• Proceedings of the KSEG Conference
• /
• 2002.04a
• /
• pp.183-191
• /
• 2002

울산단층대 동변인 경북 경주시 마동 탑골 부근에 발달하는 제4기단층을 기재한다. 이 단층(이후 탑골단층)은 제3기초의 화강암과 제4기의 하성 사력층의 경계부 부근에서 여러 조의 단층들이 단층대를 이루며, 북북서 내지 남-북의 주향에 동측으로 $20^{circ}{\;}~45^{\circ}$ 의 경사를 보인다. 이 단층대는 서측으로부터 제4기 사력층 내의 역단층 3조와 제4기층을 화강암과 이를 부정합으로 덮는 제4기층이 올라탄 역단층 1조로 구별되며, 복합적인 역단층성 단층대의 양상을 보인다. 단층조선은 남동 방향($125^{\circ}$)으로 $20^{\circ}$ 침강한다. 이는 남동-북서 압축에 기인한 역단층성운동에 의해 생성된 것으로 보인다. 이 단층대는 불국사 일원에서 이미 알려진, 보다 서편에 발달하는 북서-남동 방향의 제4기단층선과는 다른 또 하나의 제4기단층선으로 확인된다.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.135-138
• /
• 2003

대부분의 제4기단층은 제3기 단층이 재활동한 것들로써, 신기 조구조적 단층 여부를 규명하려면, 제4기에 형성된 단구(段丘, Terrace)의 변위가 수반 증명되어야한다. 대표적인 단층은 읍천단층과 수렴단층을 들 수 있다. 특히 읍천단층은 기반암단층으로 언급될 경우에는 읍천 단층이라 하고, 제4기에 재활동한 부분을 거론할 경우에는 제4기 읍천단층이라고 구분하여 혼란을 피하도록 하였다. (중략)

• The Journal of the Petrological Society of Korea
• /
• v.18 no.1
• /
• pp.19-30
• /
• 2009

The main fault of Yangsan Fault Zone (YFZ) and Quaternary fault were found in a trench section with NW-SE direction at an entrance of the Sinheung village in the northern Eonyang, Ulsan, Korea. We interpreted the movement history of the southern part of the YFZ from the geometric and kinematic characteristics of basement rock's fault of the YFZ (Sinheung Fault) and Quaternary fault (Quaternary Sinheung Fault) investigated at the trench section. The trench outcrop consists mainly of Cretaceous sedimentary rocks of Hayang Group and volcanic rocks of Yucheon Group which lie in fault contact and Quaternary deposits which unconformably overlie these basement rocks. This study suggests that the movement history of the southern part of the YFZ can be explained at least by two different strike-slip movements, named as D1 and D2 events, and then two different dip-slip movements, named as D3 and D4 events. (1) D1 event: a sinistral strike-slip movement which caused the bedding of sedimentary rocks to be high-angled toward the main fault of the YFZ. (2) D2 event: a dextral strike-slip movement slipped along the high-angled beddings as fault surfaces. The main characteristic structural elements are predominant sub-horizontal slickenlines and sub-vertical fault foliations which show a NNE trend. The event formed the main fault rocks of the YFZ. (3) D3 event: a conjugate reverse-slip movement slipped along fault surfaces which trend (E)NE and moderately dip (S)SE or (N)NW. The slickenlines, which plunge in the dip direction of fault surfaces, overprint the previous sub-horizontal slickenlines. The fault is characterized by S-C fabrics superimposed on the D2 fault gouges, fault surfaces showing ramp and flat geometry, asymmetric and drag folds and collapse structures accompanied with it. The event dispersed the orientation of the main fault surface of the YFZ. (4) D4 event: a Quaternary reverse-slip movement showing a displacement of several centimeters with S-C fabrics on the Quternary deposits. The D4 fault surfaces are developed along the extensions of the D3 fault surfaces of basement rocks, like the other Quaternary faults within the YFZ. This indicates that these faults were formed under the same compression of (N)NW-(S)SE direction.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.349-363
• /
• 2005

