• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.84-92
• /
• 2002

A size of low-voltage conductor cables is determined by the voltage drop of a system the cable impedance and the cable ampacity based on temperature correction factor in accordance with the condition of cable installation. Therefore, the proper temperation correction factor according to the condition of cable installation should be applied to determining the cable ampacity and also the skin effect and proximity effect, along with the kind and size of conductor and the condition of cable installation, should be properly considered to analyze the proper value of resistance and the reactance of the conductors. This paper addresses the systematic design flow for determining the size of low voltage level con여ctor cables in calculating the voltage drop of a power system and proposes a new improved the calculating formula what error should be minimized in comparison with the general formula and which can be applied in design work for determining the size of conductor cables.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1721-1723
• /
• 2004

우리는 황토 조명등을 제작하여 원 적외선 발생 실험을 하였다. 실험에는 백열전구 200W, 실내온도 21도, 습도 38%의 조건에서 열화상실험과 TF-IR(적외선 분광방사 측정장치)에 의한 원적외선 방사한도를 측정하였으며, 그 결과 방사율 0.914와 방사에너지 $6.23{\times}10^2\;(w/m^2{\cdot}{\mu}m)$ 가 얻어졌다. 이와 같은 결과로 황토조명등에서 원적외선이 발생한 것을 확인하였다.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.3
• /
• pp.33-43
• /
• 2006

Daylight dimming control system was analyzed for an indirect lighting system in a small office space with a double skin envelope system. Computer simulations were performed for photosensors with three shielding conditions. The photosensors were placed on the center of ceiling, and backwall. Three sky conditions defined by CIE were considered. Overall, control performance was not very excellent for all conditions. Fully-shielded photosensor achieved good control performance for some cases, but partially-shielded and unshielded photosensors failed to achieve target illuminance. The variation in desktop illuminance due to daylight was examined for a variety of daylight conditions. Linear correlation between desktop illuminance and photosensor illuminance was analyzed using ANOVA.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.62-66
• /
• 2009

Three inputs of given three magnetic fluxes of an induction motor are calculated. Then, the calculation of magnetic flux for minimum input is repeated using quadratic interpolation method until the convergence criteria are satisfied. The maximum efficiency control is fulfilled with the final magnetic flux for minimum input. Simulation results verify the effectiveness of the proposed method.

• Broadcasting and Media Magazine
• /
• v.25 no.1
• /
• pp.20-27
• /
• 2020

최근 모바일 기기를 위한 카메라 관련 기술이 발전하면서 취득할 수 있는 영상의 화질 또한 크게 향상되고 있다. 그러나, 일상 생활에서 빈번히 발생하는 다양한 실내외 불규칙한 조명 조건 및 저조도 환경은 여전히 영상 화질 저하를 야기한다. 본 고에서는 이러한 문제를 해결하기 위해 최근 널리 연구되고 있는 심층신경망 기반 영상 화질 개선 연구의 최신 동향을 소개하고자 한다. 먼저, 다양한 최적화 기법을 바탕으로 영상 내 조명 성분을 추정하고, 이를 개선하는 방법들에 대해 간략히 설명한다. 또한, 영상 인식, 객체 검출 등에서 뛰어난 성능을 입증한 합성곱 신경망 구조를 기반으로 영상의 잠재적 특징을 효과적으로 검출한 후 이를 바탕으로 개선된 영상을 생성하는 방법에 대해 설명한다. 다양한 데이터셋에 대한 실험 결과를 통해 인공지능 기반 영상 화질 개선의 우수성을 보인다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.146-153
• /
• 2004

This paper presents the method for the placement and operation of dispersed generator systems(DGs) using fuzzy goal programming in distribution systems. For the placement and operation of DGs the problem is formulated with reduction of search spaces and flexibility of system situations. Especially, the original objective function and constraints are transformed by fuzzy goal programming to evaluate their imprecise nature for the criterion of power loss minimization, the number or total capacity of DGs and the bus voltage deviation, and then solve the problem using genetic algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.39-43
• /
• 2010

This paper presents an LMI-based method to design an adaptive sliding mode controller for a class of uncertain systems. In terms of LMIs an existence condition of a sliding surface is derived. And an adaptive switching feedback control law to guarantee the asymptotic stability as well as to estimate the norm bound of disturbances is proposed. Finally, a numerical design example for controlling a overhead crane model is given to show the effectiveness of the proposed method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.323-326
• /
• 2009

본 연구에서는 대기압 플라즈마의 처리 조건에 따른 ITO 필름의 접착력 향상을 위한 접촉각 및 표면에너지의 변화를 관찰하였다. 대기압 플라즈마의 처리 변수로는 반응 가스, 처리 속도 방전 전압 및 시료와 플라즈마 헤드 사이의 방전 캡이며, 측정된 접촉각을 이용하여 ITO 필름의 표면을 분석하였다. 그 결과는 방전 전압이 증가할수록 접촉각은 낮아졌으며, 시료와 플라즈마 헤드 사이의 방전 간격은 2.5[mm]에서 접촉각이 낮게 나타나 ITO 필름의 접착력 향상을 위한 친수성 물질로 표면 개질됨을 확인할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.153-158
• /
• 2008

When we design the control system used Programmable Logic Controller(PLC), we program the main algorithm by Ladder Diagram(LD) in many standard language. But if we use an Sequential Function Chart(SFC), we is easy to know the sequential flow of control, to maintenance the controller and to describe a program. Even though a SFC have many merits, A SFC have some problems like a condition and a function of self test. Therefore this thesis show an efficient function of self test and we confirmed its feasibility through actual example.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.60-65
• /
• 2003

In this paper, we analyzed theoretically design requirement of a clamp-type optical current transformer(COCT)head, and manufactured a COCT head based on design requirement. Also, we measured and analyzed the current of conductor, and change of optical power and sensitivity with incidence angle of light using COCT head, and demonstrated the feasibility of manufactured COCT through those experiments.