• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1073-1080
• /
• 2009

A number of studies have demonstrated that the regular use of nonsteroidal anti-inflammatory drugs (NSAIDs) can reduce the risks of colorectal, oesophageal and lung cancers. NSAIDs have been shown to exert their anti-cancer effects through inducing apoptosis in cancer cells. The susceptibility of tumor cells to anti-tumor drug-induced apoptosis appears to depend on the balance between pro-apoptotic and anti-apoptotic programs such as nuclear factor kB (NF-kB), phosphatidylinositol 3-kinase (PI3K)-Akt/protein kinase B (PKB) and MEK1/2-ERK1/2 pathways. We examined the effects of pro-survival PI3K and ERK1/2 signal pathways on cell cycle arrest and apoptosis in response to NSAIDs including sulindac sulfide and NS398. We show that simultaneous inhibition of the Akt/PKB and ERK1/2 signal cascades could synergistically enhance the potential pro-apoptotic activities of sulindac sulfide and NS398. Similar enhancement was observed in cells treated with sulindac sulfide or NS398 and 100 ${\mu}$M genistein, an inhibitor of receptor tyrosine kinases (RTKs) that are upstream of PI3K and MEK1/2 signaling. We further demonstrate that NAG-1 is induced and plays a critical role(s) in apoptosis by NSAIDs-based combined treatment. In sum, our results show that combinatorialtreatment of sulindac sulfide or NS398 and genistein results in a highlysynergistic induction of apoptotic cell death to increase the chemopreventive effects of the NSAIDs, sulindac sulfide and NS398.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.425-426
• /
• 2013

IIIN계 물질 기반의 광 반도체는 직접 천이형 넓은 밴드갭 구조를 갖고 있기 때문에 적외선부터 가시광선 및 자외선까지를 포함한 폭 넓은 발광파장 조절이 가능하여 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있다. 일반적인 청색 및 녹색 발광영역의 활성층으로는 InGaN/GaN 다중양자우물구조를 사용하고 있으나, 장파장의 녹색 발광을 얻기 위해서는 인듐의 함유량이 증가하여야 한다. 하지만, 인듐의 함유량이 증가함에 따라서 InGaN/GaN 다중양자우물 구조내에서 인듐의 편석현상의 발생이 용이하게 되어 계면 특성을 저하할 뿐 아니라, 비발광 센터를 증가하여 발광 효율을 급격히 감소시키는 원인이 되고 있다. 또한, InGaN과 GaN의 큰 성장온도의 차이에 따라 800도 부근의 저온 영역에서 성장된 InGaN층이 1,000도 이상의 고온 영역에서 GaN층이 성장시 InGaN층의 열화 현상이 급격히 발생되고 있다. 이를 억제하기 위해서 금속유기화학증착법의 성장 변수 최적화, 응력제어, 도핑 등의 편석 억제기술 및 보호층이 사용되고 있다. 본 연구에서는 인듐함유량이 증가된 녹색 InGaN/GaN 다중양자우물구조에서 InGaN 우물층 상하부에 도입된 GaN 보호층에 따라 발생되는 양자우물구조의 광학 및 결정학적 특성 분석을 통해 GaN 보호층의 역할을 분석하고자 한다. 본 연구에서는 금속유기화학증착장치를 이용하여 사파이어 기판위에 GaN 템플릿을 성장하고, n-형 GaN, InGaN/GaN 다중양자우물구조 및 p-형 층을 성장하였다. 앞선 언급하였듯이, InGaN/GaN 다중양자우물구조내에 GaN 보호층의 역할을 규명하기 위하여 샘플 A의 경우는 보호층이 전혀 없는 구조이고, 샘플 B의 경우는 InGaN 우물층의 상단부에만, 샘플 C의 경우에는 우물층 상부 및 하단부 모두에 약 2.0 nm 두께의 GaN 보호층을 형성하였다. 이 보호층의 유무에 따른 다중양자우물구조의 계면 특성을 확인하기 위한 X-선 회절을 이용하였고, 광학적 특성을 확인하고 상온 포토루미네선스법을 이용하여 녹색 발광 파장의 변화 및 발광세기를 관찰하였다. 우선적으로, 상온 포토루미네선스법을 이용하여 각 샘플의 발광특성을 확인한 바 상하부 모두에 GaN 보호층이 존재하는 샘플 C의 경우 약 510 nm 부근에서 발광이 관찰되었지만, 상단부에 GaN 보호층이 존재하는 샘플 B는 약 495 nm영역에 발광이 확인되었다. 특히, 전혀 보호층이 존재하지 않는 샘플 A의 경우 약 440 nm에서 발광하는 현상을 관찰하였다. 이는 우물층 상단부 및 하단부에 존재하는 GaN 보호층이 In의 확산을 억제하는 것으로 판단된다. 또한, 발광파장 및 세기를 확인한 바, 보호층의 존재하지 않을수록 단파장화가 발생함에도 불구하고 발광세기는 급격히 약해지는 것으로 보아 계면특성이 저하되어 비발광센터가 증가되는 것으로 판단된다. 이를 구조적으로 확인하기 위하여 X-선 회절법을 통한 ${\omega}$/$2{\Theta}$ 스캔의 결과는 In의 0차 피크가 GaN 보호층이 없을 경우 GaN의 피크 방향으로 이동하는 것으로 보아 GaN 보호층은 우물층 성장 후 GaN 장벽층을 성장하기 위해 온도를 증가시키는 과정에서 In의 확산되는 것으로 판단된다. 또한, 하부 GaN 보호층의 경우 GaN 장벽층 성장 후 온도를 감소시키는 과정에서 성장되므로, 우물층으로부터 In의 탈착현상이 아닌 장벽층과의 상호 확산으로 판단된다. 또한, 계면특성을 확인하기 위해 InGaN의 X-선 위성 피크를 확인한 바 샘플 A의 경우 매우 넓고 약한 피크가 관찰된 반면, 보호층이 존재하는 샘플 B와 C의 경우 강하고 얇은 피크가 확인되었다. 이는 GaN 보호층의 도입으로 인해 계면특성이 향상되는 것으로 판단된다. 따라서, 우리는 InGaN/GaN 다중양자우물구조에서 GaN 보호층은 상부의 열화 억제 뿐아니라, 하부의 장벽층 및 우물층 사이의 상호확산을 억제하는 GaN 보호층의 도입을 통하여 우수한 계면 특성 및 비발광센터의 억제를 얻을 수 있을 것으로 생각되며, 이는 향후 GaN계 발광다이오드의 전계 발광특성을 증가하여 우수한 발광소자를 개발할 수 있을 것으로 기대된다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.123-134
• /
• 2014

