• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.157-163
• /
• 2019

This study determines the difference in prevalence of anemia and hemoglobin concentration between chronic obstructive pulmonary disease (COPD) and control groups in the elderly. Moreover, this study also examines the prevalence of anemia and hemoglobin concentration according to the severity of COPD in the elderly. Medical records of 8150 participants who answered the 7th National Health and Nutritional Survey conducted in 2016 were reviewed, and a total of 694 participants was included in the analysis. Participants were classified into two groups: COPD and control groups. Laboratory studies on hemoglobin, hematocrit, red blood cell concentration and prevalence of anemia were collected. Subgroup analysis was also conducted according to the severity of COPD. No significant differences were determined for the prevalence of anemia and hemoglobin concentration between both groups. Hemoglobin concentration was significantly higher in the COPD group. Although not statistically significant, there was a tendency for decrease in the prevalence of anemia and increase in the hemoglobin concentration as the severity of COPD increased. Our findings present specific data about the prevalence of anemia and hemoglobin concentration in elderly patients with COPD. Hence, we propose that occurrence of anemia in elderly patients with COPD requires further evaluation of the causes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.25-36
• /
• 2014

Multispectral image classification of individual tree species is often difficult because of the spectral similarity among species. In this study, we attempted to analyze the suitability of hyperspectral image to classify coniferous tree species. Several image sets and classification methods were applied and the classification results were compared with the ones from multispectral image. Two airborne hyperspectral images (AISA, CASI) were obtained over the study area in the Gwangneung National Forest. For the comparison, ETM+ multispectral image was simulated using hyperspectral images as to have lower spectral resolution. We also used the transformed hyperspectral data to reduce the data volume for the classification. Three supervised classification schemes (SAM, SVM, MLC) were applied to thirteen image sets. In overall, hyperspectral image provides higher accuracies than multispectral image to discriminate coniferous species. AISA-dual image, which include additional SWIR spectral bands, shows the best result as compared with other hyperspectral images that include only visible and NIR bands. Furthermore, MNF transformed hyperspectral image provided higher classification accuracies than the full-band and other band reduced data. Among three classifiers, MLC showed higher classification accuracy than SAM and SVM classifiers.

• Ecology and Resilient Infrastructure
• /
• v.4 no.3
• /
• pp.149-155
• /
• 2017

Willow plants are representative biomaterials used in river restoration and main target trees in stream managements. In order to understand the changes in the growth of Salix subfragilis and S. chaenomeloides with their stand ages, we investigated the density, height and basal area of stems and biomass at their different aged stands of the riparian zone of the sand-bed stream, the Nakdong River, Korea. We also developed allometric equations for estimating the biomass of these two species by establishing the relationship between diameter at breadth height and tree height with above-ground biomass. The stem density showed a sharp decrease for 3 years after germination for S. subfragilis and 6 years for S. chaenomeloides, resulting in strong self-thinning. The stem height of the two species increased to 7.5 m in 15 years for S. subfragilis, and to 14 m in 13 years for S. chaenomeloides. Aboveground biomass also increased rapidly at the early stage of growth. The biomass increased to 17 ton DM/ha in 13 years for S. subfragilis and to 1,110 ton DM / ha in 13 years for S. chaenomeloides. It is expected that the allometric equations of two Salix species derived from this study will be applied to the objectively estimating the biomass of willow plants for the management of floodplain trees in streams.

• Science of Emotion and Sensibility
• /
• v.22 no.3
• /
• pp.47-54
• /
• 2019

We examined previous studies of the correlation analysis of heart rate variability as a method to reduce the stress caused by outside noise during driving, and we investigated whether there are electrocardiographic changes when drivers play music, which provides a stable sound source amid the noise. Because the number of cars increases every year, drivers and passengers show an increase in stress caused by outside noise. The stress from outside noise while a person is driving can cause several disorders, such as anxiety, immunosuppression, depression, and heart disease. Subjects in this study operated a vehicle simulator to reduce the stress from outside noise and were given different auditory stimuli, and we studied the drivers' responses to the stimuli. Repeated-measures analysis of variance revealed a significant differences between subjects exposed to different auditory stimuli (ρ < 0.05). Through post hoc analyses, we examined these differences. We found significant differences between factor 1 (stability) and factor 2 (simulation driving), between factor 1 (stability) and factor 3 (driving + police siren), and between factor 1 (stability) and factor 4 (driving + police siren + music). In addition, the factor that produced the highest level of sympathetic nervous system activity was factor 4 (driving + police siren + music), followed by factor 3 (driving + police siren), factor 2 (driving), and factor 1 (stability). In conclusion, even when a police siren was heard during driving, there were no significant differences on electrocardiograms (ECGs). In addition, even when the siren was heard over the music, there was no difference on the ECGs (ρ < 0.01). In future studies, investigators should determine which types of music help stabilize the heart rate during driving.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.195-201
• /
• 2017

