• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.31-37
• /
• 2013

Lowering surface reflectance of Si wafers by texturization is one of the most important processes for improving the efficiency of Si solar cells. This paper presents the results on the effect of texturing using acidic solution mixtures containing the catalytic agents to moderate etching rates on the surface morphology of mc-Si wafer as well as on the performance parameters of solar cell. It was found that the treatment of contaminated crystalline silicon wafer with $HNO_3-H_2O_2-H_2O$ solution before the texturing helps the removal of organic contaminants due to its oxidizing properties and thereby allows the formation of nucleation centers for texturing. This treatment combined with the use of a catalytic agent such as phosphoric acid improved the effects of the texturing effects. This reduced the reflectance of the surface, thereby increased the short circuit current and the conversion efficiency of the solar cell. Employing this technique, we were able to fabricate mc-Si solar cell of 16.4% conversion efficiency with anti-reflective (AR) coating of silicon nitride film using plasma-enhanced chemical vapor deposition (PECVD) and Si wafers can be texturized in a short time.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.75-83
• /
• 2008

This studies were designed to elucidate whether inhibitors of topoisomerase regulate function and activity of topoisomerase, and gene expression in HL-60 human leukemia cells. HL-60 cells were treated with 10-hydroxycamptothecin or doxorubicin, total RNA was isolated, and expressed genes were investigated with human oligonucleotide microarray containing 10K gene, respectively. Expression profiles of the human leukemia HL-60 cells treated with 10-hydroxycamptothecin (10-CIT) or doxorubicin associated with signal transduction,. cell adhesion, cell cycle, cell growth, cell proliferation, cell differentiation, transcription and immune response, especially genes related with transcription and cell growth. In HL-60 cells treated with 10-CPT, the expression of topoisomerase III${\alpha}$, III${\beta}$ and I gene from oligo chip microarray analysis were increased over, but the expression of topoisomerase II${\alpha}$ and II${\beta}$ gene were decreased over. In contrast, the expression of topoisomerase II${\alpha}$ and II${\beta}$ gene were increased over in HL-60 cells treated with doxorubicin, whereas the expression of topoisomerase III${\alpha}$ and III${\beta}$ mRNA remained no significant change. These results suggest that these data may be useful for novel therapeutic markers.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.238-244
• /
• 2011

Biodiesel, mono-alkyl esters of long chain fatty acids, is one of the alternative fuels derived from renewable lipid feedstock, such as vegetable oils or animal fats. For decade, various lipases have been used for the production of biodiesel. However, the production of biodiesel by enzymatic catalyst has profound restriction in industry application due to high cost. To overcome these problems, many research groups have studied extensively on the selection of cheap oil sources, the screening of suitable lipases, and development of lipase immobilization methods. In this study, we produced biodiesel from plant oil using Proteus vulgaris lipase K80 expressed in Escherichia coli cells. The recombinant lipase K80 was not only expressed in high level but also had high specific lipase activity and high stability in various organic solvents. Lipase K80 could produce biodiesel from olive oil by 3-stepwise methanol feeding method. The immobilized lipase K80 also produced biodiesel using the same 3-stepwise method. The immobilized lipase could produce biodiesel efficiently from various plant oils and waste oils.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.428-433
• /
• 2010

Enzymatic hydrolysis of sulfate groups in agaropectin or agar simplifies the production process of high-quality or low sulfate-content agarose. This study was investigated that cell surface displayed arylsulfatase can be applied to desulfatation of agar for production of agarose. Sulfate content of agarose prepared by treatment of yeast surface-displayed arylsulfatase was decreased in a enzyme dosedependent manner. Especially, 35 unit/mL of yeast surface arylsulfatase attenuated sulfate content of agarose up to 0.2%. In the 0.6% agar(Junsei), 35 unit/mL enzyme treated at $40^{\circ}C$ for 3 h showed the lowest content of sulfate. Therefore, this result was determined to be the optimal condition to desulfatation of agar for production of agarose. In addition, the gel strength of yeast surface arylsulfatase treated agar and commercial agarose were compared. Agarose prepared by treatment of yeast surface arylsulfatase showed $559.8{\pm}0.12$ of gel strength, and it is a similar compared to the commercial agarose.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.15-21
• /
• 2005

Korean ginseng(Panax ginseng C.A. Meyer) is very difficult to obtain stable production of qualified ginseng roots because of variable stresses in soil environments. In transformation of ginseng with betain aldehyde dehydrogenase gene, compounds synthesized for controlling osmotic pressure such as proline, glycine, betaine, polyols and sugar were accumulated in cell for salt resistance in transgenic plants. 2 Agrobactgerium conjugants were acquired with bet A and bet B genes for solt resistant plants. A. tumefaciens MP90/pBetA and A. tumefaciens MP90/pBetB were recombined for increasing the tolerance to salt stress. To confirm the transformation of the binary vector, tobacco plant was transformed, and the transformant can grow on media containing high concentration of kanamycin. To identify NPT 11, BetA and BetB genes of the transformants, the band on the agarose was confirmed by PCR and RT-PCR techniques. The transformants of ginseng with bet A and bet B genes were acquired on the phytohormone free basic MS media containing only antibiotics and 1M mannitol used for selection of transgenic plant, but the transfomation efficiency for BetA and BetB was very low.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.188-199
• /
• 2001

