• Title/Summary/Keyword: 정체관리

Search Result 251, Processing Time 0.023 seconds

The Effects of Winch-curtain Ventilation on the Indoor Environment of a Fattening Swine House (윈치커튼 환기가 비육돈사의 실내 환경에 미치는 영향)

  • Kim, Hyeon-Tae;Song, Jun-Ik;Choi, Hong-Lim
    • Journal of Animal Environmental Science
    • /
    • v.18 no.1
    • /
    • pp.1-8
    • /
    • 2012
  • The study was conducted to investigate the effects of climate on indoor environment of a swine house with natural. This study was tested in the beef swine stall at Young-in, Kyung-ki do. The test was experimented for the effect of interior environment by the outdoor environment and the interior-pan. The results are as follows. 1. In test 1 ($T_{out}$ : $25.7^{\circ}C$, without fan), an indoor air flow pattern was showed that entered from sidewall winch-curtain to went out of a indoor by the ridge winch-curtain. And the velocity of a section of the center was measured two times as large as the velocity of the floor. It is the acceleration of the velocity by thermal buoyancy. And, the entered air was rapidly dissipated by flow energy. So that in the swain livestock with sidewall winch-curtain is effected by thermal buoyancy. And the air temperature of the indoor was distributed more higher as compared with the outdoor temperature. This result is caused by the sensible heat from swine and the ventilation is restricted. 2. In test 2 (($T_{out}$ : $25.7^{\circ}C$, with fan), the velocity of a section of the center was measured more higher as compared with the test 1. And the variance of air velocity was distributed higher as compared with the test 1. This result is showed dead region of air flow with a fan operation. And, the variance of gas density was distributed lower as compared with the test 1.

Research Direction for Functional Foods Safety (건강기능식품 안전관리 연구방향)

  • Jung, Ki-Hwa
    • Journal of Food Hygiene and Safety
    • /
    • v.25 no.4
    • /
    • pp.410-417
    • /
    • 2010
  • Various functional foods, marketing health and functional effects, have been distributed in the market. These products, being in forms of foods, tablets, and capsules, are likely to be mistaken as drugs. In addition, non-experts may sell these as foods, or use these for therapy. Efforts for creating health food regulations or building regulatory system for improving the current status of functional foods have been made, but these have not been communicated to consumers yet. As a result, problems of circulating functional foods for therapy or adding illegal medical to such products have persisted, which has become worse by internet media. The cause of this problem can be categorized into (1) product itself and (2) its use, but in either case, one possible cause is lack of communications with consumers. Potential problems that can be caused by functional foods include illegal substances, hazardous substances, allergic reactions, considerations when administered to patients, drug interactions, ingredients with purity or concentrations too low to be detected, products with metabolic activations, health risks from over- or under-dose of vitamin and minerals, and products with alkaloids. (Journal of Health Science, 56, Supplement (2010)). The reason why side effects related to functional foods have been increasing is that under-qualified functional food companies are exaggerating the functionality for marketing purposes. KFDA has been informing consumers, through its web pages, to address the above mentioned issues related to functional foods, but there still is room for improvement, to promote proper use of functional foods and avoid drug interactions. Specifically, to address these issues, institutionalizing to collect information on approved products and their side effects, settling reevaluation systems, and standardizing preclinical tests and clinical tests are becoming urgent. Also to provide crucial information, unified database systems, seamlessly aggregating heterogeneous data in different domains, with user interfaces enabling effective one-stop search, are crucial.

Early Responses of Planted Quercus serrata Seedlings and Understory Vegetation to Artificial Gap Treatments in Black Locust Plantation (아까시나무림에서 인공 숲틈 처리에 대한 졸참나무 식재목 및 하층식생의 초기 반응)

