• Therapeutic Science for Rehabilitation
• /
• v.1 no.1
• /
• pp.17-28
• /
• 2012

Objective : The purpose of this study is to assess effects of task oriented programme on balance and upper extremity function in stroke patient. Methods : The subject is right hemiplegia with stroke and participated for 6 weeks. The design of study ABA designed of single subject research. The baseline phase consisted of 5 sessions. The intervention phase consisted of 15 sessions and performed task oriented training. The Maintenance phase consisted of 5 sessions. An assessment of upper extremity function was made using a Manual Function Test(MFT) and balance were assessed by the Time Up and Go test(TUG), Nintendo Wii Balance Board Test. Results : Dynamic balance improved from 51.53 to 42.62. At baseline, difference between left and right of the static balance was an average of 13.8, After treatment, the static balance difference was 6.29 and It was closer to zero than baseline, so static balance has been stable feature. Also, MFT point increased from 6 to 7.6. Conclusion : Task oriented programme can useful in balance and upper extremity function in stroke patient. Further studies need to generalize these findings.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.272-276
• /
• 2007

Purpose : Bell's palsy is defined as an idiopathic facial nerve paralysis of sudden onset. In spite of intensive clinical and experimental investigation, there is still uncertainty in the incidence, etiology, and preferred mode of treatment in children. The objective of this study was to analyze clinical outcome and prognosis of children with Bell' palsy. Methods : We analyzed 61 cases of Bell's palsy diagnosed at the Department of Wonkwang University Hospital from January 1998 to July 2006. The inclusion criteria were any children with acute isolated unilateral lower motor neuron type of facial nerve palsy. The clinical findings and investigations were reviewed including age, sex, affected site, seasonal incidence and result of steroid treatment. Chi-square and Fisher's exact test was used to compare clinical outcome between duration of complete recovery and age. Results : There was no difference in incidence according to sex or age. Incidence was higher in summer and winter. There was no difference in complete recovery rate and duration between steroid treated group and control group. In the group of children younger than 6 years, duration of complete recovery was shorter than older children. Conclusion : We found increasing the incidence of Bell's palsy in summer and winter. Children younger than 6 years had shorter duration in complete recovery.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.3
• /
• pp.271-277
• /
• 2017

The purpose of this study was to develop a balance chair for improving pelvic correction and postural balance through postural balance training using tactile feedback by a vibration motor provided in real time according to the user's attitude. We built a body frame using mono cast(MC) Nylon, Touch thin film transistor(TFT) for user interface, a main control module using Arduino, a 9-axis acceleration sensor for user's posture determination, and a vibration module for tactile feedback. The prototype of the Balance Chair which surrounds the outside was made with cushion for sitting conformability. In order to verify the effectiveness of the postural balance training system using the built prototype, the muscle activity (% MVIC) of the left and right iliocostalis lumborum those are the main muscles of the spinal movement was measured with ten female subjects. And the balance ability before and after training was measured using Spine Balance 3D, a posture balance ability evaluation device. The muscular activities of the left and right iliocostalis lumborum showed the balance activation according to vibration feedback during exercise protocol and postural balance improved after balance exercise training using balance chair. This study could be apply to use the fundamental research for developing the various postural balance product.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.23-32
• /
• 1996

