진 K-let들이 반복적으로 생산되어 지식검색 데이터베이스에 누적된다. 지식 소비자들은 질의어 검색을 통해서 다양한 K-let들을 선택하여 비교, 검토한 후에 선택된 K-let들의 배열은 해체되어 소비자들에 의해서 재배열됨을 발견할 수 있었다. 이에 지식검색형 집단지성이란 다수의 의해서 생산되고 누적된 지식들이 소비자의 검색과 선택에 의해 해체되어 재배열되는 지식의 맞춤화 과정이라고 정의내릴 수 있었다. 반면에 위키형 집단지성에서는 '내용입력-미세수정' 구조 속에서 생명력 있는 W-let을 생성한다. W-let은 백과사전처럼 정리되어 내부링크를 통해서 서로 연결되고, 외부링크를 통해 확장되고, 지식소비자들은 검색을 통해 최초의 W-let에 도달한 후에 링크를 선택함으로써 지식을 확장시킴을 검증할 수 있었다. 따라서 위키형 집단지성이란 다수의 의해서 생산되고 정리된 지식들이 소비자의 검색과 링크에 의해 무한히 확장되는 지식의 확대 재생산되는 과정이라고 정의 내릴 수 있다. 결국, 현재의 집단지성이란 지식이 다수의 참여로 생산됨으로써 개인에게 맞춤화되고, 끊임없이 확대 재생산되는 과정을 의미한다. 그리고 이러한 집단지성의 방식은 지식이라는 현재의 차원을 넘어서 정치, 경제를 비롯한 사회의 전 영역으로 점차적으로 확대되어갈 것이다. 앞으로 연구들은 두 가지 모델이 혼재되어 있는 현재의 집단지성이 어떠한 새로운 모델을 만들면서 다른 영역으로 확장되어갈 것인지에 대해서 초점을 맞춰 나가야할 것이다.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.3-24
• /
• 2013

This study has examined the relationship between entrepreneurial orientation(EO), dynamic capability(DC) and export performance of international new ventures(INVs). Also, the moderating effect of external environment factors(the hostility at domestic markets and the industrial dynamics) were analysed. Empirical analysis was performed on 101 INVs. It was conducted using the PLS(Partial Least Square). The result of empirical analysis showed that there is a positive relationship between EO, DC and export performance. The result of moderating effect showed that two external environment factors have positive moderating effect on the relationship between EO and DC. However, there was not moderating effect of external environment factors on the relationship between DC and export performance.