• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.697-702
• /
• 1996

원전 배관계통에 LBB를 적용하면 배관파단으로 인한 동적영향(dynamic effect)을 고려하지 않아도 되므로 각종 구조물의 설계가 단순해지고, 배관파단에 대비해 설치하였던 각종 지지구조물들을 제거할 수 있으므로 설계비용 절감 등 경제적 이점을 얻을 수 있다. 본 논문의 목적은 차세대원전 안전주입 및 정지냉각계통 배관에 대해 설계초기단계에서 LBB적용 여부를 판단할 수 있는 배관평가선도를 개발하는 것이다. 이를 위해 먼저 배관재료의 응력-변형률곡선을 사용하여 감지가능한 균열길이를 산출하였으며, 3차원 유한요소해석과 배관재료의 파괴저항곡선을 이용한 균열안정성평가를 수행하여 배관평가선도를 개발하였다. 본 연구에서 개발한 배관평가선도를 배관설계초기단계에 사용하면 LBB적용여부로 인한 설계변경과정이 불필요하므로 전체공기를 단축할 수 있으며, 특정한 배관계통이 아닌 일반 배관계통에 적용할 수 있으므로 LBB해석회수를 상당히 줄일 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.31-32
• /
• 2019

본 논문에서는 Microsoft Azure 기반의 운동 방법 안내 챗봇을 설계하고 구현한다. 이 챗봇은 자동 추천과 부위 선택 기능을 제공한다. 자동 추천은 본 프로그램을 처음 접하거나 편리하게 사용하고 싶은 사용자에게 권장하는 기능을 제공한다. 이 챗봇은 사용자에게 맞춤 운동법을 효과적으로 제시하기 위해 키, 몸무게, 나이, 성별 같은 사용자 정보를 입력시킨다. 그리고 운동 부위 선택 기능은 사용자가 운동하고 싶은 특정 부위를 명확하게 인식하고 있을 때 사용한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1303-1306
• /
• 2009

수중에서의 통신은 해수면과 해저면 등에 의한 신호의 반사에 의해 발생한 다중경로 현상으로 신호가 왜곡되어 원활한 통신이 어렵다. 이에 본 논문에서는 다중경로에 의해 발생한 오류를 정정하고자 수중 채널 전달함수를 이용한 정정기법을 제안하였으며, 시뮬레이션 결과 제안한 기법을 적용하였을 경우 적용하지 않았을 때 보다 더욱 우수한 성능을 보이는 것을 확인 할 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1281-1284
• /
• 2009

무선통신에서는 다양한 서비스, 높은 신뢰도와 함께 빠른 전송속도를 요구한다. 이러한 요구를 만족시키기 위해서 LDPC 부호와 MIMO 기술이 활발히 연구 중에 있다. 본 논문에서는 LDPC와 결합된 STC 모델을 설명하고, 여러개의 송신안테나로부터 송신되어 결합된 신호를 분리하기 위해 사용되는 Log-Likelihood Computation을 기존의 방식과 제안하는 저 계산량 알고리즘을 통한 방식을 비교, 분석하여 기존의 방식과 근접한 BER 성능을 유지 하면서 계산량 감소를 확인한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.625-628
• /
• 2020

특별관리임산물의 관리·감독을 위하여 법률을 바탕으로 품질관리제도를 마련하고 있으며, 현재 문서를 통해 관리하고 제도적인 신뢰에 의존하는 방식에 머물러 있다. 이는 많은 비용을 발생시키며, 제도를 악용하는 사기 사례가 발생하고 있다. 본 연구에서는 문제점을 해결하기 위해 블록체인을 이용한 특별관리임산물 품질관리 시스템을 제안한다. 해당 시스템은 품질 관리를 위한 문서를 법률에 따른 양식에 따라 전자문서로 생성하고, 문서 정보를 분산장부에 저장하여 누구나 확인 할 수 있도록 한다. 전자 문서들은 기관의 데이터베이스에 보관하여 확인 할 수 있도록 하며, 분산장부의 문서 정보 등록 이력을 통해 품질관리 이력을 추적하고 검증할 수 있도록 한다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.6
• /
• pp.327-333
• /
• 2023

