• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.85.2-85.2
• /
• 2018

금속 나노구조체에서의 localized surface plasmon resonance와 surface-enhanced Raman scattering 현상은 센서를 비롯한 다양한 응용분야를 가지고 있다. 나노구조체 array 형성을 위한 대표적인 top-down 방식인 e-beam lithography 공정은 제조비용이 매우 높고 대량생산 및 대면적화에도 한계가 있기에 polystyrene(PS) bead의 self-assembly를 이용한 nanosphere lithography와 같은 bottom-up 방식이 폭넓게 연구되고 있다. Closed-packing된 PS bead의 monolayer를 얻기 위해서는 기판의 친수성 처리가 필요한데, 기존의 많은 연구에서는 기판의 표면개질에 화학적 공정을 이용하고 있다. 하지만 이는 기판 선택의 자유도를 떨어뜨리는 원인이 된다. 금속이나 실리콘 기판에서는 산성 용액을 이용한 화학적 처리방법을 적용할 수 있지만 SU-8과 같은 감광액 및 폴리머 기판에서는 산에 대한 내구성이 떨어져 화학적 공정의 도입이 불가능 하기 때문이다. 본 연구에서는 이러한 한계점을 극복하기 위해 $UV-O_3$ 공정으로 친수성 처리된 다양한 기판에서 spin coating을 통한 PS monolayer를 제조하였는데, UV 램프의 에너지 조절을 통해 기판에 붙어있는 유기물들을 효과적으로 제거할 수 있었고 $O_3$ 생성 및 분해 과정에서 기판 표면에 친수성 화학 작용기를 생성시킬 수 있었다. 제조된 PS layer를 mask로 사용하여 Ag, Al, Au 등 다양한 나노구조체 array를 형성하여 array 주기에 따른 플라즈몬 공명 특성을 분석하였다. 레이저 조사로 나노구조체의 형상을 변화시킴으로써 동일한 물질과 주기를 가진 array에서도 플라즈몬 특성의 변조가 가능함을 확인하였는데, 이는 금속 나노구조체의 응용측면에서 매우 고무적인 발견이다.

• Journal of the Korean Regional Science Association
• /
• v.33 no.3
• /
• pp.61-78
• /
• 2017

Among several policies for industrial decentralization introduced since the 1960s, business relocation grant policies put a heavy financial burden on central and local governments. This study investigates the change in the likelihood of manufacturing establishments' relocation to the non-SMA associate with the change in business relocation grant policies. Using the mining and manufacturing survey data from 1996 to 2014, manufacturing firms' relocation decision model in nested logit structure was estimated. The data showed that the proportion of movements from the SMA to the non-SMA significantly increased after the introduction of the grant policies. However, estimation results of firms' relocation decision model indicated that the likelihood of firms relocating from the SMA to the non-SMA decreased after the introduction of the grant policies. In particular, firms' likelihood to move into the rural regions is even lower in the period of the grant extension. This suggests that increasing rate of relocations toward the rural regions may have been driven by the growing advantage of rural locations, such as low land rent and improvement in market accessibility, rather than the grants per se. This implies that the alleviation of physical and environmental constraints of the rural regions and the creation of business friendly environment such as easy access to premises at reasonable prices and strengthened linkage with the SMA, rather than simple provision of business relocation grants, needed to attract businesses in the rural regions.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.117-133
• /
• 2016

This study was to investigate the quality characteristics of sourdough bread made with 4 kinds of kamut sour starter. Kamut sour starters were made according to dough yield of sour starter and yeast adding on sour starter. We exmanined pH level, fermentation rate, specific volume, CrumbScan, moisture content, color value, texture analyzer, shelf-life test and sensory evaluation for observing quality characteristics of sourdough bread. From the results of pH measurement, kamut sourdough breads had lower pH value in dough and crumb pH than CON. In the experiment of dough's fermentation rate, CON had the rapidest fermentation rate among the samples initially, but the experimental groups also expanded as much as CON grew in spite of its slow fermentation. Specific volume and CrumbScan results suggested that CON had the largest volume. In addition, CM and TM had smaller volume than Pool and Biga. The sample that had the highest moisture content was Pool because its sour starter had the most amount of water. In color value test, CON had lighter crumb and crust color than other specimens. As a result of the TPA and shelf-life tests, CON had the softest hardness after 24 hours. However, Pool had similar hardness with CON after 72 hours. The result of the acceptance test of sourdough breads indicated that people prefered Pool and Biga to TM and CM. Difference test showed similar results with prior experiments. As the final outcome, Poolish was chosen as the optimal formula for kamut sour starter.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.9
• /
• pp.169-178
• /
• 2018