Identification of methods to optimize the growth of a plant community, including the capacity of the soil to further sequester carbon, is important in urban design and planning. In this study, to construct and manage an urban park to mitigate carbon emissions, soil organic carbon of varying biomass, different park construction times, and a range of vegetation types were analyzed by measuring aboveground and belowground carbon in Seoseoul Lake Park and Yangjae Citizen's Forest. The urban parks were constructed during different periods; Seoseoul Lake Park was constructed in 2009, whereas Yangjae Citizen's Forest was constructed in 1986. To identify the differences in soil organic carbon in various plant communities and soil types, above and belowground carbon were measured based on biomass, as well as the physical and chemical features of the soil. Allometric equations were used to measure biomass. Soil total organic carbon (TOC) and chemical properties such as pH, cation exchange capacity (CEC), total nitrogen (TN), and soil microbes were analyzed. The analysis results show that the biomass of the Yangjae Citizen's Forest was higher than that of the Seoseoul Lake Park, indicating that older park has higher biomass. On the other hand, TOC was lower in the Yangjae Citizen's Forest than in the Seoseoul Lake Park; air pollution and acid rain probably changed the acidity of the soil in the Yangjae Citizen's Forest. Furthermore, TOC was higher in mono-layered plantation area compared to that in multi-layered plantation area. Improving the soil texture would, in the long term, result in better vegetation growth. To improve the soil texture of an urban park, park management, including pH control by using lime fertilization, soil compaction control, and leaving litter for soil nutrition is necessary.

• Journal of Nutrition and Health
• /
• v.50 no.1
• /
• pp.32-40
• /
• 2017

Purpose: Obesogenic environments in children, in particular excessive intake of sodium, generate hypertension, which is a major risk factor for chronic diseases. Methods: In all, 725 children, 379 boys and 373 girls, aged 8~9 years were recruited from seven elementary schools in Kuro-ku, Seoul. To evaluate whether or not obesity risk was modulated by salt-sensitive genes, Solute Carrier Familiy 12 member 3 (SLC12A3) was used as the target. After children were assigned into obese (BMI > 85 percentile) or non-obese groups, anthropometry, blood biochemistry, and dietary intakes were measured according to the genotypes GG (wild) or GA+AA (hetero+mutant). Results: Without gender differences, high TG and low HDLc were detected in the obese group compared to the non-obese group. Regardless of obesity, weight gain and blood pressure (BP) increased in the SLC12A3 GA+AA genotype rather than in the GG type. HDLc was associated with obesity risk without genotype difference. Odd ratios for risk of obesity were 15.57 (95% CI 2.192~110.654), 22.84 (95% CI 1.565~333.469), and 9.32 (95%CI 1.262~68.817) in boys and girls with GA+AA genotypes as sodium intake increased above 4,000 mg/day. Dietary calcium, sodium, folate, and vit C were associated with obesity risk according to gender or genotype differences. Since high folate intake reduced obesity risk in only boys with GG type. Risk for overweight and obesity increased in boys with GA+AA genotypes and dietary habits with high sodium and cholesterol and low folate. Conclusion: The A allele of SLC12A3 rs11643718 was sensitive to development of obesity in children as sodium intake increased.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.492-500
• /
• 2017

