• Composites Research
• /
• v.31 no.6
• /
• pp.332-339
• /
• 2018

Fiber metal hybrid laminate (FML) can be used as an economic material with superior mechanical properties and light weight than conventional metal by bonding of metal and FRP. However, there are disadvantages that it is difficult to predict fracture behavior because of the large difference in properties depending on the type of fiber and lamination conditions. In this paper, we study the failure behavior of hybrid materials with laminated glass fiber reinforced plastics (GFRP, GEP118, woven type) in Al6061-T6 alloy. The Al alloys were coated with GFRP 1, 3, and 5 layers, and fracture behavior was analyzed by using a static test and a low cycle fatigue test. In the low cycle fatigue test, strain - life analysis and the total strain energy density method were used to analyze and predict the fatigue life. The Al alloy did not have tensile properties strengthening effect due to the GFRP coating. The fatigue hysteresis geometry followed the behavior of the Al alloy, the base material, regardless of the GFRP coating and number of coatings. As a result of the low cycle fatigue test, the fatigue strength was increased by the coating of GFRP, but it did not increase proportionally with the number of GFRP layers.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.10
• /
• pp.31-40
• /
• 2022

This study compares elastic moduli calculated using two stiffness testing methods with different strain ranges to evaluate the stress-settlement characteristics of foundation support layers. Elastic moduli were calculated by the soil stiffness gauge (SSG) in the micro-strain range and the plate load test (PLT) in the medium strain range. To apply the elastic moduli obtained by the two testing methods with different strain ranges to the design and construction of foundation soils, the correlation between each measurement value should be identified in advance. As a result of the comparative analysis of the elastic moduli calculated using the two methods in weathered soil and rock, which are representative support layers in Korea, the calculated elastic moduli differed depending on the types of soil and stress conditions. For various soil types, the static elastic modulus obtained by the PLT was reduced by 56% because of the difference in the strain level of the test compared with the dynamic elastic modulus obtained by the SSG. Therefore, the results show that it is necessary to apply corrections to the stress distribution, stress level, and dynamic effect according to the ground stiffness to effectively use the SSG instead of the PLT.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.315-327
• /
• 2009

In this study, the static test of CFT truss girders for different f/L ratios was conducted to determine how the ultimate strength of the CFT truss girder was affected by different f/L ratios. A total of two CFT truss girders were constructed and tested under bending condition. The length of all specimens is 20,000 mm. The CFT truss girder is a tubular truss composed of chord members made of concrete-filled circular tubes. The main parameter analyzed in the experimental study was the f/L ratio. This factor was experimentally investigated to assess their influence on ultimate strength and stiffness. The test results show that CFT truss girder has good elastic-plastic property and ductility. The presence of the f/L ratios in CFT truss girders alters its ultimate strength because of the global stiffness of the CFT truss girders. The ultimate strength of CFT truss girders increases as the f/L ratio increases. If the f/L ratio of the CFT truss girders increases twofold, the ultimate strengths increase by 80%. The CFT truss girders showed that they retained large deformation capacity, even after reaching the ultimate strength. Results of this investigation demonstrated the potential for efficiently using a CFT truss as a bridge girder.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.100-121
• /
• 2009

