• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.362-368
• /
• 2007

This study was conducted to estimate merchantable volume and yield per diameter (DBH) class of Pinus koraiensis and Larix kaempferi. Stem volume of trees in each diameter class was calculated using the existing equations for taper and height curve. Saw logs and pulpwood volume were then estimated from the stem volume in each diameter class. The final step was to estimate merchantable volume and yield from saw logs, assuming saw logs were used for lumber (boards or dimension products) production only. The results showed that the stem volume of Larix kaempferi was 23~38% higher than that of Pinus koraiensis at the same diameter classes. Both species were able to produce saw logs from the diameter class of 18 cm. Saw logs and pulpwood yield for both species rapidly increased due to the size limitation on small end diameter. This yield reached a maximum of 90% and 88% at 26 cm and 38cm diameter class, respectively, for Pinus koraiensis and Larix kaempferi. Lumber yield estimated for board products ranged from 23% to 56%. In the case of dimension products, Lumber yield became significantly smaller as saw logs were used for larger dimension products. These results can be used for calculating merchantable volume and economic value of trees, as well as determining final lumber products.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.639-645
• /
• 2009

The objective of this research was to introduce the TPI approach for interpreting land-forms of mountain forests in South Korea. We develop an objective procedure to decide the scale factor as a basic analytical unit in land-form classification of rugged mountain areas using TPI. In order to determine the scale factor associated with the pattern of slope profiles, the gradient variance curve was derived from a revised hypsometric curve developed using the relief energy of topographic profiles. Using the gradient variance curve, found was the grid size with which the change in relief energy got the peak point. The grid size at the peak point was determined as the scale factor for the study area. In order to investigate the performance of the procedure based on the gradient variance curve, it was applied to determination of the site-specific scale factors of 3 different terrain conditions; highly-rugged, moderately-rugged and relatively less-rugged. The TPI associated with the corresponding scale factors by study site was, then, determined and used in classifying the land-forms. According to the results of this study, the scale factor gets shorter with more rugged terrain conditions. It was also found that the numbers of valleys and ridges estimated with TPI show almost the same trends as those of the observed and the scale factors tends to approach to the mean distance of ridges.

• The Korean Journal of Nuclear Medicine
• /
• v.14 no.1
• /
• pp.1-8
• /
• 1980

Serum TSH levels were measured by radioimmunoassay before and after intravenous administration of synthetic thyrotropin-releasing hormone (TRH) to 15 normal subjects and 55 patients with primary thyroid disease (14 patients with euthyroidism, 24 patients with thyrotoxicosis and 17 patients with hypothyroidism) to evaluate pituitary TSH reserve and its diagnostic availability. The observed results were as follows. 1. In normal subjects, serum TSH responses to synthetic TRH were $3.2{\pm}1.0$ at 0min (baseline TSH level), $8.0{\pm}4.0$ at 10min, $11.7{\pm}5.0$ at 20min, $13.7{\pm}7.1$ at 30min, $9.7{\pm}5.0$ at 60min., $5.2{\pm}2.0$ at 120min. and $3.6{\pm}0.4{\mu}U/ml$ at 180 min. Serum TSH peaked at $20{\sim}30$ minutes and returned nearly to baseline at 180minutes. 2. In euthyroid group, serum TSH responses to synthetic TRH were $3.3{\pm}1.6$ at 0min, $8.6{\pm}8.0$ at 10min, $10.9{\pm}8.5$ at 20min, $12.5{\pm}8.4$ at 30min, $9.0{\pm}5.9$ at 60min, $5.6{\pm}2.6$ at 120min and $3.5{\pm}1.3{\mu}U/ml$ at 180min. No significant difference revealed between euthyroid group and normal subjects (p>0.05). 3. In hyperthyroid group, serum TSH responses to synthetic TRH were $1.5{\pm}0.6$ at 0min, $2.2{\pm}0.8$ at 10min., $2.3{\pm}1.0$ at 20min., $2.4{\pm}1.5$ at 30min., $2.1{\pm}1.1$ at 60min., $1.9{\pm}0.2$ at 120min. and $1.5{\pm}0.8{\mu}U/ml$ at 180min., No response to TRH showed. 4. In hypothyroid group, mean values of serum TSH response to synthetic TRH were 42.0 at 0min., 60.6 at 10min., 124.8 at 20min., 123.0 at 30min., 101.6 at 60min., 64.3 at 120min. and $15.5{\mu}U/ml$ at 180 min., Patients with primary hypothyroidism showed an exaggerated TSH response to synthetic TRH despite their high basal TSH. 5. Side effects attending synthetic TRH administration were transient nausea (59.0%), desire to micturate (59.0%), feeling of flushing(19.7%), dizziness (45.9%), metallic taste (9.8%) and headache (19.7%). Any side effect didn't show in 16.4%. These symptoms began almost immediately after TRH intravenous injection and lasted several minutes, and not related to dose or response in the person experiencing it.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.6
• /
• pp.623-641
• /
• 2020