The purpose of this study was to investigate the seasonal distribution of phytoplankton as prey for oysters and to characterize the environmental factors controlling their abundance from June 2016 to May 2017, in the northeast coast between Tongyeong and Saryang Island, particularly for the oyster farming area. During the survey period, water temperature changed from $7.54^{\circ}C$ in February to $29.5^{\circ}C$ in August. The abnormal high temperature persisted during one month in August. Salinity was low due to summer rainfall and typhoon. The lowest level was 30.68 psu in September, and it peaked at 34.24 psu in May. The dissolved oxygen (DO) concentration ranged from $6.0-9.45mg\;L^{-1}$, and the DO concentration in the surface layer was like that in the bottom layers. The seasonal trends of pH were also like those of DO. The pH ranged from 7.91 to 8.50. Nitrate with nitrite, phosphate, and silicate concentrations ranged from $0.14{\mu}M$ to $7.66{\mu}M$, from $0.01{\mu}M$ to $4.16{\mu}M$, and from $0.27{\mu}M$ to $20.33{\mu}M$, respectively. The concentration of chlorophyll a (Chl. a) ranged from $0.37{\mu}g\;L^{-1}$ to $2.44{\mu}g\;L^{-1}$ in the surface layer. The annual average concentration was $1.26{\mu}g\;L^{-1}$. The annual mean phytoplankton community comprised Bacillariophyta (69%), Dinophyta (17%), and Cryptophyta (10%), respectively. Dinoflagellate Prorocentrum donghaiense in June was the most dominant at 90%. In the summer, diatom Chaetoceros decipiens, Rhizosolenia setigera and Pseudo-nitzschia delicatissima were dominant. These species shifted to diatom Chaetoceros spp. and Crytophyta species in autumn. In the winter, high densities of Skeletonema spp. and Eucampia zodiacus were maintained. Therefore, the researchers thought that the annual mean Chl. a concentration was relatively lower to sustain oyster feeding, implying that the prey organism (i.e., phytoplankton) was greatly controlled by continuous filter feeding behavior of oyster in the vicinity area of the oyster culture farm.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.742-757
• /
• 2001

Since database management systems(DBMSS) have limited lock resources, transactions requesting locks beyond the limit mutt be aborted. In the worst carte, if such transactions are aborted repeatedly, the DBMS can become paralyzed, i.e., transaction execute but cannot commit. Lock escalation is considered a solution to this problem. However, existing lock escalation methods do not provide a complete solution. In this paper, we prognose a new lock escalation method, adaptive lock escalation, that selves most of the problems. First, we propose a general model for lock escalation and present the concept of the unescalatable look, which is the major cause making the transactions to abort. Second, we propose the notions of semi lock escalation, lock blocking, and selective relief as the mechanisms to control the number of unescalatable locks. We then propose the adaptive lock escalation method using these notions. Adaptive lock escalation reduces needless aborts and guarantees that the DBMS is not paralyzed under excessive lock requests. It also allows graceful degradation of performance under those circumstances. Third, through extensive simulation, we show that adaptive lock escalation outperforms existing lock escalation methods. The results show that, compared to the existing methods, adaptive lock escalation reduces the number of aborts and the average response time, and increases the throughput to a great extent. Especially, it is shown that the number of concurrent transactions can be increased more than 16 ~256 fold. The contribution of this paper is significant in that it has formally analysed the role of lock escalation in lock resource management and identified the detailed underlying mechanisms. Existing lock escalation methods rely on users or system administrator to handle the problems of excessive lock requests. In contrast, adaptive lock escalation releases the users of this responsibility by providing graceful degradation and preventing system paralysis through automatic control of unescalatable locks Thus adaptive lock escalation can contribute to developing self-tuning: DBMSS that draw a lot of attention these days.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.143-152
• /
• 2019