Existing studies on the UAV (Unmanned Aerial Vehicle)-based CPS (Cyber Physical System) environment lack forest fire monitoring and forest fire reconnaissance using real-world UAVs. So, it is necessary to monitor forest fires early through CPS based on real-world UAVs with high reliability and resource management efficiency. In this paper presents an MFG (Misstion File Generater) that automatically generates a flight path of an UAV for forest fire monitoring in a CPS environment. MFG generates flight paths based on a hiking trail with a high fire probability due to a true story of an entrant. We have confirmed that the flight path generated by MFG can be applied to the UAV. Also, we have verified that the UAV flies according to the flight path generated by MFG in simulation, with a negligible error rate.

• Journal of Korean Society for Geospatial Information Science
• /
• v.9 no.1 s.17
• /
• pp.39-47
• /
• 2001

DTM(Digital Terrain Model) can play a key rule in a great number of the fields of construction Engineering. One of the most important application fields is to determine volume in that the total construction expenses is usually calculated through this. It therefore is necessary to the study on improving the precise of the determination using DTM on account of saving time and cost. On this study, 1:5000 topographic maps issued by NGI in 15 districts involved in Pusan city was digitalized to generate DTM at first. After this step, not only was the determination of the volume as well as readjusted area and height done for the sake of estimating the changable topography caused by cut & fill volume in future but also provided the model to calculate it as results. In addition, comparison among the interpolations, such as Inverse Distance Method and Nearest Neighbor, was respectively done to look over the differences of the volume estimated from each interpolation and also to find the most suitable method. As a result, the former yielded the largest values of area and the volume while the latter gave the smallest ones. Moreover, the values estimated on this study were closely similar to ones obtained by the government of Pusan.

• Korean Journal of Cognitive Science
• /
• v.14 no.3
• /
• pp.1-11
• /
• 2003

Two experiments were conducted to investigate effects of target types and retinal eccentricity on the search of a target while both target and background stimuli were static or moving. A visual search task was used in both experiments. The retinal eccentricity was determined by five concentric circles increasing by the unit of 1.6 and the target was different from the background stimuli in either orientation(orientation target) or a distinctive feature(feature target). In Experiment 1 where both the target and background stimuli were presented statically, an interaction between retinal eccentricity arid target type was found. While search time of the orientation target was not affected by the retinal eccentricity, that of the feature target increased as the retinal eccentricity increased. In Experiment 2 where all stimuli were moving, the interaction effect was also found. But the reason was not the same as that in Experiment 1. In the moving condition, while the search time of the orientation target decreased consistently as the retinal eccentricity increased, that of the feature target was not affected by the retinal eccentricity. The implications and limitations of the present results were discussed with respects to the real world situations such as driving cars or flying airplanes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6863-6869
• /
• 2014

A SMT machine is used to place electronic components on a PCB precisely. To place it precisely, after a component inspection, it finds an offset value using a vision camera, and places the precise position on the PCB. In general, to inspect the components with a vision camera, the components stop in front of the camera for inspection, then move to the placement position. On the other hand, if they do not stop in front of a camera, the inspection time will be shortened and the productivity would be increased. In this thesis, when inspecting without stopping in front of a camera, the fastest way among various routes is described. For the gantry passing over a vision camera, both the distance and speed of a gantry moving trajectory were studied, and there was approximately 5% speed increment when using the method suggested in this thesis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1173-1183
• /
• 2009

In order to reduce the download around the Smart UAV(SUAV) at hovering, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including the leading and trailing edge separation, and the large region of separated flow beneath the wing. In order to control the leading edge and trailing edge separation, synthetic jet is located at 0.01c, $0.3c_{flap}$, $0.95c_{flap}$. As non-dimensional frequency, the flow pattern is altered and the rate of drag reduction is changed. The results show that synthetic jets shorten the vortex period and decrease the vortex size by changing local flow structure. By using leading edge jet and trailing edge jet, download is efficiently reduced compared to no control case at hovering mode.