• Korean Journal of Crystallography
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2009

이온산란 분광법(ISS: Ion Scattering Spectroscopy)은 표면 원자의 구조를 러더포드 후방산란법(RBS: Rutherford Backscattering Spectroscopy) 등과 같이 실공간에 대하여 직접 정보를 얻는 방법이다. 그 중에서도 산란각도를 $180^{\circ}$로 고정하여 산란이온 검출기를 설치한 직충돌 이온산란 분광법(ICISS: Impact Collision Ion Scattering Spectroscopy)은 산란된 이온의 궤적이 입사궤도와 거의 동일하기 때문에 산란궤적의 계산이 간단해지고, 최외층 뿐만 아니라 표면에서 수 층 깊이의 원자구조의 해석이 가능하다. 또한 비행시간형(TOF: Time-Of-Flight) 분석기를 채택하여 산란 이온 및 중성원자를 동시에 측정하면 입사 이온의 표면에서의 중성화에 관계 없이 산란 신호를 얻으므로 표면 원자의 결합 특성에 영향 받지 않고 사용할 수 있다. 본고에서는 ICISS의 원리, 장치, 측정방법 등을 소개한 제1편 및 반도체 표면구조, 금속/반도체 계면 등의 해석에 관하여 기술한 제2편에 이어서 세라믹 재료의 표면 원자 구조, 세라믹 박막의 원자 구조, 흡착 기체의 구조, 원소의 편석 등에 관한 연구 사례를 소개하고자 한다.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.5
• /
• pp.3-10
• /
• 2013

This study was carried out to obtain basic data for architectural plans on the facilities relocation needed in operating the departmentalized classroom system at the latest built middle schools. For this, floor plans of ten middle schools built in Gwangju after 2009 were analyzed about space configuration and area holding state. The process of this study is as follows: (1) To investigate proper area holding state for operating variation type, this study analyzed area of departmentalized classrooms, homebases and teachers' offices. (2) To investigate space configuration for operating variation type, this study analyzed composition of departmentalized classrooms, learning-support facilities and homebases. (3) On the base of those analyses, this study proposed some directions for architectural plans on the facilities relocation.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1483-1495
• /
• 2006

The navigation mesh represents a terrain as a set of triangles on which characters may move around. The navigation mesh cab be generated automatically, and it is more flexible in representing 3D surface. The number of triangles to represent a terrain may vary according to the structure of the terrain. As characters are moving around on a navigation mesh, the path planning can be performed more easily by projecting the 3D surfaces into 2D space. However, when the terrain is represented with an elaborated mesh of large number of triangles to achieve more realistic movements, the path finding can be very inefficient because there are too many states(triangles) to be searched. In this paper, we propose an efficient method of path finding in 3D games where the terrain is represented by navigation meshes. Our method uses the visibility tests. When the graph-based search is applied to elaborated polygonal meshes for detailed terrain representation, the path finding can be very inefficient because there are too many states(polygons) to be searched. In our method, we reduce the search space by using visibility tests so that the search can be fast even on the detailed terrain with large number of polygons. First we find the visible vertices of the obstacles, and define the heuristic function as the distance to the goal through those vertices. By doing that, the number of states that the graph-based search visits can be substantially reduced compared to the plane search with straight-line distance heuristic.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.84-93
• /
• 2018

Three-dimensional (3D) numerical simulations have been carried out to study how coolant injection conditions influence the cooling efficiency and projectile ejection performance in a mixture-gas ejection system (or gas-steam launch system). The 3D single-phase computational model was verified using a 1D model constructed with reference to the previous research and then a two-phase flow computation simulating coolant injection on to hot gas was performed using a DPM (Discrete Phase Model). As a result of varying the coolant flow rate and number of injection holes, cooling efficiency was improved when the number of injection holes were increased. In addition, the change of the coalescence frequency and spatial distribution of coolant droplets caused by the injection condition variation resulted in a change of the droplet diameter, affecting the evaporation rate of coolant. The evaporation was found to be a critical factor in the design optimization of the ejection system by suppressing the pressure drop while the temperature decreases inside the breech.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.163-172
• /
• 2018