Many Quaternary faults are recognized as thin gouge and narrow cataclastic zone juxtaposing the Bulguksa granite and Quaternary deposit bed in the eastern block of the Using Fault, Korea: Gaegok 1, Caegok 2, Singye, Madong Wonwonsa and Jinhyeon faults. This study was performed to calculate chemical change, volume change, silica loss and fluid-rock ratio taken place in gouge zones of these Quaternary faults using XRF, XRD, EPMA. The chemical compositions of fault rocks reveal that the fault gouges are depleted in $SiO_2,\;Na_2\;O,and\;K_2O$ and enriched in $Al_2O_3,\;Fe_2O_3,\;P_2O_5,\;MgO,\;MnO,\;CaO,\;and\;LOI(H_2O+CO_2)$ relative to protoliths. The fact that there is enrichment of relatively immobile elements and depletion of the more soluble elements in the fault gouges relative to protoliths can be explained by fluid-assisted volume loss of $56\%$ for Caegok 1 fault, $22\%$ for Caegok 2 fault,$34\%$, for Singye fault, $8\%$ for Madong fault, $2\%$ for the Wonwonsa fault and $53\%$ for the linhyeon fault. Madong fault and Wonwonsa fault where ratios of the volume change, silica loss and fluid-rock are low might have acted as a closed system for fluid activity, whereas Caegok 1 fault and Jinhyeon fault with high ratios in those factors be an open system. The volumetric fluid-rock ratios range $10^2\sim10^4$ for all faults, being highest in Caegok 1 fault and Jinhyeon fault whose fluid activity was most significant.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.635-643
• /
• 2009

In this paper, a Quaternary fault is described, which is developed in the mid-eastern part of Ulsan Fault Zone, near the southern Gaegok-ri, Oedong-eub, Gyeongju, Korea. The Gaegok 6 fault is developed along the contact between Early Tertiary granite and Quaternary gravel deposit overlying unconformably the granite. The fault strikes $N02^{\circ}{\sim}22^{\circ}E$ and dips $45^{\circ}{\sim}80^{\circ}$ to the west. This fault has a 30~50 cm wide cataclastic shear zone with gouge zone, mixed with Quaternary sediments and fault breccia of granite. In the main Quaternary fault plane, the orientation of striation is $17^{\circ}$, $356^{\circ}$, indicating a dextral strike-slip faulting with some normal component. There is another striation ($78^{\circ}$, $278^{\circ}$ and $43^{\circ}$, $270^{\circ}$) with reverse-slip sense, developed on the subsidiary plane which cuts the main Quaternary fault plane. In brief, the fault has been developed between the granite in the western part and the Quaternary gravel deposit in the eastern part. The western block of fault is uplifted. The striations and movement senses of faults indicate multiple compressional stages in this region. The fault has a similar orientation, westward dipping geometric pattern, and reverse sensed kinematic pattern with Gaegok 1 fault developed in the north. Thus, the Gaegok 6 fault is probably a southern extension of Gaegok 1 fault.

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.155-168
• /
• 1999

The paleoseismological importance of the Yangsan fault zone was examined by historical earthquake data, aerial photograph, and trench survey of the area. Occurrences of great earthquakes during the historical time indicate that the Yangsan and/or Ulsan fault have been active during the late Quaternary and generated historical events. Geomorphological evidences of the recent fault activity are clearly shown both in the northern segment (Yugye-ri, Tosung-ri and Naengsu-ri areas) and in the southern segment (Eonyang to Tongdosa areas) of the Yangsan fault. The main Yangsan fault is characterized by fault gouges and NNE-SSW lineaments. The reverse faulting in the Yugye-ri area generated about three-mater displacement of the lower terrace deposits. On the other hand, a major strike-slip movement with a minor component of 5-12 m vertical displacement was identified by the offset of the higher terrace surface in the Eonyang area.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.349-359
• /
• 2020

The Ulsan Fault Zone (UFZ) of NNW trend is developed in the Gyeongsang Basin, the southeastern part of the Korean Peninsula, and the Quaternary faults have been found around the UFZ. The faults generally thrust the Bulguksa igneous rocks of Late Cretaceous-Early Tertiary upon the Quaternary deposits or are developed within the Quaternary deposits. They mainly show the reverse-slip sense of top-to-the west movement. The lines connecting the their outcrop sites show a zigzag-form which is similar to the orientation of their fault surfaces which show the various trends, like (W)NW, N-S, (E)NE, ENE trends. The E-W trending dextral strike(-slip) fault is found in the Quaternary deposits of the Singye-ri valley. It cuts the N-S trending reverse fault and are cut by the N-S trending thrust fault again. Two types of at least two times of Quaternary tectonic movements related to the formation of neotectonic fault zone in the Singye-ri valley are considered from such the geometric and kinematic characteristics of Quaternary faults. One is the reverse faulting of N-S trend by the E-W directed 1st compression and associated the strike-slip tear faulting of E-W trend, and then the thrust faulting of N-S trend by the E-W directed 2nd compression. The other is the reverse faulting of N-S trend, and then the dextral strike-slip faulting of E-W trend by the NW-SE directed compression, and then the thrust faulting of N-S trend. In this paper is suggested the development history of Singye-ri neotectonic fault zone on the basis of the various orientations of Quaternary fault surfaces around the UFZ, and the zigzag-form connecting line of their outcrop sites, and the compressive arc-shaped lineaments which convex to the west reported recently in the Yangsan Fault Zone.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.85-94
• /
• 2002

