• Korean Journal of Medicinal Crop Science
• /
• v.8 no.4
• /
• pp.362-372
• /
• 2000

This study was conducted to obtain the basic information on the production of high yield and qualitied yam in Andong, major yam-producing district, in Kyongbuk province, using three major Yam cultivars, such as Danma, Jangma and Alata (round type). Alata showed the longest tuber width while Jangma showed the longest tube length. Danma showed the highest tube yield at 2,123 kg/10a. Tubes of Alata had higher dry ratio than those of other cultivars, suggesting that Alata could be used as good processing materials. Characteristics of top parts, such as vine length, leaf number, and lateral vine number showed typical sigmoid curves. Tuber characteristics such as length, width and fresh weight of tuber were linearly increased as the growth period was progressed. Relative growth rate (RGR) for new tuber and stem reached the highest value at 86 DAT (days after transplanting). There were similar tendencies among the cultivars in net assimilation rate (NAR). The highest crop growth rate (CGR) was appeared at 156 DAT regardless of cultivars. In the changes of leaf area ratio (LAR), there were significant differences among three cultivars. LAR were decreased at 86, 106 and 136 DAT for Alata, Danma and Jangma, respectively. However, specific leaf weight (SLW) was greatly increased at 176 DAT, and leaf area index (LAI) was decreased at 156 DAT in all cultivars.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.47-47
• /
• 2022

단자엽식물은 잎의 곡선과 직선의 조화가 아름다워 관상용으로 가치가 높은 식물이다. 이로 인해 자생 단자엽식물의 실내 관상 및 조경용 소재개발 연구가 활성화되고 있으나 재배에 대한 정보는 미비한 실정이다. 본 연구에서는 국내 자생 단자엽식물인 참김의털[Festuca ovina L. var. coreana (St.-Yves) St.-Yves], 청사초(Carex breviculmis R.Br.), 골풀[Juncus decipiens (Buchenau) Nakai]을 대상으로 몇 가지 재배 조건에 대한 생육 차이를 확인하였다. 국립생물자원관으로부터 분양 받은 세 종의 종자는 휴면 여부와 발아 적온을 확인하기 위해 종자를 페트리디쉬에 파종한 후 15, 20, 25, 30℃(명 또는 암조건) 및 25/15℃(16/8h, 명/암) 조건에 배치하였다. 재배실험은 유리온실에서 수행되었으며, 토양에 파종 후 4주간 육묘한 다음 균일한 생육상태의 묘를 7cm 포트에 이식하여 실험의 재료로 사용하였다. 토양실험은 시판 원예용상토와 마사토를 혼합하여 사용하였으며, 비율을 1:1, 2:1 및 3:1로 조성하였다. 차광 환경은 55, 75% 차광과 무차광 조건으로 달리 하였으며, 추비는 재배 6, 8, 10주차에 500, 1,000ppm의 하이포넥스(NPK 7-10-6) 용액을 엽면시비 하였다. 토양실험을 제외한 모든처리구에서는 원예상토 단용을 사용하였으며, 이식 후 12주간 재배하였다. 발아 실험 결과, 참김의털은 명조건에서 25/15와 15℃를 제외하고 발아율이 10% 이하로 조사되었으며, 암조건에서 온도가 증가할수록 발아율이 감소하였다. 청사초는 모든 온도에서 90%이상 발아하였으며, 암조건의 경우 발아율이 10% 이하로 조사되어 광발아성 종자로 확인되었다. 골풀은 실험이 진행된 30일 동안 모든온도에서 발아하지 않았으나, 재배실험을 위해 토양에 파종된 골풀은 파종 약3주 이후 발아가 관찰되었다. 재배실험 결과, 참김의털과 청사초의 경우 2:1로 혼합한 토양에서 엽수와 분얼수, 생체중 등이 가장 높게 조사되어 관상적 가치가 높았으며, 골풀은 3:1의 혼합토양에서 생육이 가장 우수하였다. 차광은 세 종 모두에게서 생육에 부정적인 영향을 미쳤으며, 청사초와 골풀은 500ppm의 하이포넥스를 시비하였을 때 생육이 촉진되었다.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.287-297
• /
• 2013

The optimization of analytical method for the thermal desorption of seven VOCs (volatile organic compounds) by TD-GC/MS (thermal desorption-gas chromatograph-mass spectrometer) with solid phase sorbent tube, and comparative analysis for the determination of VOCs plotted by standard sorbent tubes prepared using both gas phase and liquid phase materials were investigated. The result of paired t-test showed that a liquid phase standard sorbent tube method was in agreement with a gas phase standard sorbent tube method for six species of VOCs including benzene, toluene, ethylbenzene, o-, m-, and p-xylene except for styrene at the significance level (${\alpha}=0.01$), while the 15.6% of difference in response factor between both of gas phase and liquid phase standard plotting for the determination of styrene showed that both methods were significantly different at the significance level. Therefore, the liquid phase standard plotting method was employed to reduce erroneous data for the determination of styrene including BTEX. Under the optimized analytical method by liquid phase standard sorbent tube, recovery was between $100{\pm}5%$ for 7 species of VOCs, reproducibility ranged from 0.3 to 7.7%, and method detection limit (MDL) ranged from $0.01{\mu}g/m^3$ for o-xylene to $0.27{\mu}g/m^3$ for toluene. The optimized standard method was applied to determine VOCs VOCs from indoor air of of dormitory, one bedroom apartment, and a new car.

