• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.16-25
• /
• 1995

The effects of leaf removal time on variation of nodal sink components in determinated soybean ［Glycine max （L.） Merr.］ cultivar 'Danyeobkong' were measured at the experiment field of Chonbuk Provincial Rural Development Administration in 1991. Node order in this experiment was calculated from terminal node to bottom node to clarify the photosynthetic ability of canopy leaves. The upper 5 leaves from terminal node of main stem were removed at 5, 15, 25, 35 and 45 days after flowering(DAF) respectively. In spite of light-receiving increment in lower part of main stem and in branch by removing the upper part leaves of main stem, seed weight of that part was not increased in leaf removal treatment compared with control block. The node position reducing pod went down from terminal to bottom by delaying leaf removal time, and the influence of pod number reduction was bigger in DAF 25 than in DAF 15. But the seed number reduction per pod was the biggest in DAF 35. Cracked seed coat ratio ranged from 25% to 35% in control block, while that of leaf removal block had mostly 10% gap compared with the control block.rol block.

• Current Research on Agriculture and Life Sciences
• /
• v.21
• /
• pp.17-21
• /
• 2003

This study aimed to identify leaf sheath function through the investigation of effect of removal times and removed number of leaf sheath on growth and flowering in gladiolus. The leaf sheath influenced on the growth and flowering regardless of light condition at early growth stages. When total leaf sheath were removed in early growth stages, flower stalk length and spike length remarkably decreased. Whereas days of flowering were little different by leaf sheath removal. Also when removed numbers of leaf sheath were 1, 2 and 3, the growth and flowering were little different compared to control. But when removed numbers of leaf sheath were 4, flower stalk length decreased above 25cm compared to others treatment, spike length and number of flower decreased and stem diameter became thick abnormally.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.3
• /
• pp.193-197
• /
• 1998

This experiment was carried out to determine the proper time for flower bud removing to improve growth, yield and paeoniflorin content of root in peony(Paeonia lactiflora Pallas). The flower buds removement caused short stem length by $7{\sim}9cm$ compared with control, but number of stem and stem diameter were similar to that of control. The number of root, fresh root weight and paeoniflorin content in peony increased when their flower buds were removed at earlier stages. The root dry weight was highest of 1.647kg/10a, and increased by 27% compared with control when their flower buds were removed at early stage (bud diameter was less than 10mm). The root dry weight increased by 13% and 10%, respectively. when their flower buds were removed prior to flowering and at flowering stage. Paeoniflorin content in leaf was higher than that in stem, and was higher at early stage. Leaf and stem showed higher paeonif1orin content when their flower buds were removed.

• 대한관절경학회:학술대회논문집
• /
• 2009.10a
• /
• pp.74-74
• /
• 2009

• KSBB Journal
• /
• v.13 no.4
• /
• pp.404-410
• /
• 1998

Three types of adsorbents were developed by immobilizing synthetic zeolite, Philipsite-Gismonine, in alginate, cellulose acetate and dialysis membrane for the in situ removal of ammonium ion which inhibits growth and productivity of animal cells such as CHO cells producing tPA. Ammonium ion removal efficiency and cell growth promoting effect with various immobilized adsorbents were evaluated and the membrane type was selected as an optimal immobilized adsorbent. The experiments were then simulated by adding 8mM ammonium chloride and immobilized adsorbent in order to validate the removal effect under high density cell cultures. The results showed increase in maximum cell density by three times, in cell viability, and in tPA productivity by 40%. And it was found that the promoting effects were more significant in case of high ammonium ion concentration system. It was also found that the optimum addition time for immobilized adsorbents was 48 hr in the absence of ammonium chloride addition and 72 hr in the presence of ammonium chloride addition.

• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.236-240
• /
• 2016

Weeding measures is an important issue for cereal crop because weed is superior to crops in early growth stage and there are not many herbicides applicable to cereal crop. Since the concern about well-being and eco-environmental products are increasing, cultivation with polyvinyl chloride (PVC) is needed. Five treatments included as weed-free, control (not remove weed) and covering with polyvinyl chloride removed 20, 30, 40 DAS (day after seeding). At removing PVC, plant height did not differ depending on the growth stage. However, weed-free plot by weed competition were somewhat short. And, removing PVC accelerated the earlier by 2-3 day than weed-free plot. Soil moisture which removed from the control was higher than 20, 30, 40 DAS and weed-free, and it was kept low by evaporation. The chlorophyll meter of weed-free plot was 34.3, 30 DAS was 40.6 at heading time. Weed-free showed that increased in weed population $300.8g\;m^{-2}$. Weed control value of 20 DAS, 30 DAS, 40 DAS were 86.5%, 84.0% and 74.8%, respectively. In 30 DAS, yield of foxtail millet according to treatment of removing PVC were $355kg\;10a^{-1}$. At weed competition early in 30 DAS, the removing PVC was good for control. Thus, 30 DAS was judged to be suitable.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.176-178
• /
• 2011

본 연구에서는 소프트웨어 제품을 개발하여 테스팅을 거친 후 사용자에게 인도하는 시기를 결정하는 방출문제에 대하여 연구되었다. 인도시기에 관한 모형은 무한 고장수에 의존하는 비동질적인 포아송 과정을 적용하였다. 이러한 포아송 과정은 소프트웨어의 결함을 제거하거나 수정 작업 중에도 새로운 결함이 발생될 가능성을 반영하는 모형이다. 강도함수는 로그-로지스틱 패턴을 이용하였다. 따라서 소프트웨어 요구 신뢰도를 만족시키고 소프트웨어 개발 및 유지 총비용을 최소화 시키는 방출시간이 최적 소프트웨어 방출 정책이 된다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.179-181
• /
• 2011

본 연구에서는 소프트웨어 제품을 개발하여 테스팅을 거친 후 사용자에게 인도하는 시기를 결정하는 방출문제에 대하여 연구되었다. 인도시기에 관한 모형은 무한 고장수에 의존하는 비동질적인 포아송 과정을 적용하였다. 이러한 포아송 과정은 소프트웨어의 결함을 제거하거나 수정 작업 중에도 새로운 결함이 발생될 가능성을 반영하는 모형이다. 강도함수는 중첩 패턴을 이용하였다. 따라서 소프트웨어 요구 신뢰도를 만족시키고 소프트웨어 개발 및 유지 총비용을 최소화 시키는 방출시간이 최적 소프트웨어 방출 정책이 된다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1993.10a
• /
• pp.52-53
• /
• 1993

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.87-94
• /
• 2003

Construction plan and strength control have limitations in construction production field because it is difficult to predict the form removal strength and development of specified concrete strength. However, we can have reasonable construction plan and strength control if prediction of concrete strength is available. In this study, firstly, the newly proposed strength prediction model with maturity method was compared with the logistic model to test the adaptability. Secondly, the determination of time of form removal was verified through the new strength prediction model. As the results, it is found that investigation of the activation energy that are used to calculate equivalent age is necessary, and new strength prediction model was proved to be more accurate in the strength prediction than logistic model in the early age. Moreover, the use of new model was more reasonable because it has low SSE and high decisive factor. If we adopt new strength prediction model at construction field, we can expect the reduced period of work through the reduced time of form removal.