차량에서 엔진은 가장 큰 질량 집중체(concentrated mass)이다. 만약 엔진이 적절하게 구속되지 않거나 절연되어 있지 않으면, 차체에 진동을 일으키는 원인이 된다. 엔진은 다양한 진동 교란을 받는데 엔진 마운트는 이러한 모든 것들을 고립시키는 역할을 해야 하며, 엔진은 정적인 장착 하중에 대한 지지와 전후, 좌우 및 수직 방향의 운동에 대해 적절한 강성을 가져야 한다. 또한 정숙성을 향상시키기 위해서는 엔진 마운트의 재료인 고무의 강성계수를 낮추는 것이 필요한데 이는 일반적으로 내구성의 저하를 가져온다. 따라서 개발과정에서 강성계수를 낮추는 변경을 하면 부품의 내구성을 보정함에 따르는 재평가 또한 필요하게 된다. 엔진 마운트에 쓰이는 고무부품의 해석은 엔진 마운트 시스템에 대한 진동 해석 및 내구수명의 예측과 병행해야 하며, 진동해석으로부터 얻은 하중 지지 능력 등의 모든 요구 특성을 만족하기 위해서는 고무 재료의 특성에 대한 지식, 엔진 마운트의 장착 위치에 대한 결정 능력과 함께 주어진 조건에 대한 형상의 최적 설계 능력 등이 요구된다. 본 연구에서는 기본적인 형상을 파라미터화하여 엔진 마운트의 형상을 최적화 하는 절차를 제안하였다. 현재 승용차에 널리 사용되고 있는 부시형(bush type) 엔진마운트를 적용 모델로 선택하였으며, 엔진 마운트의 기본적인 형상을 몇개의 파라미터를 사용하여 정의하고 설계 사양으로 주어지는 강성값과 각 파라미터들의 조합으로 구성되는 형상이 갖는 강성값의 차이가 최소가 되도록 파라미터 값들을 최적화하였다. 최적화된 파라미터 값들로 구성되는 형상을 내구 성능, 성형성등을 고려하여 최종 형상으로 결정한다. 내구성능의 예측은 금속부품의 내구수명 예측에 널리 이용되고 있는 방법이 방진 고무부품의 경우에도 적용 가능한지를 검토하고, 방진 고무부품에도 일반적으로 적용될수 있는 내구수명 예측방안의 개발 가능성을 타진해 보았다. 본 연구의 목표는 시제품을 제작하기 이전에 설계된 부품에 대한 스프링 상수 및 내구특성을 체계적으로 규명하여 제품 시험의 횟수를 줄이고, 보다 정밀한 제품을 제작할 수 있도록 하기 위한 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.717-724
• /
• 2020

We study the closing characteristics of a self-sustainable poppet valve which serves as a main oxidizer shut-off valve for liquid rocket engines. Numerical analysis for predicting closing transient responses are presented and the calculated results have been verified by a comparison with experimental data. The effective area of a pilot gas discharge system and the pressure distribution of passage flow around the valve moving part are shown to be main parameters in determining the closing characteristics for dry and cryogenic conditions, respectively. Moreover, it is presented that the passage flow pressure at the valve closing moment as well as the valve closing velocity can be effectively adjusted by the appropriate employment of the pilot gas.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1441-1446
• /
• 2012

An axial-piston-type hydraulic motor involves friction and leakage losses at the sliding parts, contact loss at the mechanism assembly parts, volumetric loss caused by the pressure drop, housing oil churning loss and compressibility from the hydraulic oil pipe resistance, etc. the friction and volumetric loss at the hydrostatic bearing between the piston shoe and the swash plate rotating at high speed and having an oil film gap of 8-15 ${\mu}m$ strongly affects the total efficiency of the hydraulic motor. In this study, a variable swash-plate-type hydraulic piston motor operating under a maximum pressure of 35 MPa, maximum speed of 2,500 rpm, and displacement of 320 cc/rev is tested to verify the optimal ratio of the hydrostatic bearing which is closely related to the hydraulic motor performance.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.103-117
• /
• 1996

A mathematical model of vapor explosion propagation is presented. The model predict two-dimensional, transient flow fields and energies of the four fluid phases of melt drop, fragmented debris, liquid coolant and vapor coolant by solving a set of governing equations with the relevant constitutive relations. These relations include melt fragmentation, coolant-phase-change, and heat and momentum exchange models. To allow thermodynamic non-equilibrium between the coolant liquid and vapor, an equation of state for oater is uniquely formulated. A multiphase code, TRACER, has been developed based on this mathematical formulation. A set of base calculations for tin/water explosions show that the model predicts the explosion propagation speed and peak pressure in a reasonable degree although the quantitative agreement relies strongly on the parameters in the constitutive relations. A set of calculations for sensitivity studies on these parameters have identified the important initial conditions and relations. These are melt fragmentation rate, momentum exchange function, heat transfer function and coolant phase change model as well as local vapor fractions and fuel fractions.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.2
• /
• pp.156-160
• /
• 2012