This paper presents two new techniques for solving the two problems of the water curtain: 'shape distortion' caused by gravity and 'resolution degradation' caused by fine satellite droplets around the shape. In the first method, when the user converts a three-dimensional model to a vertical sequence of slices, the slices are evenly spaced. The method is to adjust the time points at which the equi-distance slices are created by the nozzle array. In this method, even if the velocity of a water drop increases with time by gravity, the water drop slices maintain the equal interval at the moment of forming the whole shape, thereby preventing distortion. The second method is called the minimum time interval technique. The minimum time interval is the time between the open command of a nozzle and the next open command of the nozzle, so that consecutive water drops are clearly created without satellite drops. When the user converts a three-dimensional model to a sequence of slices, the slices are defined as close as possible, not evenly spaced, considering the minimum time interval of consecutive drops. The slices are arranged in short intervals in the top area of the shape, and the slices are arranged in long intervals in the bottom area of the shape. The minimum time interval is pre-determined by an experiment, and consists of the time from the open command of the nozzle to the time at which the nozzle is fully open, and the time in which the fully open state is maintained, and the time from the close command to the time at which the nozzle is fully closed. The second method produces water drop sculptures with higher resolution than does the first method.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.346-361
• /
• 2021

The range of D. spathulata identified in this survey was between N 35° 24' 58" ~ N 35° 26' 35", E 129° 05' 43" ~ E 129° 07' 04". It is located at an altitude of 98~592 m. The soil pH was strongly acidic in the range of 4.2~4.9, with a canopy openness of 18.56% and a chlorophyll index of 36.74 ± 2.80. As a result of the TWINSPAN analysis, 20 plots of 100 m² each were divided in 4 communities: Pinus densiflora community, Quercus monglica-Diabelia spathulata community, Quercus serrata-Diabelia spathulata community and Carpinus tschonoskii subassociation. The result of species diversity was 0.7615, and evenness and dominance were found to be 0.6077 and 0.3923, respectively. The height of D. spathulata is up to 3.4 m, and the average height is 1.1 m, with most of the species distributed as shrubbery and herbaceous. The average population density of the 20 plots was 1.635 individuals/m², the height range of flowering was 1.0 ~ 1.8 (aver. 1.39 m) and the rate of flowering was 27.37%. It's propagation pattern was mainly formed by extending the rhizome to the side, creating a colony of ground stems.

• Journal of the Daesoon Academy of Sciences
• /
• v.28
• /
• pp.103-131
• /
• 2017

As the establishment of self-identity is based on 'Relationships of Mutual Beneficence,' the formation of 'Relationships of Mutual Beneficence' is the only road to the security and confirmation of self-existence. But given that our ordinary life almost entirely consists of actions objectifying others, the formation of 'Relationships of Mutual Beneficence' is by no means easy. The formation of 'Relationships of Mutual Beneficence' should be based on morality, controlling self-desire, and not objectifying others. Philosophy based on a priori reasoning describes self-control over selfdesire as the domination of the body through a priori reasoning. But this practical philosophy cannot present a self-evidential internal motivation behind moral actions. Due to this, the application of moral order given by a priori reasoning in response to reality is likely to be reinterpreted on basis of self-interest. With regards to this, the 'propensity towards sympathy' is given as new moral norm. The 'propensity towards sympathy' as emotion is direct and consistent given that feeling occurs prior to thinking. The 'propensity towards sympathy' is intuitive in the sense that it is an instinctual response preceeding a reasoned judgment. The 'propensity towards sympathy,' as a natural moral emotion, is self-validating given that all human beings know it and practice it. But previous studies on the 'propensity towards sympathy' have an obvious limitation because they adopt phenomenological approaches to the 'propensity towards sympathy' which eschew the investigation of morality. Though they present the 'propensity towards sympathy' as a natural emotion based on body rather than reason, they do not philosophically explain the 'propensity towards sympathy.' Thus the 'propensity towards sympathy' as a natural moral emotion is likely to be interpreted as a subjective and relative moral norm. This paper philosophically explains that the 'propensity towards sympathy' is a universal moral norm on the basis of Merleau-Ponty's 'flesh.' 'Flesh' is formed as the entanglement between oneself and others and presents the 'propensity towards sympathy' as its philosophical basis. In other words, 'flesh' formed as the mixture or entanglement between oneself and others is the material foundation upon which one can activate the 'propensity towards sympathy.' This paper's approach to the 'propensity of sympathy' can be desribed as a phenomenological approach to the 'propensity towards sympathy' as a universal moral norm.

• Clean Technology
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2023

Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.