A gene encoding the dextransucrase(dsCB) that synthesizes mostly $\alpha-(1\rightarrow6)$ linked dextran with low amount(10%) of $\alpha-(1\rightarrow3)$ branching was cloned and sequenced from Leuconostoc mesenteroides B-742CB. The 6.1 kbp DNA fragment carrying dsCB showed one open reading frame(ORF) composed of 4,536bp. The deduced amino acid sequence shows that it begins from the start codon(ATG) at position 698 of the cloned DNA fragment and extends to the termination condon(TAA) at position 5,223. The enzyme is consisted of 1,508 amino acids and has an calculated molecular mass of 168.6kDa. This calculated Mw was in good agreement with an activity band of 170kDa on non-denaturing SDS-PAGE. A recombinant E. coli DH5 $alpha$ harboring pDSCB produced extracellular dextransucrase in 2% sucrose medium, and synthesized both soluble and insoluble dextran. To compare the properties of enzyme with B-742CB dextransucrase, the acceptor reaction, hydrolysis of dextran and methylation were performed. The expressed enzyme showed the same properties as B-742CB dextransucrease, but its ability to synthesize $\alpha-(1\rightarrow3)$ branching was lower than that of B-742CB dextransucrase. In order to identify the critical amino acid residues known as conserved regions related to catalytic activity, Asp-492 was replaced with Asn. D492N resulted in a 1.6 fold decrease in specific activity.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2006

We polymerized material of AA(Acrylic acid) and BMA(butyl methacrylate) to make up for the weak points of hydrogel contact lens. The synthesis process of silicone synthesis is as follows. Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer was composed after Diisocynate reacted with HEMA(2-hydroxyethylmethacrylate) under the catalyst and it reacted again with bis(hydroxyalkyl) terminated poly(dimethylsiloxane) with high oxygen transmissibility characteristics. HEMA(2-hydroxyethylmethacrylate) was used to make prepolymer that can be polymerized and the urethane was used to improve elasticity and oxygen transmissibility, copolymerization was performed with conventional hydrogel contact lens materials to make silicone hydrogel contact lens with higher oxygen transmissibility. For manufacturing of contact lens, We added BMA(Butyl methacrylate) with better elasticity and flexibility, and AA(Acrylic acid) with higher moisturizing to used contact lens materials. AIBN (Azobis2-methylpropionitrile) as initiator and EGDMA(Ethylene Glycol Dimethacrylat) as crosslinking agent were used and the lens with higher oxygen transmissibility and better moisturizing were manufactured complying with basic contact lens properties, which have several combination trial of each monomer characteristics. Compounding SN which included SILICONE, HEMA, NVP and EGDMA etc was showed by swelling ratio of 9.38% and water content of 23.7%. SN was showed by swelling ratio of 9.38%, water content of 23.7% and a visible ray transmissibility of 89%. SB which added BMA in the SN was showed by swelling ratio of 12.50%, water content of 18.56% and a visible ray transmissibility of 88%. SAB which added both AA and BMA in the SN was showed by swelling ratio of 8.33%, water content of 12.93% and a visible ray transmissibility of 88%.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.25-33
• /
• 2002

One of the critical problems to preserve books and documents in libraries and archives is the deterioration. Some of previous results showed that the major cause of paper deterioration was the acid-catalyzed hydrolysis of the cellulose in paper fibres and aging rate of acidic paper was faster than that of alkaline paper. Therefore, It is necessary to remove the acid in the paper for reducing the rate of paper deterioration. It has been reported to extend the useful life of acidic paper by three to five times. Recently, It has been recognized the need for an effective method of deacidifying large quantities of books and document. However, in the previous many reports little attention was paid to the effect of paper additives. In this paper, We carried out experiment about the effect of additives on paper aging and the effect of deacidification by the gaseous ethanolamines (monoehtanolamine, diethanolamine, triehtanolamine). In result, it was found that the strength of aging was in the order of the alum＋rosin＞alum ＞AKD＞ control and the rate of deacidification was in the order of the monoethanolamine＞diethanolamine＞triethanolamine. The treatment with the gaseous ethanolamines caused decreasing of brightness and dropping of fold endurances. However, deacidification by combination treatment of the various gaseous ehtnaolamines prevented from decreasing of brightness and dropping of folding endurances.