Recently, the demands of the large scale machine tools gradually increase to machine the large parts, such as large scale crankshaft, yaw and pitch bearings for the wind power generator and the vehicle or aircraft components. But the high technology is necessary in order to develop the huge machine tools. Furthermore, the global market of it has been monopolized by a few companies. So, we need to develop the large scale machine tools and study its core technology to rush into the increasing market. In this study, we carried out the researches for the important core technology of a multi-tasking, machine tool; a large scale 5-axis machine tool of gantry type for multi-task machining. This study is focused on the design of large size gantry type multi-axis machine. In the case of large size of machine the cross rail deflection in the X-axis is significant. To reduce the deflection due to the eccentric spindle head, a special hollow type design in the cross rail with outside ram is adapted in this study. Also, the Zig-Zag motion in the Y-axis is inevitable with the gantry geometry, which is by the un-balancing, different motion at the left and the right columns moving. We tried to reduce the influence of Zig-Zag motion using FEM with different loading conditions at the left and the right side column.

• Journal of Veterinary Clinics
• /
• v.32 no.3
• /
• pp.243-246
• /
• 2015

A 9 month-old female Chihuahua (weighing 1.5 kg) was referred with loud left basal murmur and exercise intolerance. Diagnostic imaging studies revealed the elongation of left ventricle (LV) with classic triple bumps on the main pulmonary artery, aorta and left atrium on the dorsoventral view of radiograph. Echocardiography revealed patent ductus arteriosus (PDA) duct and continuous turbulent shunt flow (maximal velocity 5.73 m/s) between the aorta and pulmonary artery with left to right direction. The PDA in this dog was successfully closed though femoral vein (transvenous approach) using an Amplatzer$^{(R)}$ vascular plug. To the best of author's knowledge, this is the first case of PDA occlusion treated with vascular plug through femoral vein.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1366-1370
• /
• 2004

한강은 남한 제1의 하천으로 지리적으로 한반도의 중심부에 위치하여 동에서 서로 흐르는 대하천이다. 매년 발생하는 홍수에 대한 한강하류부의 홍수관리는 대단히 중요하다. 본 연구는 한강의 지천유입량이 한강본류 수위에 미치는 영향을 수리학적 홍수추적 모형을 이용하여 분석하였다. 수리학적 홍수추적 모형은 하천의 지형적 특성과 여러인자들을 반영하여 하천의 흐름을 해석하기 때문에 하천에 설치되어 있는 교량, 수중보, 지천유입량, 조도계수 등을 적절히 반영하였을 때 보다 정확한 결과를 얻을 수 있다. 본 연구에서는 1차원 부정류 흐름으로 해석하였으며 미국 NWS(National Weather Service)에서 기존의 DWOPER 모형과 댐파괴 모형인 DAMBRK 모형을 통합하여 개선한 FLDWAV 모형을 사용하였다. 이 모형의 지배방정식은 연속방정식과 운동량방정식으로 구성되어 확장된 Saint-Venant 방정식이고, 수치기법으로는 가중4점음해법을 이용하려 비선형 연립방정식을 Newton-Raphson 방법으로 해석한다. 모형의 상류경계는 팔당댐 시간 방류량을 하류경계로는 전류수위표 지점의 수위를 이용하였다. 한강하류부에는 많은 지천들이 흘러들어 유입되고 있는데 지천유입량이 한강수위에 미치는 영향을 분석하기 위하여 비교적 유역면적이 큰 왕숙천, 탄천, 중랑천, 안양천 등의 지천유입량을 고려하였다. 2000년과 2001년에 발생한 2개의 실측사상을 FLDWAV 모형을 이용하여 계산된 수위값과 검증해 본 결과 실측수위를 잘 재현하고 있는 것을 알 수 있었다. 검증된 모형을 가지고 동일한 사상에 대해서 지천 유입량을 고려하지 않고 모의를 한 결과 지천유입량을 고려하였을 때와 고려하지 않았을 때의 지천유입량에 대한 수위상승량은 $1\~5cm$ 정도로 나타났다. 지천유입량에 의한 수위상승이 어느정도 일어나고 있지만 홍수기간에 이 정도의 수위상승은 한강의 흐름이나 한강하류부에 설치된 구조물의 침수피해에 크게 영향을 주지않을 것으로 판단되었다. 한강하류부의 수위는 지천유입량의 영향보다는 팔당댐의 방류량에 의해서 좌우되고 있고 홍수시에는 한강의 수위상승으로 인하여 지천에 미치는 배수영향이 훨씬 더 클 것으로 판단된다.