• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.822-823
• /
• 2015

본 논문은 시스템의 출력 신호가 복소지수함수의 형태인 경우 시스템을 추정하고 이를 이용한 제어에 관한 논문이다. 제안한 방법은 시스템의 출력 신호가 복소지수함수의 형태라면 이산푸리에변환을 통하여 중요모드에서의 첨두주파수와 제동계수를 추정하고, 이를 이용하여 시스템의 전달함수를 2차의 표준형 전달함수를 이용하여 간단하게 추정한다. 그리고 제어기는 이 추정한 전달함수를 이용하여 사용자가 원하는 응답을 나타내도록 설계하였다. DC모터의 위치제어 시스템의 실험을 통하여 제안한 방법의 타당성과 효율성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.157-159
• /
• 1999

This paper presented design of an $H_{\infty}$ controller for TCSC to enhance the damping of an inter-area oscillation in KEPCO power system. TCSC location is selected by using eigne sensitivity and frequency response. Nonliner time simulation and eigenvalue analysis show that the proposed TCSC $H_{\infty}$ controller can suppress the inter-area oscillations efficiently with induced reduction model correctly.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.83-89
• /
• 2005

This paper presents vehicle stability control algorithm based on 3-DOF vehicle model. The brake control inputs have been directly derived from the sliding control law based on a three degree of freedom plane vehicle model with differential braking. The simulation has performed using a full nonlinear 3-dimensional vehicle model and the performance of the controller has been compared to that of a direct yaw moment controller. Simulation results show that the proposed controller can provide a vehicle with better performance than conventional controller with respect to brake actuation without compromising stability at critical driving conditions.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.607-612
• /
• 2007

In this paper, operation mode of train was divided into powering, coasting, and braking and rail wear phenomenon has been done comparative analysis by each section. Data of train velocity is transferred to acceleration and deceleration from ATO Logging data. Amount of rail wear has been done comparative analysis by traction force of acceleration and braking force of deceleration and a plan for management of track irregularity is come up with by the result of the analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.126-134
• /
• 1998

본 연구에서는 회전운동을 제어하기 위한 새로운 작동기로서 전기장에 대하여 매우 빠른 응답특성을 갖고 있는 두 쌍의 실린더형 ER(electro-rheological) 클러치/브레이크 작동기를 제안하였다. 자체조성 된 ER유체의 빙햄특성 모델을 실험적으로 도출하였으며, 이와 연계한 작동기 모델을 구성하여 전기장에 따른 전달 및 제동 토크를 해석한 후 알맞은 크기의 클러치/브레이크 작동기를 제작하였다. 제작된 작동기의 동적특성(시상수 등)을 작동기 모델에 고려하기 위하여 계단입력 전기장에 따른 과도응답 실험을 클러치와 브레이크 모드에서 각각 수행하였다. 제안된 작동기의 응용성을 보이기 위하여 두쌍의 작동기로 구동되는 실험실 차원의 소형 와권식 세탁기 시스템을 구성한 후 동적지배방정식을 유도하다. 각 작동기와 연계된 PID제어기를 설계하여 세탁과 탈수시의 회전운동을 제어하였으며, 부하질량의 변화에 대한 작동기 시스템의 제어 효율성과 장시간 운전을 통한 제어 내구성 실험을 수행하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.425-431
• /
• 2011

Thermal energy generated because of the friction between the disc and pad is transferred to both sides and causes thermal expansion of the material, which affects the contact pressure distribution. This phenomenon, which is called thermoelastic instability (TEI), is affected by the natural mode of a disc. TEI results in the formation of a hot spot and causes hot judder vibrations. In this study, three-dimensional analysis of the hot judder of a ventilated disc for automotives was performed by using the commercial finite element analysis program, SAMCEF. The intermediate processor based on a staggered approach was used to exchange the result data of the mechanical and thermal model. The hot spot was formed on the surface of the disc, and the number of hot spots was compared with the natural mode of the disc.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.35-40
• /
• 2005

In the present study, the influence of operating conditions on fuel economy for hybrid electric vehicle was analyzed. In order to accomplish this, vehicle speed, engine speed, battery current and voltage, SOC (state of charge),motor speed and torque, generator speed and torque, engine coolant temperature etc. were measured in real time. The tests were carried out under different driving cycles which are urban and highway cycles, KOREA CITY cycle and on-road driving, and also under various operating conditions such as different initial SOC, with or without regenerative braking etc.. Generally, conventional gasoline engines show a poor fuel economy at stop and go driving, because braking energy is wasted and the engine is operated in low thermal efficiency regions. However, in case of hybrid vehicles, higher fuel economy can be obtained because of utilizing the maximum thermal efficiency regions of engine, idling stop of engine, and regenerative braking etc..

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.61-66
• /
• 2012

Conventional method to transform vehicle driving condition to engine operation mode is to use vehicle road load under neutral gear and mechanical efficiency of drivetrain. But this method requires additional measurement of efficiency of drivetrain on a test rig. And this measurement is normally done at fixed speed and thus estimated accuracy of engine operation mode is not considered to be high enough. This study suggests new method to calculate engine operation mode for prescribed driving mode such as NEDC using vehicle coastdown test under gear engaged condition without measurement of mechanical efficiency of drivetrain. Coastdown test was done under neutral and gear engaged condition for comparison and also trial to extract mechanical loss of drivetrain was carried out. Calculated engine torque by conventional and newly suggested method was compared with actually measured torque of a vehicle on a chassis dynamometer during NEDC. Newly suggested method showed slightly higher accuracy of accumulated brake work during NEDC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.583-594
• /
• 2006

WPANs (Wireless personal area networks) have developed as various forms according to requirements such as data rate, coverage, subscriber volume, and supported mobile velocity. And mobile device with multiple network interfaces is very common. To make these multi-mode devices communicate with any WPAN device at anytime, anywhere, the framework for heterogeneous wireless networks is essential. Therefore, we propose the integration framework to converge heterogeneous WPANs. In this paper, we explain the requirements and detailed design of our framework, and then present the emulation test results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.