• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.204-214
• /
• 2023

The occlusal treatment including prosthetic treatment should be considered when the pathologic symptom was observed with the excessive discrepancy between the centric relation occlusion (CRO) and the maximum intercuspal position (MIP). Through careful diagnosis, the malocclusion and interarch relationship can be analyzed, and occlusal adjustment, restorative treatment, orthodontic therapy, or orthognathic surgery can be performed depending on the degree of disharmony. The patient in this case report complained the unstable occlusion and loss of masticatory function that had been occurring for several years. At the time of the visit, the patient showed severe occlusal disharmony, with only the upper right second molar contacting the lower jaw at the maximum intercuspal position. Based on the analysis of the occlusion, it was difficult to solve the problem with just occlusal adjustment or restorative treatment. In addition, the patient had the skeletal class II malocclusion between the upper and lower jaws. Therefore, for resolving the severe skeletal class II malocclusion, pre- and post-orthodontic treatment, bilateral sagittal split ramus osteotomy (BSSRO) was performed. After that, the occlusal adjustment was performed for stable occlusion, and the missing teeth area was restored with dental implants. During the follow-up period, a periodic follow-up visits and additional occlusal adjustments were performed to achieve a stable centric occlusion and harmonious anterior and lateral guidance. As a result, the final prosthodontic treatment was completed, and the patient's masticatory function was restored.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.263-271
• /
• 2019

The recent phenomenon of job "Miss Match", which is inconsistent with knowledge in the demand of educational training institutes and industries, has spread to an increase in private education costs for reeducation and employment of new hires, resulting in weak individual job competency and poor employment capability, as well as economic and material waste at the national level. To compensate for these problems, the National Competency Standards(NCS), which are available immediately in practice and look for a standard point of national job competency with the aim of fostering human resources sought by industries, were developed, and even the NCS-based qualification system was launched in line with the stream of times. This study is intended to look into the importance and priority of competency units and competency unit elements at the NCS-based qualification L3 level in the skin care field for an overall check of the NCS-based qualification level at a time when educational institutes are organizing and operating the school curriculums according to the NCS and NCS-based qualification level. And it is attempted to provide basic data for the development of curriculum in fostering professional human resources required by industries. To analyze the needs for competency units and competency unit elements at the L3 level, a survey using AHP method was carried out to a group of field experts and a group of education experts. In addition, the SPSS(Statistical Package for Social Science) ver. 21.0 and Expert Choice 2000, an AHP-only solution was used to do statistical processing through the processes of data coding and data cleaning. The findings showed that there was a partial difference of opinion between a group of field experts and a group of education experts. This indicates that the inconsistencies between educational training institutes and industrial sites should be resolved at this time of change with the aim of fostering field customized human resources with professional skills. Consequently, the solution is to combine jobs at industrial sites and standardized educations of educational institutes with human resources required at industrial sites.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.111-128
• /
• 2020

Recently, in the process of globalization of companies, the use of third party logistics providers (3PL) has been strengthened. Therefore, the purpose of this study is to test the effectiveness of the logistics information system provided by 3PL companies. This study is to test the relationship between the effect of the characteristics of the 3PL logistics information system on the shipper's supply chain performance, that is, logistics performance, customer performance, and organizational performance, and the shipper's loyalty to the 3PL company, that is, 3PL corporate performance. In addition, long-term relationship orientation is to test whether there is a moderating effect between the shipper company and the 3PL company. Through this, this study aims to provide strategic implications for improving the competitiveness of 3PL companies. In this study, a total 205 data were collected and used for analysis of shippers companies for hypothesis testing, and analyzed using SPSS 21.0 and AMOS 21.0 statistical programs. The results of the study are summarized as follows. First, it was found that the accuracy, timeliness, and usefulness of the 3PL logistics information system all had a significant positive (+) effect on the performance of the shipper's supply chain. Second, it was found that the accuracy, timeliness, and usefulness of the 3PL logistics information system all had a significant positive (+) effect on 3PL corporate performance. Third, it was found that the performance of the supply chain of the shipper company had a significant positive (+) effect on the performance of the 3PL company. Finally, it was found that long-term relationship orientation had a moderating effect on the relationship between the performance of the shipper company's supply chain and the performance of the 3PL company. The purpose of this study is to provide academic and practical implications for securing competitive advantage through the logistics information system of 3PL logistics companies.

