• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.426-434
• /
• 2001

Striping is a scheme that partitions data into blocks and distributes the blocks on different servers in a well defined order and thus could improve system capacity through load balance. In this paper, we propose a parallel VOD server and striping policies for load balancing when extra storage nodes are attached to a parallel VOD server for insufficient disk space in that VOD server. When new video data is stored on the attached storage node, the node may be overloaded. Since it decreases the system bandwidth, appropriate striping policies are required. We therefore present three striping policies that move some block of data o existing nodes into the new node and distribute the new data across all the storage nodes including the new node. Our experiment result shows that FSM bi-direction is the most effective technique.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.75-80
• /
• 2017

The use of optical fiber makes it possible to transfer a large amount of data, thereby enabling a high-speed image transmission with a high response speed and a large number of frames. The need for an optical fiber HDMI System has grown in importance due to the rapid development of displays with large sizes and high-resolution images. In this paper, we have studied the structural design and FEM analysis of a 4C fiber guide for hybrid interconnection implementation. According to the structural analysis of the fiber guide, we have confirmed the safety of the design and we will make additional design changes to minimize the optical loss and fabricate a fiber guide for photoelectric composite HDMI in the future.

• The Korean Journal of Mycology
• /
• v.33 no.1
• /
• pp.18-21
• /
• 2005

Extracts of 67 wild mushrooms were tested for their fibrinolytic activities. The extract of Marasmius pulcherripes showed 112% higher increased activity as compared with a positive control, plasmin (0.75 U/ml). Helvella elastica and Psathyrella sp. showed 60% and 49% of activities to that of plasmin, respectively. Three mushrooms such as Lepista sordida, Fomitella fraxinea, and Leucoagaricus rubrotinctus showed 40% of plasmin activity. The other 60 mushroom extracts did not show any fibrinolytic activity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.881-886
• /
• 2018

Over the last several decades, the advances in computer engineering technology have led a new paradigm of data-intensive research in the field of scientific applications. A collaborative work environment for storing, sharing and analyzing data is required for researchers of geographical distance. The Korean government supports the Research & Education network(KREONET) and the Global Science experimental Data hub Center(GSDC) to strengthen the nation's competitiveness. The KREONET has upgraded its backbone to 100Gbps to accommodate demand to transfer data fast among the global major experimental sites. This paper introduces the test result between high performance nodes reserved for big data transfer.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.328-336
• /
• 2000

This paper presents a multimedia authoring system in which user can create multimedia documents more easily and dynamic presentations can be supported. Our system defines a new time relation based on causal relation, so it controls effectively presentations when durations of media are changed in run-time. It supports dynamic authoring to feedback the consistency that could be occurred when users authorize multimedia documents. In our system, a multimedia document is represented to internal structure using trees through parsing phases, and a presentation engine is provided for processing dynamic presentations and user interactions in run-time.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.255-264
• /
• 2011

TV-Anytime is an XML-based standard for description of PVR and digital broadcast services. It is referenced by many standards of digital broadcast service for their schemas and delivery protocols of contents guide. Although its readability and extensibility, TV-Anytime has a big problem which generates massive documents due to its text-based description method. Therefore, various encoding algorithms have been proposed to reduce the size of XML documents. This paper proposes efficient metadata encapsulation architecture based on the optimization information generated at server-side to minimize XML documents. Advanced indexing method is also proposed to reduce resources needed to encapsulate indices and to receive metadata with fast and explicit mechanism.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.76-81
• /
• 2019

In the mold-manufacturing field, various methods of advanced production technology are being used in the production of industrial-grade gear pulleys. Among the current methods are injection molding, hoop molding, insight molding, two-material molding, compound-mold molding, as well as engineering plastic mold. Currently, casting pulleys are inexpensive because they are produced in small quantities. However, they produce complications during the manufacturing process, are very unreasonable for mass production, and are disadvantageous in cost competitiveness. Pulleys are divided into hundreds of kinds and thousands of kinds, so the production methods vary. As these pulleys are made of a single material by a casting and welding method, they are not manufactured using injection molds consisting of different materials. In this research, pulleys, shafts, and reinforced plastic materials were incorporated using ANSYS software, and a low-cost, lightweight technology was applied for trial production with optimum design and extrusion technology.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2235-2246
• /
• 1997

This paper presents an effective heuristic task scheduling algorithm for multiprocessor systems. To execute task scheduling effectively which is defined as an allocation of m's tasks onto n's processors(m > n), several problems almost at NP-hard should be cleaned up. The purpose of the task scheduling obtains the minimum execution time by mapping the tasks on a system topology or reduces the total execution time to give a minimum system topology. In order to solve this problem, in this paper, the task scheduling is done by redefining a task graph to a reconstructed task graph (RTG). An RTG is obtained by merging or copying nodes to equal the number of nodes on each level of the task graph to the number of processors of the system topology and then directly scheduled to the system topology. This method obtains a fast scheduling time and a simple scheduling method, and near-optimal execution time without executing steps such as the refinement step and the duplication step after the task scheduling.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.596-599
• /
• 2004

The robotic $CO_2$ welding is a manufacturing process to produce high quality joints for metal and it could provide a capability of full automation to enhance productivity. Despite the widespread use in the various manufacturing industries, the full automation of the robotic $CO_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this research, an attempt has been made to develop an intelligent algorithm to predict the weld geometry (top-bead width, top-bead height, back-bead width and back-bead height) as a function of key process parameters in the robotic $CO_2$welding. To achieve this above objective, Taguchi method was employed using five different process parameters (tip gap, gas flow rate, welding speed, arc current, welding voltage) as a guide for optimization of process parameters.