• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.510-512
• /
• 1999

In this paper, we present a method for the analysis and design of fuzzy controller for nonlinear systems. In the design procedure, we represent the dynamics of nonlinear systems using a Takagi-Sugeno fuzzy model and formulate the controller rules, which shares the same fuzzy sets with the fuzzy system, using parallel distributed compensation method. Then, after the feedback gain of each local state feedback controller is obtained using the existing optimal pole-placement scheme, we construct an overall fuzzy logic controller by blending all local state feedback controller. Finally, the effectiveness and feasibility of the proposed fuzzy-model-based controller design method has been evaluated through an inverted pendulum system.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.319-322
• /
• 1992

This paper proposes indirect adaptive pole placement adaptive controller using a modified least squares method. If an adaptive controller has good performance, it is necessary that an estimator have fast convergence. This paper presents a modified least squares method which guarantees the stability of estimator and has fast convergence. In this algorithm, information on signal level is obtained from the determinent of covariance matrix and according to it, weighting factor is tuned.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.925-928
• /
• 2013

In this paper, we propose a relay-based wireless power transmission scheme in order to solve the problems of an existing wired power transmission for energy harvesting system. The proposed scheme can be transferred electromagnetic induction-based wireless power transmission by placing a 4-way coils in the energy block. We confirm the reliability of the electricity transmission through the relay control algorithm. Consequently, the proposed scheme can extend the transmit receive paths of transmission power.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2008

Pneumatic driving systems have hard non-linear characteristic and large friction force compared with driving power. Hence, it cannot be robust against parameter uncertainties, modelling error, disturbance and noise. In this study, we apply a mixed $H_2/H_{\infty}$ control to the generalized plant for a pneumatic driving apparatus system including parameter uncertainty and disturbance. In order to design the $H_2/H_{\infty}$ controller, we use the LMI technique. To evaluate control performance and robust stability of the designed controller, we compare it with a conventional controller such as PVA(Position-Velocity-Acceleration state controller) using the simulation results. As a result, it can be known that designed controller shows better robust stability than the conventional controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.1
• /
• pp.33-44
• /
• 1989

A controller disign method is proposed for multivariable nonlinear stochastic systems with hard nonlinearities such as Coulomb friction, backlash and saturation. In order to take the nonlinearities into account statistical linearization techniques are used. And multi- variable pole placement techniques are applied to design controller for the statistically linearized multivariable systems. The basic concept of the controller design method is to solve two coupled equations, characteristic equation and Lyapunov equation, simultaneously and iteratively for statistically linearized multivariable stochastic systems. An aircraft with saturation serves as a design example. The design example illustrates the influence of nonlinear effects. The results of the analysis are compared to Monte Carlo simulation to test their accuracy.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.913-916
• /
• 1988

Indirect adaptive pole assignment PID controllers for unknown systems with time varying delay, is proposed. Unknown system parameters are estimated by recursive least square method, and time varying delay is estimated using indirect predictors. Since the order of parameter vectors didn't increase, the computational burden is not largely increased in spite of using indirect adaptive control method with time varying delay estimation. Computer simulation is performed to illustrate the efficiency of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2548-2550
• /
• 2000

RTP(Rapid Thermal Processing)은 IC제조 공정과 관련된 열처리 과정에 사용되는 단일 웨이퍼프로세스 기술이다. 반도체 웨이퍼를 고속 열처리할 때 웨이퍼별로 작은 반응실에서 가열, 가공, 냉각된다. 현재 사용되는 반도체 열처리장비는 고온로(furnace)에의해 대부분 이루어지지만, 시간이 많이 걸려서 주문형반도체 생산과 같은 다양한 종류의 웨이퍼를 소량 생산하는데는 부적절하다. 이에 매우 적은 시간이 소요되는 RTP장비가 많이 연구되고 있다. 그러나 RTP는 예기치 못한 몇 가지의 문제점을 일으킨다. 그중 하나는 웨이퍼 표면에 분포된 온도의 불 균일성이다. 이러한 불 균일성은 웨이퍼의 표면에 심각한 왜곡(distortion)을 일으켜 좋지 못한 결과를 가져오게 한다. 이번 논문의 목적은 RTP시스템을 수학적으로 모델링하고, 이를 이용하여 멀티 램프 시스템의 입력값을 조절하여 이미 배치된 램프에 대한 최적의 온도 균일도에 알맞은 각 램프입력을 구하여 램프 입력 프로파일을 만들고 또한 이를 이용하여 외란에 대한 PID 제어기 설계를 목표로 한다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.11
• /
• pp.913-921
• /
• 1989

This paper deals with a pole placement indirect adaptive control algorithm for discrete-time linear plants with arbitrary zeros. The resulting closed-loop control system is shown to be globally stable subject to the assumptions that an external input is persistently exciting and a lower bound on the magnitude of the Sylvester resultant of the plant numerator and denominator polynomials is known. The problem of controllability of the plant estimate in indirect adaptive control is handled by using an extended parameter correction. The validity of the proposed control algorithm is assured through simulation for a second-order plant.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.221-223
• /
• 2008

In Korean urban transit system, when the railcar starts, the electric power is absorbed from the line, and then the line voltage is instantaneously collapsed to provide a large accelerating torque. On the other hand, when the railcar brakes, the regenerative power is created and it increases the line voltage at the pantograph of the railcar. Therefor, by using the energy storage system near the train, the regenerated power can be saved to this system. The energy storage system is consisted of supercapacitor and a bidirectional DC-DC converter. In this paper, controller design of a bidirectional DC-DC converter based on pole-assignment is proposed. This method can be easy to design controller. Simulation results by using the calculated parameters are presented.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.5-5
• /
• 2017

방제 작업은 병해충을 줄여 농산물의 품질과 생산량을 높이기 위한 필수 작업이다. 하지만 방제 작업은 고온 다습한 환경에서 작업하여 고된 작업 강도와 농민의 농약 중독 문제, 고령화 여성화로 인한 농가 일손 부족 문제로 농촌에서는 기피하고 있는 작업 중 하나이다. 이러한 점을 보완하기 위해 동력 살포기와 같은 기계를 이용하여 살포 작업을 실시하고 있으며, 스피드 스프레이어의 경우 2015년 기준 2,073 대가 농가에 공급되어졌다. 스피드 스프레이어를 사용하는 농가는 점차 증가하고 있으나, 현재 스피드 스프레이어의 살포 방식의 경우 농약을 다량 살포함으로써, 농약의 낭비, 환경오염의 문제점이 나타나고 있다. 이러한 점을 보완하기 위해 최근에는 방제 작업의 방식이 붐을 이용한 방제 작업으로 바뀌어가고 있는 추세이다. 붐 방제기의 경우 붐에 노즐을 배치하여 작물에 근접한 위치에서 농약을 정밀 살포하며, 스피드 스프레이어와 다르게 농약의 낭비를 줄일 수 있으며, 농약의 살포량을 제어하기 쉬운 장점이 있다. 본 연구에서는 기존의 트랙터 부착형 붐 방제기가 아닌 스피드 스프레이어를 개선한 붐식 스피드 스프레이어를 개발하기 위하여 현재 사용되고 있는 붐 방제기의 연구 동향 및 제품을 소개하고 개발에 필요한 기초 자료로 활용하고자 한다. 기존의 붐 방제기는 트랙터에 부착하는 형태로 개발되어졌으며 트랙터의 부착위치에 따라 전륜, 후륜형으로 나뉘고, 작물의 크기에 따라서 붐의 높이 및 붐의 각도를 조절하는 구조로 제작하여 사용되고 있다.