  • Cho, Yong-Chan;Kim, Jun-Soo;Lee, Jung-Hyo;Lee, Heon-Ho;Ma, Ho-Seob;Lee, Chang-Seok;Cho, Hyun-Je;Bae, Kwan-Ho
    • Journal of Korean Society of Forest Science
    • /
    • v.98 no.1
    • /
    • pp.94-105
    • /
    • 2009
  • Black locust (Robinia pseudoacacia) stand is representative lowland exotic plantation with low ecological quality and arrested succession in South Korea. To facilitate succession and restore natural vegetation, small canopy gaps (${\sim}57m^2$), which can modify minimally structural variables and reduce restoration related disturbances on stand, was established in the black locust stand, and oak (Quercus serrata) seedlings were introduced in the gap. Two types of varying levels were introduced for gap creation; cutting (C) and girdling (G) on canopies. Understory removal (CU and GU) treatment was applied as subtypes of structural modification. Growth (diameter, height and leaf area) of target species and responses (species composition, diversity and coverage) of understory community were monitored during study years (2007~2008). Canopy openness was different significantly among treatments but not for light availability. Based on the result of logistic regression, growth of height and leaf area of seedlings were significant variables on seedling survival. Height and leaf area of seedlings were increased during study years, although radial growth was reduced. During study years, there were no significant differences in species composition and diversity, and total coverage increased about 20%. Increase of resources by gap creation and understory removal likely affect growth of target species. Small gap creation was effective to reduce understory responses in composition and diverstiy. Synthesized, growth of target species and responses of understory community to small canopy gap creation exhibited, in short term, possibility of utilization in alternative forest restoration and management option. Long-term monitoring is necessary to certificate effect of artificial gap creation on forest restoration.

Unit Loadings of Heavy Metals by Non-point Sources - Case Study in a Valley Watershed - (비점원에 의한 중금속 원단위 부하량 - 곡간지 유역을 중심으로 -)

  • Kim, Jin-Ho;Han, Kuk-Heon;Lee, Jong-Sik
    • Korean Journal of Environmental Agriculture
    • /
    • v.27 no.1
    • /
    • pp.35-43
    • /
    • 2008
  • The study was carried out to estimate runoff loads of heavy metals in the valley watershed at the middle of South Korea, during farming season. There were no other pollution sources except agricultural activity. From 27 April 2006 to 31 October 2007, water samples were collected using two methods. The first method was regular sampling wherein water samples were taken every two weeks; and the other method was through regular sampling when water were collected during each rainfall event. Results showed that heavy metals were found in the water from the regular samples, and were highest during May and June. It was presumed that this might have been contributed by farming activities. Heavy metal concentration of the irregular samples was lower than regular samples. The correlation coefficient between each heavy metal of the regular samples were as follows: Fe-Al>Cr-Al>Fe-Cr>Mn-Fe. The correlation coefficient of the irregular samples were the following: Fe-Al>Fe-Cu is positive; and Pb-Cu>Ni-Al is negative. Measured pollutant loads of heavy metals in the valley watershed were : 2.047 kg $day^{-1}$ of Al, 0.008 kg $day^{-1}$ of Cd, 0.034 kg $day^{-1}$ of Cr, 0.311 kg $day^{-1}$ of Cu, 0.601 kg $day^{-1}$ of Fe, and 0.282 kg $day^{-1}$ of Zn in 2006; while in 2007, the following were observed: 2.535 kg $day^{-1}$ of Al, 0.026 kg $day^{-1}$ of Cd, 0.055 kg $day^{-1}$ of Cu, 0.727 kg $day^{-1}$ of Fe, and 0.317 kg $day^{-1}$ of Zn. In the analysis of data gathered, the loading rates of effluents from the valley watershed during the rainy season were : 79.8% of Al, 69.1% of Cu, 82.5% of Fe, and 69.1% of Zn in 2006; while 69.9% of Al, 67.5% of Cu, 70.4% of Fe, and 67.5% of Zn in 2007.

Current Statues of Phenomics and its Application for Crop Improvement: Imaging Systems for High-throughput Screening (작물육종 효율 극대화를 위한 피노믹스(phenomics) 연구동향: 화상기술을 이용한 식물 표현형 분석을 중심으로)

  • Lee, Seong-Kon;Kwon, Tack-Ryoun;Suh, Eun-Jung;Bae, Shin-Chul
    • Korean Journal of Breeding Science
    • /
    • v.43 no.4
    • /
    • pp.233-240
    • /
    • 2011
  • Food security has been a main global issue due to climate changes and growing world population expected to 9 billion by 2050. While biodiversity is becoming more highlight, breeders are confronting shortage of various genetic materials needed for new variety to tackle food shortage challenge. Though biotechnology is still under debate on potential risk to human and environment, it is considered as one of alternative tools to address food supply issue for its potential to create a number of variations in genetic resource. The new technology, phenomics, is developing to improve efficiency of crop improvement. Phenomics is concerned with the measurement of phenomes which are the physical, morphological, physiological and/or biochemical traits of organisms as they change in response to genetic mutation and environmental influences. It can be served to provide better understanding of phenotypes at whole plant. For last decades, high-throughput screening (HTS) systems have been developed to measure phenomes, rapidly and quantitatively. Imaging technology such as thermal and chlorophyll fluorescence imaging systems is an area of HTS which has been used in agriculture. In this article, we review the current statues of high-throughput screening system in phenomics and its application for crop improvement.