In this study, H13 tool steel sculptures are built by a metal 3D printing process at various laser scan speeds. The properties of commercial H13 tool steel powders are confirmed for the metal 3D printing process used: powder bed fusion (PBF), which is a selective laser melting (SLM) process. Commercial H13 powder has an excellent flowability of 16.68 s/50 g with a Hausner ratio of 1.25 and a density of $7.68g/cm^3$. The sculptures are built with dimensions of $10{\times}10{\times}10mm^3$ in size using commercial H13 tool steel powder. The density measured by the Archimedes method is $7.64g/cm^3$, similar to the powder density of $7.68g/cm^3$. The hardness is measured by Rockwell hardness equipment 5 times to obtain a mean value of 54.28 HRC. The optimum process conditions in order to build the sculptures are a laser power of 90 W, a layer thickness of $25{\mu}m$, an overlap of 30%, and a laser scan speed of 200 mm/s.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.80-90
• /
• 2011

The purposes of this study are clarifying the characteristics of women's hair style in the late Joseon Dynasty by inquiring into that hair style and, by extension, having a new understanding of the aesthetic consciousness of women in those times. The typical hair style of married Joseon women was Ungeonmeori and Jjokmeori, with Ungeonmeori being much more popular. Regardless of socioeconomic status, women used a big Gache as long as conditions permitted. Meanwhile, some women who led the trend or followed the national policy did Jjokmeori and wore Jokdoori. The Joseon Dynasty had a strict clothing system. However, giseangs were free from this restriction and they were free at attire. Therefore, they led the fashion trend. Both noble and common women followed the trend, imitating giseangs' attire. Women's hair style was used as a tool to express one's personality in the late Joseon Dynasty when the hierarchy was already weakened. In fact, it seems that women in those times cared more about hair style trend than clothing trend. This means that those women already had such a high quality of aesthetic consciousness that they showed their hair which is the closest to the face to advantage.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.111-124
• /
• 2008

The changes in flora and distribution and structure of vegetation were monitored for seven years at a restored reach of an urban stream, the Yangjae Stream, southeast of Seoul, Korea. In the restored reach, diverse kinds of the close-to-nature stream restoration techniques were adapted and implemented in the winter of 1998-1999. The species numbers and diversity indices of riparian plants at the restored reach were higher than those at the unrestored reach seven years after the restoration implementation. But plant diversity was decreased from the early restoration stage of 1999 - 2001 to seven years after the implementation. The dominant species changed from a ruderal annual, Humulus japonicus, to a perennial, Phragmites australis. The floral structure was distinctly different between in the early stage and seven years later on the results of principal component analysis (PCA) because of decreasing in numbers of exotic or ruderal species and planted or introduced plants in newly disturbed habitats. The distribution areas of communities of Humulus japonicus and Erigeron annuus were decreased and those of communities Phragmites australis and Miscanthus sacchariflorus were increased after the restoration implementation. The results of detrended correspondence analysis (DCA) of plant communities revealed that the community structure were changed from the disturbed vegetations to the stable and natural vegetation after the restoration implementation. Total seven species of willows were found at the restored reach, of which two species were planted and the others were naturally introduced. The monitoring results showed that the stream ecosystem of the study reach were successfully recovered in flora and vegetation and could be used as a model site for the stream restoration in urban streams.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1327-1334
• /
• 2014

Linear form of public works such as roads, railways and rivers, generally used as long work crossing administrative districts, can be several hundreds km length and narrow. These linear forms use SCM sheets, which do not include the quadrangle shape, to make a public announcement of topographical drawing in order to get the work approval. the Integrated measurement channel investigation and cadastral act that are established in 2009 apply the ITRF for the composition of design and construction books and coordinates of topographical map in order to get the work approval. However according to the article 5 of additional clause, while the cadastre is maintaining local coordinates, if there is a technical error in the content of the Public Announcement of Topographical Drawing that used the SCM, the question of responsibility of land borders and the efficacy or not of the announcement is raised as an administrative measure. After analysing the causes and enforcing coordinate conversion and correction taking into account linear form work's features, the result was reflected in the existing SCM. As a conclusion, the present study proposes the improvement of the procedures of the Public Announcement of Topographical Drawing.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2016

The reuse of wastewater is being diffused to manage and develop the water resources. Generally, the treated wastewater is discharged to the river after being treated to meet the effluent quality standard or reused for diverse uses through the reprocessing. And recently, as the reuse of the treated wastewater is activated, the technologies to utilize for the high quality water resources such as industrial water by reusing the wastewater with Membrane Distillation (MD) are under development. In this study, the direct contact membrane distillation (DCMD) process has been applied to treat sewage discharge water for water reuse. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$. The influence of operating parameters, such as feed temperature, feed flow rate, feed concentration, on the permeate flux and rejection has been investigated. All filtration tests were conducted till the feed volume reached a concentration factor of 3.0. Thus, the operating period ranged between 19 hr and 49 hr depending on filtration performance. The results showed that above 92% of TN, TP, COD and TOC in the feed could be rejected regardless of an operating condition. The water flux was ranged from 13.8 to 20.3 LMH. The lowest flux was obtained at the operating condition with the feed temperature of $50^{\circ}C$ and feed flow velocity of 500 mL/min while the highest one was measured with $60^{\circ}C$ and 900 mL/min. When the concentration factor reached 3.0, water flux declined by approximately ranged from 14.5% to 33.3%. But the fouling in MD is almost fully reversible, with more than 90% recovery of permeate water flux following a DI water rinse without the addition of chemical cleaning reagents.