• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.218-231
• /
• 2008

The purpose of this study was made for the pre-teacher of university to enhance understanding for the concept of engine performance and to provide information regarding engine performance in the institute of teacher educator. This study was carried out through engine performance experiment with The Cussons Engine Test Bed P8250, internal combustion engine, in order to analyze data quantitatively, and apply and verify factors of controlling engine performance. The main results of this study are as follows: First, power and brake horsepower increased linearly, and torque over the mid-speed as engine rps(revolution per second) decreased. Second, the change of torque and specific fuel consumption were able to be verified and the concept of engine performance was able to be understood. Third, the experimental values of brake horsepower and torque on engine performance showed the same tendency as theoretical values. Fourth, air/fuel ratio increased proportionally as engine speed increased.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1267-1269
• /
• 2003

경량전철시스템의 개발시험을 수행하기 위하여 시험선을 구축하는데 있어서 각 하부시스템별로 요구사항을 도출하고 이를 설계에 반영하여야 한다. 이에 따라 본 논문에서는 신호제어시스템에 대하여 성능 및 기능시험을 감안한 요구사항을 도술하고 시험환경 및 시험조건에 따라 연차 검지 및 안전제동거리의 시험방법에 대해 검토하여 최적의 시험기법을 제안하고자 한다.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.586-591
• /
• 2003

This paper describes the result of proficiency testing by inter-laboratory comparisons for braking lining. Proficiency testing provides an objective means of assessing and demonstrating the validity and reliability of test results produced by laboratories. To more accuracy comparison test for braking lining test, they will be made the same test procedure and environment conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.7
• /
• pp.535-540
• /
• 2016

The braking device in railway vehicles decelerates or stops the train by dissipating the thermal energy converted from kinetic energy into the air. Therefore, the brake system is crucial for safety. In this paper, we performed a study on an electromechanical brake actuator using an electrical motor as an alternative to pneumatic air cylinders to reduce the idle running time in braking, which subsequently increases braking distance, and to ensure reliable response characteristics. Especially, to analyze the response characteristics of the electromechanical brake actuator, we measure the delay time, response time and power consumption compared to the air cylinder. It is confirmed that the electromechanical brake actuator can reduce reaction time by 0.1 seconds (Braking Action) and 0.46 seconds (Brake Release) compared to the air cylinder.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.85-90
• /
• 2011

To maintain the safety and efficiency of railroad vehicles, it is important to understand the working of the brake system with anti-skid control unit (ASCU) for rolling stocks. In this paper, a HILS (Hardware In-the Loop Simulations) system with ASCU hardware (for logic) and a DSP board (for dynamics) is developed to analyze skidding of the Hanvit-200 train during the process of braking. Experimental results are presented for the case that the skid on one of the four wheels is artificially generated using a Simulink model. A convenient GUI is prepared using ControlDesk of dSPACE.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.967-968
• /
• 2012

• Journal of the korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.25-29
• /
• 2003

한국타이어 동역학연구팀은 약 10여년전 처음 독립부서로 만들어져 현재 실차 시험 전문 드라이버들을 포함해서 연구인력만 약 20여명 되는 연구팀으로 발전했다. 동역학연구팀에서 수행되고 있는 업무는 성능 별로 크게 쏠림, 조종안정성, 제동, 승차감 등으로 나뉠 수 있으나 이번 기회에는 주로 조종안정성에 대한 연구활동에 대해 소개하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.145-154
• /
• 2006

Each part of drum brake system is loaded by continual mechanical force and thermal force every time of braking, so enough strength and stability are required. Thermal characteristic is one of the important factors in drum brake systems design. This paper presents the thermal performance such as temperature distribution and thermal contact stress of drum brake system considering several braking patterns; 80th heat braking test mode, heat fade braking test mode, general road mode, steep slope road mode and off road mode. Transient heat transfer analysis and Thermo elastic contact analysis is executed to obtain the temperature distribution, and to evaluate thermal stress of drum brake by using ABAQUS/Standard code. This procedure of analysis can effectively be used to improve the quality problem of brake system and to get design guideline of the new product.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.621-628
• /
• 2023

This study derived a reverse engineering procedure for verifying the design identity of original parts and developed parts for PMA(Parts Manufacturer Approval) and STC(Supplemental Type Certificate) of metal brake pads for transport aircraft, which are critical parts among aircraft parts and equipment. In Korea, the regulations for reverse engineering procedures are regulated by the Parts Manufacturer Approval Guidelines, and in the United States, AC No. 21. 303-4. In the reverse engineering for the brake pad, the detailed procedures for each component were determined by selecting verification test items to confirm identity based on sample quantity, dimensional tolerance, mechanical property measurement, material, weight and volume characteristics for each component. In addition, as a result of analyzing the regulation of Korea and United States, in the case of Korea, it is necessary to establish technical standards for braking systems for transport aircraft and regulations related to flight tests.