This study is subjected to those gardens of the Korean Folk Village 'Oeam-Ri' designed in 1920s. - transitional period of traditional gardens - and define socio-cultural change's influences and through documents on garden design, descendant's testimony and measured drawings, to understand that period's garden culture's characteristics according to garden design elements. This study applied following analysis methods and procedures to derive out characteristics of transitional garden culture. Analysis on socio-cultural characteristics in 1920s. Analysis on actual condition of transitional garden's design. In this point Outline of the Garden, Space formation, Garden designing elements are (1) water landscape, (2) plant, (3) structures, (4) paving, to derive out characteristics of the transitional garden. The results follow as below; First, during the transitional period 1920s, the economical development, fueled by opening nation's door to foreign countries and indication of collapse of statue systems together with idea of practical science and Enlightenment Thought, was element of changes in garden style. Second, Garden Designers of transitional gardens in 'Oeam-Ri' were limited to upper class of the society. They were wealthy enough to maintain their high social statue in rapidly changing society. As results, tendency of returning to nature developed gardens located in a site of scenic beauty and development of geographical features arranging techniques, and also showed copying foreign styles. Third, arrangement of garden and space composition, in most cases, composed of buildings and yards. Changes in water landscape features and garden spaces are centered to main-yard. Major changes of the garden spaces are water landscapes and plants that showing foreign influences. Fifth, scenic appearance techniques appears with dense garden space and emphasizing visual scenic view. Sixth, the characteristics of transitional garden design techniques are development of geographical feature arranging techniques, changes and mixture of the materials and garden types, emphasizing garden's decorative beauty, change of concept of yard within house into garden, changes from 'borrowing of landscapes' to 'selecting landscapes', changes of front garden from emptiness to fullness, changes of attitudes of enjoying gardens from 'staying calm in the garden' to 'moving or walking in the garden', changes to inner-oriented view, and changes from 'just watching and enjoying the nature' to 'enjoying specific objects'. This study is one of the efforts to restore the identity of Korean Traditional Garden by approaching and observing modern era which function as bridge between tradition and present day, and we observed transitional aspects of changes of traditional garden into modern garden. Hereafter, more studies will be needed to Modern Garden Design be recognized as part of Korean Garden Design History and these would be author's next assignment.

• Solar Energy
• /
• v.13 no.2_3
• /
• pp.65-78
• /
• 1993

An overdose of fossil fuel for greenhouse heating causes not only the high cost and low quality of agricultural products, but also the environmental pollution of farm village. To solve these problems it is desirable to maximize the solar energy utilization for the heating of greenhouse in winter season. In this study phase change materials were selected to store solar energy concentratively for heating the greenhouse and their characteristics of thermal energy storage were analyzed. The results were summarized as follows. The organic $C_{28}H_{58}$, and the inorganic $CH_3COONa{\cdot}3H_2O\;and\;Na_2SO_4{\cdot}10H_2O$ were selected as low temperature latent heat storage materials. The equation of critical radius was derived to define the generating mechanism of the maximum latent heat of phase change materials. The melting point of $C_{28}H_{58}$ was $62^{\circ}C$, and the latent heat was $50.0{\sim}52.0kcal/kg$. The specific heat of liquid and solid phase was $0.54{\sim}0.69kcal/kg^{\circ}C$ and $0.57{\sim}0.75kcal/kg^{\circ}C$ respectively. The melting point of $CH_3COONa{\cdot}3H_2O$ was $61{\sim}62^{\circ}C$, the latent heat was $64.9{\sim}65.8$ kcal/kg and the specific heat of liquid and solid phase was respectively $0.83kcal/kg^{\circ}C$ and $0.51{\sim}0.52kcal/kg^{\circ}C$. The melting point of $Na_2SO_4{\cdot}10H_2O$ was $30{\sim}30.9^{\circ}C$, the latent heat was 53.0 kcal/kg and the specific heat of liquid and solid phase was respectively $0.78{\sim}0.89kcal/kg^{\circ}C$ and $0.50{\sim}0.7kcal/kg^{\circ}C$ When the urea of 21.85% was added to control the melting point of $Na_2SO_4{\cdot}10H_2O$ and the phase change cycles were repeated from 0 to 600, the melting point was $16.7{\sim}16.0^{\circ}C$ and the latent heat was $36.0{\sim}28.0kcal/kg^{\circ}C$.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.1 s.39
• /
• pp.65-76
• /
• 2006

The purposes of this study were to segment adolescents into groups by Satir's communication and self-esteem and to investigate the differences among the groups regarding impulse buying of clothing and clothing behavior. The study distributed the questionnaires to the adolescents who were high school students in seoul. The total respondents were 596. The data were analyzed by factor analysis, k-means cluster analysis, ANOVA, Duncan test, regression and ${\chi}2-test$. Factor analysis showed that impulse buying of clothing had three dimensions: sensitive aspects of products stimulation, marketing situation stimulation and non-Plan stimulation. K-means cluster analysis showed that adolescents were segmented into four groups(blame-high self esteem, placate-high self esteem, blame-low self esteem, placate-low self esteem). The four groups were significantly different in regard to three dimensions of sensitive aspects of products stimulation, marketing situation stimulation and non-plan stimulation. For example, placate-high and low self esteem groups were influenced by sensitive aspects of products stimulation and marketing situation stimulation(-). And blame-high and low self esteem groups were influenced by marketing situation stimulation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.2
• /
• pp.107-120
• /
• 2015

