• 제목/요약/키워드: 정주지

검색결과 298건 처리시간 0.028초

위치기반 비주얼 서보잉을 위한 견실한 위치 추적 및 양팔 로봇의 조작작업에의 응용 (Robust Position Tracking for Position-Based Visual Servoing and Its Application to Dual-Arm Task)

  • 김찬오;최성;정주노;양광웅;김홍석
    • 로봇학회논문지
    • /
    • 제2권2호
    • /
    • pp.129-136
    • /
    • 2007
  • This paper introduces a position-based robust visual servoing method which is developed for operation of a human-like robot with two arms. The proposed visual servoing method utilizes SIFT algorithm for object detection and CAMSHIFT algorithm for object tracking. While the conventional CAMSHIFT has been used mainly for object tracking in a 2D image plane, we extend its usage for object tracking in 3D space, by combining the results of CAMSHIFT for two image plane of a stereo camera. This approach shows a robust and dependable result. Once the robot's task is defined based on the extracted 3D information, the robot is commanded to carry out the task. We conduct several position-based visual servoing tasks and compare performances under different conditions. The results show that the proposed visual tracking algorithm is simple but very effective for position-based visual servoing.

  • PDF

파지 예비형상과 물체원형 정보를 활용한 세손가락 로봇손의 파지경로계획 (Grasp Planning for Three-Fingered Robot Hands using Taxonomy-Based Preformed Grasp and Object Primitives)

  • 정현환;박종우;정주노;박종우
    • 로봇학회논문지
    • /
    • 제3권2호
    • /
    • pp.123-130
    • /
    • 2008
  • In this paper, we present a grasp planning method using grasp taxonomy and object primitives. Our grasp taxonomy includes newly defined grasp methods such as thumb supported pinch and palm supported pinch, to enhance grasp robustness. On the target surface, locations of finger-print that will be contacted by the robot fingers are sampled. The sampling is made to be consistent to the grasp taxonomy, called preformed grasps, matched to the target object. We perform simulations to examine the validity and the efficacy of the proposed grasp planning method.

  • PDF

FDTD법을 이용한 GPS용 마이크로스트림 패치 안테나의 원형편파 특성해석 및 설계 (Design and Analysis of Circular Polarization Characteristics of Microstrip Patch Antenna for GPS using FDTD Method)

  • 최희주;김민호;정주수;변건식
    • 한국정보통신학회논문지
    • /
    • 제3권3호
    • /
    • pp.533-540
    • /
    • 1999
  • 본 논문에서는 구형 패치를 이용하여 GPS용 마이크로스트립 안테나를 설계하였으며 안테나의 특성을 확인하기 위하여 시뮬레이션을 통해 단일 구형 마이크로스트립 패치 안테나의 폭과 급전선을 변화 시켰다. 그리고 축비를 이용하여 우선회 원형편파 특성을 확인하였고, 결과를 통해 유한차분 시간영역법은 마이크로스트립 안테나를 설계하기 위한 효과적인 방법임을 확인하였다. 시뮬레이션을 통한 GPS위성으로부터 수신된 주파수의 공진점을 확인하였고, 측정치와 비교적 잘 일치하였다.

  • PDF

우주 발사 시스템 개발에 있어서의 SE 관리기법 적용 (Application of SE Management Techniques for Space Launch System Development)

  • 조미옥;조병규;오범석;박정주;조광래
    • 시스템엔지니어링학술지
    • /
    • 제1권1호
    • /
    • pp.53-60
    • /
    • 2005
  • System engineering(SE) management techniques applied for space launch system development are introduced to assess the current status and address the effectiveness of these techniques. Management plans and guides are prepared for the work breakdown structure, data, configuration, interface control, quality assurance, procurement, reliability, risk and verification/validat ion. Further improvement is required for the system engineering management plan(SEMP) to merge the international cooperation into current engineering management system.

  • PDF

위치기반 SNS 앱 설계 (Design of Location-based SNS Application)

  • 정주호;정형지;최준녕;정원영;황소영;유동희
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.52-53
    • /
    • 2013
  • 스마트 기기와 안드로이드 플랫폼의 급속한 보급은 모바일 애플리케이션들의 개발을 촉진하고 있으며, 게임, 소셜 네트워크 서비스 (SNS), 교육 등 다양한 도메인 분야에서 애플리케이션들이 개발되고 성공적인 사례도 발표되고 있다. 이동통신 칩과 결합된 GPS 수신기가 휴대폰 및 대부분의 스마트기기에 장착됨에 따라 위치 정보에 기반한 다양한 서비스가 활용되고 있다. 본 논문에서는 위치정보와 소셜 네트워크 서비스를 결합하여 가입자간 정보 공유 및 커뮤니케이션, 검색, 위치정보 등 다양한 비즈니스에 활용될 수 있는 위치기반 SNS 앱의 설계를 제안한다.