The ice machine is the machine for making ice. As most of the companies that manufactures and sells the ice machine are small and medium-sized companies, they have been they have been experiencing the trouble for the after-sales service after selling the machine. The difficulties of the after-sales service are mostly caused by unnecessary customer service requests of the purchaser, which eventually leads to the unnecessary expenditure of the seller and the purchaser. However, financially, the poor ice machine manufacturers want to reduce this cost as much as possible. Furthermore, even if they want to sell their products overseas, they are hesitating because of the after-sales service. For this reason, the companies making the ice machine need a system which checks the status of the ice machine and takes the proper actions without the visiting service. Therefore, this paper introduces the remote control and operational status monitoring systems which can monitor the status of the ice machine in the remote area and control it as needed. Through the developed system, the company manufacturing the ice machine and the manager of the ice machine can understand the current status of the ice machine and respond against the ice machine's trouble, immediately. In addition, it can be expected to have great effects on cost reduction because the maintenance and management after selling can be efficiently performed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.399.2-399.2
• /
• 2016

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 높은 효율과 낮은 제조비용, 높은 신뢰성으로 인해 박막 태양전지 중 가장 각광받고 있다. 특히 유리기판 대신 가볍고 유연한 철강소재나 플라스틱 소재를 이용하여 발전분야 외에 건물일체형, 수송용, 휴대용등 다양한 분야에 적용이 가능하다. 이러한 유연 기판을 이용한 CIGS 태양전지의 개발을 위해서는 기판의 특성에 따른 다양한 공정개발이 선행되어야 한다. Poly-imide와 같은 유연기판은 공정온도가 $400^{\circ}C$이하로 낮고 기판이 매우 얇아 기존 Mo 공정을 개선하여야한다. 이러한 유연기판의 특성을 고려하여 본 연구에서는 기존 bi-layer Mo의 bottom layer의 두께를 조절하여 박막의 strain을 조절하였다. 유연기판으로는 SKC KOLON에서 제조된 GL type의 기판을 사용하였다. 기판의 두께는 50um이다. 먼저 Mo의 bottom layer 두께 비율을 기존 12.5%에서 50%로 증가 시켰으며 전체 박막의 두께 역시 900nm에서 500nm로 두께를 감소시키며 실험을 실시하였다. 그 후 흡수층은 Co-Evaporation 방법을 이용하여 제조하였으며 이때 공정온도는 기존 공정온도에서 450, $400^{\circ}C$로 낮추어 흡수층을 제조하였다. 소자 제조 후 초기 Mo의 strain 개선과 저온공정이 적용되지 않은 경우 4.4%에서 공정 최적화 후 13%로 효율이 증가하였다. 제조된 흡수층은 SEM, XRF, XRD등을 이용하여 분석하였으며 그 외 일반적인 방법을 이용하여 Mo, CdS, TCO, Al grid를 제조하였다. AR 코팅은 제외 하였으며 제조된 소자는 솔라 시뮬레이터를 이용하여 효율 특성 분석을 실시하였으며 Q.E. 분석을 실시하였다.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.700-704
• /
• 1997