• Health Policy and Management
• /
• v.34 no.1
• /
• pp.78-86
• /
• 2024

Background: The purpose of this study was to determine the effectiveness of the specialty hospital system by comparing the medical use of inpatients who had artificial joint replacement surgery in specialty hospitals and non-specialty hospitals. Methods: This study utilized 2021-2022 healthcare benefit claims data provided by the Health Insurance Review and Assessment Service. The dependent variable is inpatient medical use which is measured in terms of charges per case and length of stay. The independent variable was whether the hospital was designated as a specialty hospital, and the control variables were patient-level variables (age, gender, insurer type, surgery type, and Charlson comorbidity index) and medical institution-level variables (establishment type, classification, location, number of orthopedic surgeons, and number of nurses). Results: The results of the multiple regression analysis between charges per case and whether a hospital is designated as a specialty hospital showed a statistically significant negative relationship between charges per case and whether a hospital is designated as a specialty hospital. This suggests a significant low in charges per case when a hospital is designated as a specialty hospital compared to a non-specialty hospital, indicating that there is a difference in medical use outcomes between specialty hospitals and non-specialty hospitals inpatients. Conclusion: The practical implications of this study are as follows. First, the criteria for designating specialty hospitals should be alleviated. In our study, the results show that specialty hospitals have significantly lower per-case costs than non-specialty hospitals. Despite the cost-effectiveness of specialty hospitals, the high barriers to be designated for specialty hospitals have gathered the specialty hospitals in metropolitan and major cities. To address the regional imbalance of specialty hospitals, it is believed that ease the criteria for designating specialty hospitals in non-metropolitan areas, such as introducing "semi-specialty hospitals (tentative name)," will lead to a reduction in health disparities between regions and reduce medical costs. Second, it is necessary to determine the appropriateness of the size of hospitals' medical staff. The study found that the number of orthopedic surgeons and nurses varied in charges per case. Therefore, it is believed that appropriately allocating hospital medical staff can maximize the cost-effectiveness of medical services and ultimately reduce medical costs.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.118-141
• /
• 2024

This study investigates and analyzes ancient literature records and iconographic materials to examine the Willow Tree Fence(樹柵) built on Gasan(假山) Cheonggyecheon(淸溪川) within the Hanyangdoseong, which was deliberately created to prevent flood damage during the Joseon Dynasty. Although there have been research cases related to the willow tree, it is difficult to find research conducted with the purpose of identifying its archetypal value by investigating and analyzing specific use cases of the willow tree and its historical background. Accordingly, this study aims to identify examples of the Willow Tree Fence(樹柵) created in Cheonggyecheon(淸溪川) during the Joseon Dynasty and reinterpret their value by illuminating the background of construction and regional characteristics. The main contents of this study are as follows. It is presumed that floods during the Joseon Dynasty were a great hazard. Between the 16th and 18th centuries, Joseon suffered severe damage from floods. By the time of King Yeongjo, all Four Mountains(四山) of the capital had become bare mountains, which was the cause of frequent floods. In the year of Gyeongjin(庚辰, the 26th year of King Yeongjo's reign, 1760), King Yeongjo dredged the channel bottom of Cheonggyecheon(淸溪川), which overflowed every rainy season, with the Juncheon Project(Channel-Dredging, 濬川事業) and planted willow trees on the mountain on both sides of the Ogan Water Gate(五間水門), as measures to prevent flood damage and soil loss. was implemented. In the <Doseongdo(都城圖)> in 《 Gwangyeodo(廣輿圖)》 produced in the mid-18th century during the reign of King Yeongjo, Gasan(假山), built in front of the Ogan Water Gate(五間水門) is visible, and in the record 『Sinjeung Donggukyeoji Seungnam(新增東國輿地勝)』 In the record, it appears that willows were planted on both sides of the mountain in the year of Gyeongjin(1760). With <Hanyangdoseong Map(漢陽都城圖)> produced in the 46th year of King Yeongjo's reign(1770), it is confirmed that willow trees formed a thick forest on Gasan Mountain near the Ogan Water Gate(五間水門) in the late 18th century. In addition, the Juncheon Project(Channel-Dredging, 濬川事業) and the creation of the Willow Tree Fence(樹柵) continued from the 15th century, the early Joseon Dynasty(朝鮮前期), to the end of the 19th century, the late Joseon Dynasty(朝鮮後期), through the records of ancient literature such as 『Annals of the Joseon Dynasty(朝鮮王朝實錄)』, 『Seungjeongwon Diary(承政院日記)』, and 『Records of Daily Reflections(日省錄)』. This study is meaningful in informing that the willow tree was a unique cultural heritage and traditional landscape resource by investigating the composition and use of the Willow Tree Fence in the Joseon Dynasty, which was a great basis for preventing floods and flood damage, as well as forming a beautiful landscape.