About 5 km length of tunnels were constructed by mechanized tunnelling method using closed type shield TBM. In order to avoid construction delay problems for ensuring timely electricity transmission, it is necessary to increase the prediction accuracy of the excavation process involving machines according to rock mass types. This is important to corroborate the project duration and optimum operation for various considerations involved in the machine. So, full-scale tunnelling tests were performed for developing the advance rate model to be appropriately used for 3.6 m diameter shield TBM. About 100 test cases were established and performed using various operational parameters such as thrust force and rotational speed of cuttterhead in representative uniaxial compressive strengths. Accordingly, relationships between normal force and penetration depth and, between UCS and torque were suggested which consider UCS and thrust force conditions according to weathered, soft, hard rocks. Capacity analysis of cutterhead was performed and optimum operational conditions were also suggested based on the developed model. Based on this study, it can be expected that the project construction duration can be reduced and users can benefit from the provision of earlier service.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.29-33
• /
• 2003

There are reports that the myopia progression have been difference according to myopia degree and age. In this studies, we divided into three investigated groups. The A group is the lower elementary school(50), the B group is the high elementary school(50), the C group is the junior high school(50) and the D group is the high school students(50). The myopia progression have been compared with each group and most variable terms have been investigated. We have analyzed the refraction inspection record that were investigated to put on spectacles in three years(visiting three times or more). The subject of study were 200 persons(men 100, women 100), 1. The distribution of equivalence with ages : A group -2.72D, B group -2.90D, C group -3.53D, D group -3.96D. 2. The pupillary distance have been 57.4mm(A), 59.9mm(B), 61.6mm(C), 63.4mm(D). 3. On a monthly variation : -0.02D(A), -0.045(B), -0.050D(C), -0.025(D) in men, and -0.06D(A), -0.06D(B), -0.045(C), -0.04D(D) in women. 4. After due considering monthly variation and suppose that the variatting times of spectacles degress were time of refracting inspection. The result : 3.6 month for A group, 4.8 month for B group, 5.3 month for C group and 7.7 month for D group.

• Clinical and Experimental Pediatrics
• /
• v.49 no.7
• /
• pp.763-768
• /
• 2006

Purpose : We investigated the risk of aspiration using the lipid-laden macrophage index(LLMI) from laryngeal lavages in infants with bronchiolitis. Methods : Laryngeal lavages from 22 infants with acute bronchiolitis caused by respiratory syncytial virus(RSV) were evaluated during the acute stage. Repeat studies were performed at 3 to 4 weeks after the initial study(remission stage). Lavage cell counts and differentials were determined. The amount of lipid per single macrophage was evaluated and the LLMI was determined by evaluating 100 cells. Comparisons between acute stage and remission stage were made. Twenty-four hour pH monitoring(pHm) was performed in 12 patients. Results : The total cell number was significantly higher in the acute stage compared with the remission stage(P<0.05). The LLMIs in the acute stage were significantly higher than those in the remission stage(P<0.05). The neutrophils percentage of laryngeal lavage correlated with the LLMI(r=0.69, P<0.001). Four children had positive pHm recordings(pH-positive infants) and eight had negative pHm recordings(pH-negative infants). The pH-positive infants had higher LLMI and higher neutrophils percentage than those of the pH-negative infants(P<0.05). Conclusion : These findings suggest that there is a transient increased risk of aspiration during bronchiolitis. The LLMI from laryngeal lavage may be a useful marker for pulmonary aspiration in infants with bronchiolitis.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.300-307
• /
• 1998