XRF, XRD, EPMA have been used to investigate microstructures and mineralogical changes caused by the faulting and fluids associated with faulting in the Quaternary fault gouge zones at the Sangchon, Ipsil and Wangsan faults located at the southeastern part of the Korean Peninsula. The chemical compositions of faulted rocks and protoliths analyzed by XRF show that the fault gouges are relatively enriched in TiO$_2$, P$_2$O$_{5}$, MgO, and Fe$_2$O$_3$) compared with protoliths, indicating that the fluids associated with faulting were highly activated. XRD results show that the fault gouges predominantly consist of quartz, feldspar, calcite and clay minerals. Clay minerals formed in the gouge zones are mainly composed of smectite characterized by a dioctahedral sheet. Based on EPMA analyses various kinds of sulfide, carbonate, phosphate minerals were identified in the gouge zones and protoliths. Xenotime of grey fault gouge of the Sangchon fault and sulfide minerals of contact andesitic rock of Ipsil fault and contact grey andesitic rock of Wangsan fault were probably formed by inflow of hydrothermal solution associated with faulting prior to the Quaternary. Carbonate minerals of contact andesitic rock and gouge zone of the Ipsil fault were formed by inflow of fluid associated with faulting prior to the Quaternary. They are heavily fractured and have reaction rim on their edge, indicating that faultings and inflow of fluids were highly activated after carbonate minerals were formed. Calcites of Wangsan fault seemed to be formed in syntectonic or posttectonic Quaternary faulting.g.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.533-541
• /
• 2004

A steadily consolidated conglomerate formation (CCF) is developed thickly around Tabjeong-ri and Janghang-ri to the east of Tohamsan, Gyeongju City. The CCF has been regarded to a basal conglomerate, Cheonbug Conglomerate, of the Yonil Group by Tateiwa (1924). Son et al. (2000) correlated the CCF to the Songjeon Formation, which occupies the southwestern block of Tertiary Waup Basin. However, the Songjeon Formation stratigraphically does not face to the extension of the CCF. OSL (Optically Stimulated Luminescence) data on the reddish brown to bluish gray psammitic layers, which are intercalated in the CCF, yielded to 85∼92 ka. Therefore, the age of CCF constrains to the last interglacial stage (MIS 5c-5e) rather than the Early Miocene Cheonbug Conglomerate. The Late Pleistocene Tohamsan Formation (TF) is newly named to the CCF and is subdivided to megabreccias and boulders. A rectangular basin, in which the TF is accumulated, is bounded by Oedong and Yonil faults (segments of Yonil Tectonic Line) and is given a name of Toham Basin. Neotectonically, Pliocene EW-transpression gave an effect of the top-up-to-the-west reverse faulting and the accompanied normal fault movement during the last interglacial age (ca. 100 ka). The basin is graben type, in which basin fills are composed of collapsed colluvial deposits, TF.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.321-330
• /
• 2008

This study, geological survey was carried out in order to study on the geology, geological structure and volcanic activity of the Ulleung-do volcano body. Ulleung-do is the volcano body of about 3,000m heights from the East Sea seabed. The geology of Ulleung-do is divided into basaltic agglomerate, trachytic agglomerate, trachyte, trachytic pumice and trachyandesite in ascending orders. The faults in caldera of Nari Basin came to make the reverse triangle style in compliance with sinking. The faults in circumference of Nari Basin are ranging with northeast-southwest direction and northwest-southeast direction. The Quaternary volcanic activities in the Ulleung-do are divided into 5 activity period. The engineering geologists and the applied geologists were not easy to apply because complicated geology of Ulleung-do. Therefore, this study supplied simple geology of Ulleung-do for them.