Fermentation and morphological characteristics of rice bread baked with gums, lipids, and glutens added dough were investigated to establish the standard recipe for rice bread processing. All gum-type additives 1ed to successful formation of rice bread. Hydroxypropyl-methyl-cellulose among tested gums showed the best volume expansion and successful formation of rice bread. Addition of vegetable oils gave better effect on increasing the specific loaf volume and tenderness of rice bread than addition of the solid-type lipids such as margarin and lard during rice bread processing. Dry heating during baking of the rice bread gave more desirable effect on specific gravity of rice bread than wet heating. High-amylose rices such as Suweonjo, AC 27, and IR 44 showed better formation of rice bread in the case of adding 3% hydroxypropyl-methyl-cellulose, while Suweon 230 and Pusa-33-30 showed slightly better formation of rice bread in the case of adding the gluten and strong hard flour. The glutinous rice Hangangchalbyeo failed to the formation of rice bread in both cases of adding 3% hydroxypropyl-methyl-cellulose and the gluten and hard flour.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.40-45
• /
• 2015

Simple poor-cosolvent casting was used to surface treat biodegradable elastic poly(L-lactide-co-${\varepsilon}$-caprolactone) (PLCL; 50:50) copolymer films that presented lotus-leaf-like structures. We evaluated whether the lotus-leaflike-structured PLCL (L-PLCL) films could be used as a biomaterial for artificial vascular grafts. The surface morphology, hydrophobicity, and antithrombotic efficiency of the films were examined while immersed in platelet-rich plasma (PRP) using scanning electron microscopy (SEM) and a contact angle meter. The recovery and crystallinity of the films were measured using a tensile-strength testing machine and an X-ray diffractometer, respectively. The solvent containing acetic acid, as a poor co-solvent, and methylene chloride mixed in a 1:2 ratio produced an optimal PLCL film with a water contact angle of approximately $124^{\circ}$. Furthermore, the surface of the L-PLCL films immersed in PRP showed a lower rate of platelet adhesion (<10%) than that of the surface of an untreated PLCL film immersed in PRP.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.151-160
• /
• 2001

Polymeric membranes consisting of poly(d,1-lactide) as a polymer matrix and crystallizable progesterone as a drug were prepared by coagulating polymeric solutions. The homogeneous casting solutions in dimethyformamide were solidified by using three different coagulating processes : solvent evaporation under vacuum, solvent extraction via immersion into the nonsolvent bath, or vapor exposure at high humidity condition. With solvent removal via evaporation under vacuum, the cast solution film was vitrified to form a homogeneous film containing progesterone of spherical shape distributed evenly in the film. Being prepared by solvent extraction via immersion into a water bath, the resulting membrane showed an asymmetric structure, with progesterone of big crystallites distributed unevenly in the structure. On the other hand, the coagulation under high humidity transformed the cast film into a sponge-like structure, where progesterone took a shape like flake.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.861-865
• /
• 2009

Technical development in car has utilized electronic controls (ECU, Electronic Control Unit) recently if was achieved machine such as engine performance in priority and electronic side technical development that improve safety, convenience, expense etc. is proceeded vigorously. Also, preference of consumers for car is various model's number according to change at the fast speed and complexity of software required from vanguard service development was increased greatly. Software development expense dominated considerable weight in car manufacture expense by such change and automakers established OSEK/VDX that is standard of automobile embeded system to reuse application software by module to respond this and transplant easily to other control device. Do when search about all item that is necessary in real-time OS structure that examines OSEK/VDX standard that is presented as the alternative to respond environment that change rapidly that refer in dignified mien after it is original, and uses actuality OSEK/VDX.

• The Journal of Society for e-Business Studies
• /
• v.15 no.1
• /
• pp.89-101
• /
• 2010

In some industries, manufacturing firms' distinctive competences include not only product superiority but also service excellence. For example, in a highly volatile and dynamic market, flexibility and responsiveness are more valued than just the product cost. And sales order processing, in that respect is a very important process. However, previous studies on sale order processing have considered only due-date assignments or dealt with production scheduling to minimize production cost or delivery lead time. Due to recent advances in information technology, a new approach is possible in dealing with sales order processing. For example, RFID(Radio Frequency IDentification) and ubiquitous computing technology adds real time visibility and traceability to supply chain. In this study, we develop a new due-date re-negotiation process for sales order management and propose a new business integration model to support the re-negotiation process based on RFID, ubiquitous computing technology and RosettaNet's PIPs.