In this study, selective catalytic reductions (SCR) of NO commercial catalysts were used to investigate the effect of ammonia gasification from urea solution. The effects of catalytic chemical composition on the reaction temperature and space velocity were studied. $V_2O_5/TiO_2$ catalysts, which are widely used as SCR catalysts for removal of nitrogen oxides, have better ammonia formation compare to $TiO_2$ and $WO_3-V_2O_5/TiO_2$ catalysts. The $TiO_2$ catalyst not supporting the active metal was not affected by the space velocity as compared with the catalyst supporting $V_2O_5$ or $WO_3-V_2O_5$. The active metal supported catalysts decreased in the ammonia formation as the space velocity increased.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.77-83
• /
• 2016

Pipe working is consist of design, making and installation. Pipe line is consist of spool pipes which are made in fabrication shop. And these spool pipes installation in shipyard. Spool pipes are designed based 2D Drawings(ISO Drawing), so spool pipes are not considered working area, that wake decreasing working efficiency and delay working time. In this paper, suggest make spool pipe design method using analysis working area about 3D CAD model and genetic algorithm.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.57-64
• /
• 2019

In this paper, an efficient prediction-based parallel simulation method using spatially partial simulation strategy is proposed for improving both the performance of the event-driven gate-level timing simulation and the debugging efficiency. The proposed method quickly generates the prediction data on-the-fly, but still accurately for the input values and output values of parallel event-driven local simulations by applying the strategy to the simulation at the higher abstraction level. For those six designs which had used for the performance evaluation of the proposed strategy, our method had shown about 3.7x improvement over the most general sequential event-driven gate-level timing simulation, 9.7x improvement over the commercial multi-core based parallel event-driven gate-level timing simulation, and 2.7x improvement over the best of previous prediction-based parallel simulation results, on average.

• Journal of the Korean Geographical Society
• /
• v.38 no.3
• /
• pp.444-462
• /
• 2003

There has been emerging general agreement on the relative importance of producer services in a economy. This research describes the spatial patterns and trends in producer services at different spatial scales. The other research aim is to explain the impacts of producer services on spatial changes at the national level and at the intra-metropolitan level in Seoul. Producer services have highly concentrated in metropolises, especially Seoul. Between 1986 to 2001, an important spatial change in the producer services at the national level has been their growth in the Capital Region, reinforcing the role and function of Seoul. This reinforced role of Seoul is closely related to its competitive advantages arising from economies of urban. There have been some dramatic changes in the location of producer services within Seoul. The most important change was the growth of the Youngdong area, previously a sub-center for businesses, as the most important location for producer services, exceeding the previous dominant role of the CBD area. The changing urban form of Seoul is partly related to the onset of some diseconomies of urbanization in the CBD, while at the same time Youngdong has reached a stage at which it is benefiting from the agglomeration of a variety of firms, in addition to a favourable social and physical infrastructure.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.67-78
• /
• 1995

Many countries in the world have already begun digitizing spatial objects and features located in either above -or under- ground in order to conduct various spatial analyses including disaster prevention planning. At the same time, the amount of information to be exchanged will be astronomical once the information super highways will be completed to connect many countries in the world Ways to exchange and transfer of spatial information. efficiently will have to be developed in order to avoid duplicated efforts and money and to maximize the use of spatial information 1hat has already been collected. One way to maximize the efficiency in sharing spatial information is to develop a transfer standard. thus, the purpose of this paper is to review spatial data transfer standard(SDTS) with the hope that it would shed light on the development of a transfer standard for Korea

• Journal of Korea Spatial Information System Society
• /
• v.7 no.3 s.15
• /
• pp.45-53
• /
• 2005

Nowadays, using the mobile communication devices, such as a mobile phone, PDA, telematics device, and so forth, are increasing. The large parts of the services with these mobile devices are the position tracking and the route planning. For offering these services, it is increasing the use of the spatial data on the mobile environment. Although the storage of mobile device expands more than before, it still lacks the necessary storage on the spatial data. In this paper, lossy compression technique on the spatial data is suggested, and then it is analyzed the compression ratio and the amount of loss data by the test. Suggested compression technique on the spatial data at this paper is applied to the real-data, and others methods, suggested at the previous studies, is applied to same data. According as the results from both are compared and analyzed, compression technique suggested at this study shows better performance when the compression result is demanded the high position accuracy.