It is not an easy task for forest managers to make sound decisions on forest management and operations planning because of huge sets of spatial and temporal data and complex decision-making processes involved. However, as an efficient tool, GIS techniques enable them to enhance broad understandings on forest inventory and management conditions. In this study, we developed a GIS model for field use in forest management. In building the model, we have chosen MapInfo version 4.0 as the basic engine of the model. The model also includes an interface module to help forest managers use MapInfo functions easily. It handles MapInfo functions required to manage inventory data and analyze spatial distributions of forest stands. For testing field applicability of the model, we have build field data sets for a district of Chunchun National Forest. Then, we tested functions through quarrying stand attributes and constructing thematic maps. In this paper, the structures and functions of the model as well as the results of field applications are discussed.

• Journal of Korean Society of Forest Science
• /
• v.84 no.3
• /
• pp.333-342
• /
• 1995

A user - oriented computer model to aid designing forest road is developed to release the burden by increasing efficiency of time - consuming and laborious road design works. In this paper, the structures and functions of the model are discussed. The model consists of functional modules : 1)input module to treat survey data and design criteria ; 2)road design module to generate preliminary road layout, horizontal and vertical curvatures and curve widening ; 3)earthwork analysis module to determine the economic mass movement ; 4)report writer module to produce hard copies of engineering drawings for plan views, cross - sections and profiles, earthwork calculation sheets and mass movement diagrams. In addition, the report writer also provides the information on earthwork disturbance along the cut and - fill slopes. The modules are designed to be fully - integrated to enable the users to perform engineering analyses and evaluate design alternatives in a series of road - design procedures.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.742-749
• /
• 2007

The objective of this study was to develop thinning effect analysis model (TEAM) using individual-tree distance-independent growth model of Pinus koraiensis Stands. The TEAM was designed to analyze thinning effects associated with such thinning prescriptions as the number, timing, intensity, and method of thinnings. To testing TEAM application, stand growth effects were compared with seven scenarios according to thinning prescription plan. In the results, it was possible to estimate the number of trees, height, volume with diameter (DBH) class of individual trees, and average diameter growth, height growth, the number of trees and volume growth per ha of stands. The result of sensitivity analysis on one Pinus koraiensis stand, it was not sure to expect the much more volume at the rotation age by stand density control applying thinning prescription. In the case of thinning, total yield volume has much more $40{\sim}75m^3$ per ha, within 5 cm in average diameter growth and within 1 m in average height growth than thats of non-thinning over increasing stand age. TEAM, as decision making support system, can be used for selecting the thinning prescription trial and determining one of some thinning prescription plan in different site specific stand environments.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.617-626
• /
• 2008

Recently, it has been issued whether the current permission standards for forest land-use conversion is adequate or not. This study was aimed at evaluating the propriety of the current permission standards using the Delphi technique, which is one of survey techniques regarding experts's opinions. The results of the survey indicated that the standards related to the connection development restriction and the height of the first berm were underrated in most of the evaluation factors. The size limit and the altitude restriction of the land-use conversion also have a low propriety or applicability due to their vagueness. In case of average slope, its applicability was rated as significantly low because there is no standardized method for estimating or verifying the average slope. A statistical analysis based on coefficient of variation and one-way ANOVA were conducted to examine whether each group of experts agree with these survey results. It is appeared that the survey using Delphi technique could successfully achieved an agreement from each group of experts. Overall, evaluation factors considered in this study seems to be effective to verify the problems of each standards and to guide to improvement of the standards.