• Korean Journal of Environment and Ecology
• /
• v.31 no.3
• /
• pp.297-317
• /
• 2017

The research has been conducted in order to classify the vegetation types of natural forest in Mt. Janggunbong, Bonghwa-Gun and establish its following characteristics of stands. Vegetation data were collected by June in 2014 to August in 2016. Based on the 71 quadrates, we carried out an analysis of species-area curve, vegetation types, importance value, species diversity, coincidence method and CCA. As a result of the species-area curve, it was showed the proper investigation, vascular plants consisted a total of 227 taxa; 67 families, 152 genera, 197 species, 3 subspecies, 27 varieties. The forest vegetation was classified into 7 vegetation units, when it comes to a community group, they are classified into the Quercus mongolica community group. As for community, Q. mongolica community group is classified into the Acer pictum subsp. mono community, Pinus koraiensis community and Q. variabilis community. As for group, A. pictum subsp. mono community is classified into Lychnis cognata group and Deutzia glabrata group. The P. koraiensis community is classified into A. komarovii group and P. koraiensis typical group. The Q. variabilis community is classified into Parthenocissus tricuspidata group and Q. variabilis typical group. As for subgroup, P. tricuspidata group is classified into P. tricuspidata typical subgroup and Salix caprea subgroup. As a result of the importance value, Q. mongolica showed highest importance value in tree layer of vegetation units 1, 2, 3, 4 and 5. Betula schmidtii showed highest importance value in tree layer of vegetation unit 6. P. densiflora showed highest importance value in tree layer of vegetation unit 7. In subtree layer, shrub layer and herb layer of vegetation units 6 and 7, Q. mongolica and Q. variabilis showed high importance value. This implying that a vegetation units 6 and 7 is predicted to be composed by Q. mongolica and Q. variabilis. As for species diversity, vegetation units 1, 2 and 3 showed high species diversity(2.130~2.353). It was considered to be due to the topographical characteristics of valley. As a result of coincidence method and CCA, altitude showed high correlation than other environmental factor.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.3
• /
• pp.259-266
• /
• 1993

Background: To evaluate the risk factor of pneumothorax (PNX) which is the most common complication of CT-guided needle aspiration of the lung, we have examined the frequency of PNX according to the presence of obstructive ventilatory impairment determined by pulmonary function tests. Methods: A comparative study of analysis of forecd expiratory volume and folw-volume curves, and determinations of diffusing capacity taken before procedure were made between each 16 cases with PNX and controls with no PNX. Each of the control group was matched for sex, age, height, and size and depth of lesion with the former. Results: 1) In comparison of vital capacity and parameters derived from forced expiratory volume curve between two groups, VC and FVC were not significantly different, whereas $FEV_1$, $FEV_1$/FVC%, and FEF25-75% showed a significant decrease in the PNX gorup. Also, in the PNX group, all the observed values of parameters analyzed from flow-volune curve were siginificantly reduced in the PNX group compared with those in the control group. 2) The diffusing capacity tended to decrease along with varying individual differences in the PNX group. 3) Patients who had obstructive ventilatory impairment according to the results of pulmonary function tests experienced a twofold increase in the frequency of PNX and a sixfold increase in the frequency of chest tube drainage for treatment of PNX compared with those whose results were normal. Conclusion: These findings suggest that the exact evaluation of obstructive lung disease determined by pulmonary function test be considered assessing a pastient's risk for PNX in the patients who will take the CT-guided needle aspiration of the lung.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.159-169
• /
• 2007

