• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.55-61
• /
• 2009

This paper proposes a position estimation of a mobile robot based on USN(Ubiquitous Sensor Network) and encoder, and development of tele-operation system using Internet. USN used in experiments is based on ZigBee protocol and has location estimation engine which uses RSSI signal to estimate distance between nodes. By distortion the estimated distance using RSSI is not correct, compensation method is needed. We obtained fuzzy model to calculate more accurate distance between nodes and use encoder which is built in robot to estimate accurate position of robot. Based on proposed position estimation method, tele-operation system was developed. We show by experiment that proposed method is more appropriate for estimation of position and remote navigation of mobile robot through Internet.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.870-878
• /
• 2012

Recently, very rapid development of computer and sensor technologies induces various kinds of user interface (UI) technologies based on user experience (UX). In this study, we investigate and develop a smart touch projector system technology on the basis of IR sensor and image processing. In the proposed system, a user can control computer by understanding the control events based on gesture of IR pen as an input device. In the IR image, we extract the movement (or gesture) of the devised pen and track it for recognizing gesture pattern. Also, to correct the error between the coordinate of input image sensor and display device (projector), we propose a coordinate correction algorithm to improve the accuracy of operation. Through this system technology as the next generation human-computer interaction, we can control the events of the equipped computer on the projected image screen without manipulating the computer directly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.687-695
• /
• 2011

Many internet portals provide maps with spatial information services. Recently, various images including aerial, satellite, street view, and photo-realistic 3D city models are provided as well as maps. This study suggested a method for geometric correction of the panoramic aerial images in the internet portal and 3D building modeling using information which is available in the internet. The key of this study is to obtain all necessary data easily from internet without restrictions. Practically, the ground control coordinates could be available from geo-referenced internet maps, and stereo pairs of the aerial images and close-range photographs for photo-realistic object modeling are provided by the internet service. However, the ground control points are not suitable for accurate mapping. RMSE of the plotting was about 9 meters and reduced upto 4 meters after coordinate transformation. The proposed methods would be applicable to various applications of photo-realistic object modeling which do not require high accuracy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.661-667
• /
• 2011

Kinematic contact trigger probes are widely used for feature inspection and measurement on coordinate measurement machines (CMMs) and computer numerically controlled (CNC) machine tools. Recently, the probing accuracy has become one of the most important factors in the improvement of product quality, as the accuracy of such machining centers and measuring machines is increasing. Although high-accuracy probes using strain gauge can achieve this requirement, in this paper we study the universal economic kinematic contact probe to prove its probing mechanism and errors, and to try to make the best use of its performance. Stylus-ball-radius and center-alignment errors are proved, and the probing error mechanism on the 3D measuring coordinate is analyzed using numerical expressions. Macro algorithms are developed for the compensation of these errors, and actual tests and verifications are performed with a kinematic contact trigger probe and reference sphere on a CNC machine tool.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.115-125
• /
• 2011

The smartphones which have been recently are embedded with high resolution quality camera, assisted GPS, accelerometer, gyroscope and various sensors including magnetometer sensor that could be directly used for measurement. This study aims to suggest the possible application of smartphone camera providing high resolution images in terms of photogrammetry by calibrating it and assessing its accuracy. First of all, prior to the accuracy assessment of smartphone camera, camera calibration was conducted to correct lens distortion of each camera and the accuracy of image coordinates and object coordinates calculated by bundle adjustment during this procedure was analyzed. Also regarding three-dimensional positioning, result analysis depending on considering lens distortion coefficients was conducted, and finally relative accuracy of smartphone camera on metric camera was assessed. The result showed that in terms of distortion correction of smartphone camera, also higher order symmetric radial lens distortion coefficients should be considered, and three dimensional position determined by smartphone images was a little difference from that by metric camera. Therefore it is expected that smartphone images have huge possibility to be used for photogrammetry.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.274-280
• /
• 2011

The implementation of the recognition system of a vehicle license plate and the Linux OS environment which is built in SoC Embedded system and its test result are presented in this paper. In order to recognize a vehicle license plate, each character has to be extracted from the whole image of a license plate and the extracted image is revised for the template matching. Labeling technique and numerical features are used to detect the vehicle license plate. Each character in the license plate has coordinates. The extracted image is revised by comparison of the numerical coordinates and recognized through template matching method. The experimental results show that the license plate detection rate is 96%, and a character recognition rate is 73%, and a number recognition rate is 97% for about 300 license plate images. The average time of the recognition in the embedded board is 0.66 sec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.331-337
• /
• 2002

In this paper we propose extended Kalman filter (EKF)-trilateration method which associates EKF to conventional radiolocation technique, trilateration in order to improve the accuracy of dynamic orbit determination of geostationary satellite for broadcasting of highly accurate Standard Time/Frequency Signal (STFS). We then compare to analyze the time accuracies of three techniques which are differential mode, trilateration locating one of four calibrated earth stations on a neighboring country, and domestic-only baseline EKF-trilateration. Computer simulations have shown that in spite of domestic-only baseline EKF-trilateration of poor GDOP, it is possible to track and locate satellite with an accuracy of a few hundred meter which is the performance 10 times more accurate than trilateration can provide. Finally we can provide standard time service with the time accuracy better than a few ns (frequency stability : 10$\^$-14/ over 7 days) all around Korea peninsula.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.141-150
• /
• 2011

Precise image-to-image registration is required to process multi-sensor data together. The purpose of this paper is to develop an algorithm that register between high-resolution optical and SAR images using linear features. As a pre-processing step, initial alignment was fulfilled using manually selected tie points to remove any dislocations caused by scale difference, rotation, and translation of images. Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on their similarity. Outliers having larger geometric differences than general matching points were eliminated. The remaining points were used to construct a new transformation model, which was combined the piecewise linear function with the global affine transformation, and applied to increase the accuracy of geometric correction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.14-19
• /
• 2020

This paper proposes a precise drone-positioning technique using a differential global positioning system (DGPS). The proposed system consists of a reference station for error correction data production, and a mobile station (a drone), which is the target for real-time positioning. The precise coordinates of the reference station were acquired by post-processing of received satellite data together with the reference station location data provided by government infrastructure. For the system's implementation, low-cost commercial GPS receivers were used. Furthermore, a Zigbee transmitter/receiver pair was used to wirelessly send control signals and error correction data, making the whole system affordable for personal use. To validate the system, a drone-tracking experiment was conducted. The results show that the average real-time position error is less than 0.8 m.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.150-160
• /
• 2008

The present domestic underwater and ocean facilities management depends on analysis with the naked eye. This study performs quantitative analysis to improve conventional methods, analyze spatial situation of underwater facilities. This research is divided into two steps; underwater image distortion correction and image mosaic step. First, underwater image distortion correction step is for the production of underwater target, calculates the correction parameters, and then developed the method that convert the original image point to whose distortion is corrected. Second step is for the obtaining pipe images installed in the underwater, corrects the distortion, and then transforms a coordinates of the correction pipe image. After coordinate transformation, we make the mosaic image using the singularities. As a result, when we measure the distance between pipe and underwater ground and compare with calculation value on mosaic image, it is showed that RMSE is 0.3cm.