  • PDF

다양한 펄스 반복률에서의 NPN BJT (Bipolar Junction Transistor)의 파괴 특성에 관한 연구 (A Study on Destruction Characteristics of BJT (Bipolar Junction Transistor) at Different Pulse Repetition Rate)

  • 방정주;허창수;이종원
    • 한국전기전자재료학회논문지
    • /
    • 제27권3호
    • /
    • pp.167-171
    • /
    • 2014
  • This paper examines the destruction behavior of NPN BJT (bipolar junction transistor) by repetition pulse. The injected pulse has a rise time of 1 ns and the maximum peak voltage of 2 kV. Pulse was injected into the base of transistor. Transistor was destroyed, current flows even when the base power is turned off. Cause the destruction of the transistor is damaged by heat. Breakdown voltage of the transistor is 975 V at single pulse, and repetition pulse is 525~575 V. Pulse repetition rate increases, the DT (destruction threshold) is reduced. Pulse Repetition rate is high, level of transistor destruction is more serious.

오픈플랜형 초등학교 다목적 공간 운영의식 분석 (An Analysis about the Consciousness of Management for Multipurpose Space in Open Planned Elementary Schools)

  • 정주성;류호섭
    • 교육시설 논문지
    • /
    • 제18권1호
    • /
    • pp.11-19
    • /
    • 2011
  • This study was carried out to investigate consciousness of users about management of multipurpose space introduced in open planned elementary school after the year of 1990's. Thirteen open planned elementary schools were participated through questionnaire and interviews. As the results, the positive response was maintained a superior position in the need of multipurpose space and changes of classroom management. Independence type in the arrangement of multipurpose space and the additional corridor type having extra moving line in comparison with the extensional corridor type were remarkably preferred, respectively. The consciousness of utilization about multipurpose space was comparatively low in a type having traffic line in surroundings of classroom compared to a type having entrance or a type having roundabout corridor. Finally, the group accepting changes positively showed high need to solve urgent problems about management of classroom.

  • PDF

시뮬레이션을 활용한 교과교실형 운영 중학교 학생 이동행태 분석 (An Analysis about the Moving Behavior of Students by Simulation on Variation Type in Middle School)

  • 정주성
    • 교육시설 논문지
    • /
    • 제21권3호
    • /
    • pp.11-18
    • /
    • 2014
  • This study was carried out to observe movement behavior of students about a change of physical condition in moving space of variation type using simulation technique. The moving pattern of students was checked by SIMULEX program. The width of corridor was adjusted to 2.4m, 3.0m and 3.9m and a flow coefficient of simulation was estimated with the change of width. The wider the width of corridor was, the lower a flow coefficient was, and the difference was large when the width of corridor was narrow. It was also observed that the flow coefficient was relatively high in all types of corridor setup individual locker. Unit occupation area with the change of width was additionally measured, as shown in the results, the occupation density was low when the width of corridor was wide and a stationary time was short.

교과교실형 운영 중등학교 홈베이스 이용의식 분석 (An Analysis about Awareness of Use in Homebase on Variation Type in Middle and High Schools)

  • 정주성
    • 교육시설 논문지
    • /
    • 제20권3호
    • /
    • pp.13-20
    • /
    • 2013
  • This study was carried out to observe awareness of students using homebase on variation type, about a thousand students in four middle and high schools participated in questionnaire. By the analysis of questionnaire, degree of awareness regarded homebase as a base was relatively high in respondents of the schools having easy accessibility of the homebase, and thus, proportions of assigned space for homeroom, using frequency of homebase and time to stay were also high in the group showing high awareness about homebase. Especially, it is noticeable use of homebase was frequent in the schools having subdivided space in itself. This result suggested that the function of homebase as a base of the students can be very important factor to plan schools of variation type.

센서용 세라믹 소체의 전기적 수명지수 산출 (Electrical Life Time Constant Estimation of Ceramic Element for Sensor)

  • 정주영;강동식;선종호;허종철;추영배;박정후
    • 전기학회논문지
    • /
    • 제58권10호
    • /
    • pp.1995-1999
    • /
    • 2009
  • A partial discharge(PD) measurement is a very effective method to assess the insulation condition of high-voltage machines. It is necessary that the life time of the on-line PD measurement sensor is assessed. Therefore, the electrical life time assessment method of ceramic element was reviewed in order to estimate the life time of the on-line PD measurement sensor. The samples were prepared according to the reviewed method and were tested at 8kV, 9kV and 10kV. Based on the obtained results, the life time constant is shown above 59. Also, it is assumed that the estimated life time constant can be used to anticipate the life time and to assess the conformity of the on-line PD measurement sensor.