Water Quality Monitoring of the Ecological Pond Constructed by LID Technique in Idle Space (유휴 공간에 LID 기법을 활용한 생태연못의 수질 모니터링)

  • Ahn, Chang-Hyuk;Song, Ho-Myeon;Park, Joon-Ha;Park, Jum-Ok;Park, Jae-Roh
    • Journal of Environmental Impact Assessment
    • /
    • v.27 no.6
    • /
    • pp.674-684
    • /
    • 2018
  • The purpose of this study is to construct ecological pond using LID technique in order to create naturally comfortable community space in urban idle space. The specification of the ecological pond is $110m^2$ of surface area, $0.45{\pm}0.02m$ of average depth, and bed material is composed of gravel (diameter ${\leq}60mm$), sand (diameter ${\leq}2mm$) and bentonite. Rainfall and water depth monitoring were conducted to determine the annual characteristics of inflow of the water for the ecological pond, result of total rainfall was 1,287 mm and showed a seasonal imbalance that accounted for 71.3% (918 mm) during July to August, but the annual mean water depth was kept constant at $0.45{\pm}0.02m$ due to the secondary water source. Annual trends of basic water quality showed a significant changes according to the season, such as water temperature ($5.2{\sim}28.8^{\circ}C$), DO (5.0 ~ 13.8 mg/L), EC ($113{\sim}265{\mu}S/cm$). BOD, COD, TN, and TP in physicochemical water quality tended to increase after October, but the ion parameters such as $NH_3$ and $PO_4{^{3-}}$ were generally low. Phytoplankton indicators Chl-a and BGA (blue green algae) showed a sharp increase from July to August, and green algae (Selenastrum bibraianum, Pediastrum boryanum etc.) and filamentous blue green algae (Phormidium sp.) emerged as a dominant species. The ion parameters ($F^-$, $Na^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were strongly correlated with the $Cl^-$ as a conservative substance (R=0.70~0.97, p<0.05). Water quality was influenced by the ambient environment such as seasonal changes or rainfall, and it was closely related to fluctuation of the inflow of the water. In the future, it is necessary to consider ecological connections by referring to the characteristics surveyed in this study in order to effectively manage the water quality and biodiversity of the ecological pond in idle space.

Thermal Behavior and Leaf Temperature in a High Pressure Sodium Lamp Supplemented Greenhouse (고압나트륨등 보광 온실의 열적 거동 및 엽온 분석)

  • Seungri Yoon;Jin Hyun Kim;Minju Shin;Dongpil Kim;Ji Wong Bang;Ho Jeong Jeong;Tae In Ahn
    • Journal of Bio-Environment Control
    • /
    • v.32 no.1
    • /
    • pp.48-56
    • /
    • 2023
  • High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

Mitigation Effect on Airborne Particulate Matter Concentration by Roadside Green Space Type and Impact of Wind Speed (도로변 녹지 유형별 미세먼지 농도 저감 효과와 이에 대한 풍속의 영향 연구)

  • Tae-Young Choi;Da-In Kang;Jaegyu Cha
    • Journal of Environmental Impact Assessment
    • /
    • v.32 no.6
    • /
    • pp.437-449
    • /
    • 2023
  • This study measured PM10 concentrations and wind speeds in buffer green spaces and neighborhood parks located along the road, and compared them with roadside measurementresults to understand the effect of mitigating PM10 concentrations by type of green space and the influence of wind speeds on it. As a result of the analysis, the effect of mitigating PM10 concentration was different depending on the type of roadside green space, and an increase in wind speed had a significant effect on reducing PM10 concentration. In buffer green areas with high planting density, wind speed was low and PM10 stagnated inside, resulting in the highest concentration. On the other hand, green areas in neighborhood parks with relatively low planting density had high wind speeds and the lowest PM10 concentration. The non-green area within the neighborhood park recorded the highest wind speed, which was advantageous for the spread of PM10, but the concentration was higherthan that of the green area. Therefore, in orderto reduce PM10 concentration in roadside green space, it is necessary to create green space with good ventilation, and the combined effect of green space and wind speed seems to be more advantageous in reducing PM10 concentration. Green spaces capture and remove PM inside, contributing to reducing the concentration of PM outside. In order to manage PM in the entire city and on roads, it is necessary to increase planting density and leaf area in roadside green spaces, such as buffer green spaces, so that PM can be removed within the green spaces. However, in green spaces such as neighborhood parks that are actively used by city residents, in orderto minimize damage to users due to PM, it is desirable to create green spaces with a structure that allows PM to spread to the outside rather than stagnate inside.