• Journal of Environmental Impact Assessment
• /
• v.33 no.1
• /
• pp.30-41
• /
• 2024

The way we work is changing significantly with the rapid development of digitaltechnology, and paper documents are being replaced by electronic documents. However, in accordance with the Enforcement Decree and Enforcement Regulation of the Environmental Impact Assessment Act, the environmental impact assessment report must submit a set number of paper reports to organizations related to the project, and about 42 years have passed since it was submitted as a paperreport. In 2022, the National Institute of Ecology introduced a system to review paperreports as electronic documents in line with the trend of digital transformation. The cost reduction and carbon emission reduction effects of electronic document review were analyzed for 1,398 environmental impact assessments submitted and reviewed in 2022. In addition, a satisfaction survey was conducted targeting type 1 environmental impact assessment companies that were directly affected, and a total of 134 people responded. As a result of analyzing the effect of reviewing electronic documents, costs are reduced by a total of 101,424,900 won per year and carbon emissions are reduced by about 59.7 tons. As a result of the satisfaction survey, 94.8% of the respondents said electronic documentreview was very helpful, and 4.5% said it was helpful. The effectiveness of electronic documentreview was high, with 94.8% of respondents saying it was helpful in economic terms and 91.8% saying it was helpful in reducing work hours. If electronic documents are reviewed through the revisions to the Enforcement Decree and Enforcement Regulation of the Environmental Impact Assessment Act, the implementation of electronic document review is expected to have a ripple effect across the country, not only reducing costs and carbon emissions, but also reducing administrative time and saving storage space. Rapid changes in law and administration are needed to adapt to the digital transformation era.

• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.365-378
• /
• 2020

Purpose This study was performed to determine whether the T1 relaxation time of gadoxetic acid-enhanced liver MR imaging is useful for detecting and staging liver fibrosis in patients with chronic liver disease. Materials and Methods One hundred and three patients with suspected focal liver lesion underwent MR imaging and Fibroscan. Fibroscan was chosen as the reference standard for classifying liver fibrosis. T1 relaxation times were acquired before (preT1), 20 minutes after (postT1) contrast administration, and reduction rate of T1 relaxation time (rrT1) on transverse 3D VIBE (volumetric interpolated breath-hold examination) sequence using 3T MR imaging. The optimal cut-off values for the fibrosis staging were determined with ROC analysis. Results PreT1 and postT1 increased and rrT1 decreased constantly with increasing severity of liver fibrosis according to the METAVIR score (F0-F4). There were statistically significant differences between F2 and F3 in preT1 (F2, 836.0 ± 74.7 ms; F3, 888.6 ± 77.5 ms, p < 0.05) and between F3 and F4 in postT1 (F3, 309.0 ± 80.2 ms; F4, 406.6 ± 147.7 ms, p < 0.05) and rrT1 (F3, 65.4 ± 7.7%; F4, 57.3 ± 11.4%, p < 0.05). ROC analysis revealed that combination test (preT1 + postT1) was the best test for predicting liver fibrosis. Conclusion PreT1 and postT1 increased constantly with increasing severity of liver fibrosis. T1 mapping in gadoxetic acid-enhanced liver MR imaging could be a helpful complementary sequence to determine the liver fibrosis stage.

• Korean Journal of Poultry Science
• /
• v.51 no.2
• /
• pp.83-95
• /
• 2024

This study aimed to assess the performance of laying hens across twelve crossbreed strains (i.e., CFCK, CFYC, CFYD, CKCF, CKYC, CKYD, YCYD, YCCF, YCCK, YDCF, YDCK, and YDYC) of Korean native chicken (KNC) and compare them with Hy-Line Brown layers. A total of 287 18-week-old laying hens were placed in battery cages by strains (2-5 birds per pen). Results indicated that the YCYD and YDYC strains exhibited numerically heavier body weights than Hy-Line Brown at week 18-64. CKYC and YDYC strains demonstrated more than 94% viability by week 64. The CFYC strain had an age of first egg laying of 127 days, and the YDCF strain reached an age of 50% egg production at 140 days, both earlier than their parent stock. The YDCF strain showed over 70% egg production for up to 60 weeks. Regarding egg quality, the CKCF and YCCF strains had numerically higher egg weights among the KNC groups at week 24-64, with the YDYC strain showing a darker (P<0.05) eggshell color compared to CKCF at week 40. Moreover, KNC crossbreeds showed a higher (P<0.05) egg yolk ratio than Hy-Line Brown. In conclusion, the YDCF and YCCF crossbreeds exhibited the most desirable new synthetic Korean native commercial layer based on egg production and quality parameters. Therefore, these strains could be a viable substitute for Hy-Line Brown layers.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.