Excessive input of organic matters from fish cage farms to the coastal waters has been considered as one of the major factors disturbing their benthic ecosystem. Sediment samples were taken from around the two fish cage zones (A and B) in Tongyeong coast in June and August 2003, to evaluate the ecological impacts of fish cage farming activity on the macrobenthic polychaete communities. Polychaete accounted for $81{\sim}87%$ of the total macrofauna individuals from each of the sampling stations. The number of species, abundance, diversity and dominant species of polychaete were rapidly changed with the distance from the fish cages. Within 10 m from the fish cages, Capitella capitata, which is a bio-indicator for the highly enriched sediments, was a dominant species and the lowest diversity was recorded. In particular, the maximum density (${\sim}18,410\;ind.m^2$) of C. capitata was found at Farm A where fish cages were more densely established within a semi-enclosed bay system. The sampling zone between 10 m and 15 m showed a rapid decrease of C. capitata with a rapid increase of the numbers of species, implying that this zone may be an ecotone point from a highly to a slightly enriched area. In the sampling zone between 15 m and 60 m, a transitional zone, which represents slightly enriched condition before normal one, was observed with additional increase and maintenance of the number of species and density of polychaete. In addition, the potential bio-indicators of organic enrichment, such as Lumbrineris longifolia and Aphelochaeta monilaris were the predominant species in the sampling zone. Multidimensional scaling (MDS) ordination plots and k-dominance curves confirmed the above results on the gradual changes in the macrobenthic polychaete communities. Our findings suggest that the magnitude of impact of fish cage farming activity on polychaete communities is probably governed by a distance from fish cage, density of fish cage and geomorphological characteristics around fish cage farm.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.95-100
• /
• 1983

A soil hardness meter with strain gages was developed in order to measure the hardness of the soil. Soil hardness tests were conducted at the laboratory based on this measuring system. Also, these results were compard with that from the cone penetrometer which is widely used for this purpose. The following conclusions were drawn from the results. 1. Since the correlation coefficient of calibration curve obtained from the soil hardness meter with strain gages was 0.99876 and that of calibration curve obtained from the cone penetrometer with dial gage was 0.97150, the soil hardness meter with strain gages was more recomendable than that with dial gage for this purpose. 2. Standard deviations of soil hardness for sands and soil of paddy field when the soil hardness meter with strain gages was used were 6.794 and 8.271, respectively and that of soil hardness for sands and soil of paddy field when the cone penetrometer with dial gage was used were 7.490 and 9.169, respectively. Thus, the soil hardness meter with strain gages seemed to have lower measuring error than with dial gage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.88-96
• /
• 2017

Purpose: The purpose of this study is to assess the relationship between the time spent designing custom abutments and repeated learning using dental implant computer aided design (CAD) software. Materials and Methods: The design of customized abutments was performed four stages using the 3DS CAD software and the EXO CAD software, and measured repeatedly three times by each stage. Learning effect by repetition was presented with the learning curve, and the significance of the reduction in the total time and the time at each stage spent on designing was evaluated using the Friedman test and the Wilcoxon signed rank test. The difference in the design time between groups was analyzed using the repeated measure two-way ANOVA. Statistical analysis was performed using the SPSS statistics software (P < 0.05). Results: Repeated learning of the customized abutment design displayed a significant difference according to the number of repetition and the stage (P < 0.001). The difference in the time spent designing was found to be significant (P < 0.001), and that between the CAD software programs was also significant (P = 0.006). Conclusion: Repeated learning of CAD software shortened the time spent designing. While less design time on average was spent with the 3DS CAD than with the EXO CAD, the EXO CAD showed better results in terms of learning rate according to learning effect.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.35-41
• /
• 2011

In this study, the interface soaking effect in InAs/GaAs strained-layer superlattice (SLS) on crystalline phase modulation has been analyzed by the x-ray diffraction (XRD) curve. The strain variation induced by As and/or Sb soaking was determined by the separation angle between the substrate peak and the 0th-order superlattice satellite peak in the XRD spectra. Contrated that the As/InAs soaking arises minor GaAs-like interfacial layer, the Sb/GaSb soaking induces InSb-like one. The Fourier-transformed curves of the Pendellosung interference oscillation shows that the optimum soaking times of As/InAs and Sb/GaSb are 2 sec and 12 sec, at which the highest crystallineity has, respectively. An anomalous twin-peak phenomenon that a satellite peak splits into two peaks was observed in the SLS structure co-soaked by As and Sb at InAs${\rightarrow}$GaSb interfaces. We suggest that it may be resulted from coexistence of two kinds crystalline phases of InAsSb and GaAsSb due to intermixing of In${\leftrightarrow}$Ga and Sb${\leftrightarrow}$As.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.125-134
• /
• 2013

This study was demonstrated to estimate the measurement uncertainty of 23 multiple-component amino acids from beef bone extract by high performance liquid chromatography (HPLC). The sources of measurement uncertainty (i.e. sample weight, final volume, standard weight, purity, standard solution, calibration curve, recovery and repeatability) in associated with the analysis of amino acids were evaluated. The estimation of uncertainty obtained on the GUM (Guide to the expression of uncertainty in measurement) and EURACHEM document with mathematical calculation and statistical analysis. The content of total amino acids from beef bone extract was 36.18 g/100 g and the expanded uncertainty by multiplying coverage factor (k, 2.05~2.36) was 3.81 g/100 g at a 95% confidence level. The major contributors to the measurement uncertainty were identified in the order of recovery and repeatability (25.2%), sample pretreatment (24.5%), calibration-curve (24.0%) and weight of the reference material (10.4%). Therefore, more careful experiments are required in these steps to reduce uncertainties of amino acids analysis with a better personal proficiency improvement.