A Study on the Effectiveness of Government Start-up Support Project Satisfaction and Business Capabilities by Start-up Growth Stage (창업성장단계별 정부의 창업지원사업 만족도와 창업가의 사업화역량의 효과에 관한 연구)

  • Yoon, Bok-man;Jang, Young-hye
    • Journal of Venture Innovation
    • /
    • v.7 no.3
    • /
    • pp.65-84
    • /
    • 2024
  • This study confirms the relative influence of satisfaction with the government's start-up support project at each growth stage of start-up companies and entrepreneurs' commercialization capabilities on start-up commitment. The start-up growth stage was divided into start-up stage, initial growth stage, stagnation stage, and high growth stage, and the government's start-up support project was divided into eight types(entrepreneurship education, mentoring/consulting, facility space, commercialization support, policy funds, sales channels/marketing/overseas expansion, R&D support, and start-up events/network) and satisfaction was evaluated. The data used was the results of the Daegu Creative Economy Innovation Center's survey on entrepreneurship conditions. As a result of the analysis, it was confirmed that the entrepreneur's commercialization capabilities are more effective in increasing the entrepreneur's commitment to starting a business than the satisfaction with the government's start-up support project. Additionally, it was confirmed that relatively important factors in entrepreneurship immersion differ depending on the start-up stage. During the start-up period, the government's start-up support project was found to be an important factor in increasing entrepreneurs' commitment to starting a business, but it was confirmed that the government's start-up support project had no effect on the start-up commitment after the start-up growth stage. In addition, this study confirmed the relatively important government start-up support projects by start-up growth stage and found that satisfaction with start-up facilities can increase start-up commitment during the start-up stage, and that start-up facilities and commercialization support are important during the early growth stage. And in the Death Valley stage, startup facilities, commercialization support, and policy funds were confirmed to be relatively important factors, and in the high growth stage, mentoring was confirmed to be an important factor in increasing entrepreneurship immersion. The results of this study not only contribute theoretically to building entrepreneurship theory, but also determine the size and effective support plan for the government's entrepreneurship support project for each growth stage of startup companies, and help organizations that operate entrepreneurship policy and institutional support and startup support programs. It will have a significant contribution to management measures.

A Study on the Development and Validation of Three Systems of Action Scale in Home Economics for Middle and High School Students (중⋅고등학생용 가정교과 세 행동체계 척도 개발 및 타당화 연구)

  • Choi, Seong Youn
    • Journal of Korean Home Economics Education Association
    • /
    • v.35 no.3
    • /
    • pp.67-96
    • /
    • 2023
  • The purpose of this study was to develop and validate a scale that can grasp the reality of the three systems of action for middle and high school students in home economics. For this purpose, a total of 105 questions, 35 questions for each systems of action, were developed as a 5-point Likert scale in order to measure technical action, communicative action, and emancipative action as preliminary questions by reviewing domestic and international literature related to the three systems of action. The procedure for revising and supplementing the developed preliminary questions by reviewing the content validity of the home economics education expert was executed twice. A preliminary survey was conducted on middle and high school students with 70 developed preliminary questions, and 166 copies were collected. As a result of exploratory factor analysis of the collected questionnaires to test the validity of the scale, it was found that 38 questions 7 factors were appropriate. After constructing this survey based on the results of exploratory factor analysis, this survey was conducted on middle and high school students, and 548 copies were collected and a confirmatory factor analysis was performed. A total of 38 questions were finally selected through confirmatory factor analysis, including basic living ability 5 questions, self-management ability 4 questions, information processing ability 4 questions, communication/interpersonal ability 12 questions, critical thinking ability 3 questions, decision-making ability 7 questions, empowerment 3 questions. The Model Fit was χ2=1846.741(p<.001), CFI=0.865, TLI=0.853, RMSEA=0.058, and the Standardized Regression Weights for each question was more than 0.5, so it can be seen as a suitable measurement instrument for measuring the status of the three systems of action of middle and high school students in home economics. The three systems of action scales were found to have significant correlations with self-acceptance, future planning, intimacy, uniqueness, which are sub-factors of the self-identity scale, and social participation scales therefore confirmed that they have recognized concurrent validity.