This study compares own-brand exporting SMEs' utilization of various government-run exporting service programs that provided support in searching for overseas distributors, in overseas market research, and in marketing support. Researchers measure how important firms found each of these components of the program, as well as firms' satisfaction with these services, based on the type of product exported (industrial vs. consumer goods) and the level of economic development of the host countries (developed, newly industrialized, and developing.) A total of 245 own-brand exporting SMEs were surveyed and analyzed in this study. Results indicated that KOTRA was the most frequently used organization by the sample SMEs, regardless of the product type and the economic level of host countries. Industrial-goods exporting SMEs found support in searching for overseas distributors more important than consumer-goods exporting SMEs. SMEs exporting to developed countries considered overseas market research and marketing support and searching for overseas distributor programs more important than SMEs exporting to NIE or developing countries. In addition, industrial-goods exporting SMEs were more satisfied with the overseas market research and marketing support and searching for overseas distributor programs than consumer-goods exporting SMEs. However, there were no differences in satisfaction among firms based on the level of economic development of host countries. Several cases of significant correlations between the importance of and satisfaction with the utilization of government exporting service programs were found.

• Journal of agricultural medicine and community health
• /
• v.38 no.4
• /
• pp.243-256
• /
• 2013

Objectives: This study was to investigate fear of falling and related factors in elderly living alone based on fall experience. Methods: Participants were 404 elderly women(faller=148, non-faller=256) over 65 years who were homebound living alone in Jeollanam-do Province. Face-to-face interviews were conducted using questionnaires from April $23^{th}$ to June $9^{th}$ 2013. The questionnaires consisted of demographic variables, fall experience, Fear of falling questionnaire(FOFQ), Falls Efficacy Scale(FES) and Center for Epidemiologic Studies Depression(CES-D). The collected data were analyzed using the SPSS version 14.0. Results: The fear of falling and the influential factors were different according to fall experience. Regression model for fear of falling in fallers significantly accounted for 46.1%(F=6.71, p<0.001); difficulty of performing activity, depression, fall-efficacy, static balance and assistive devices. Regression model for fear of falling in non-fallers significantly accounted for 55.2%(F=15.16, p<0.001); fall-efficacy, environmental hazards, difficulty of performing activity, risk of nutrition, housing type, dizziness and assistive devices. Conclusion: Results demonstrate that fall is an important health problem for elderly women living alone, and show fall experience for factors influencing fear of falling. These results could be used in the developing fall prevention programs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.18-28
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were performed on one unreinforced beam-column specimen and two reinforced specimens with U-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of U-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D, agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.668-682
• /
• 2017

Alignments of railways recently constructed in Korea have been straightened due to the advent of high-speed rail, which means increasing the numbers of tunnels and bridges. Overbreak during tunnel construction may be unavoidable, and is very influential on overall stability. Over-excavation in tunneling is also one of the most important factors in construction costs. Overbreak problems around crown areas have decreased with improvements of excavation methods, but overbreak problems around bottom areas have not decreased because those areas are not very influential on tunnel stability compared with crown areas. The filling costs of 10 cm thickness of overbreak at the bottom of a tunnel are covered under construction costs by Korea Railway Authority regulations, but filling costs for more than the covered thickness are considered losses of construction cost. The filling material for overbreak bottoms of tunnels should be concrete, but concrete and mixed granular materials with fractured rock are also used for some sites. Tunnels in which granular materials with fractured rock are used may have a discontinuous section under the concrete slab track. The discontinuous section influences the propagation of waves generated from train operation. When the bottom of a tunnel is filled with only concrete material, the bottom of the tunnel can be considered as a continuous section, in which the waves generated from a train may propagate without reflection waves. However, a discontinuous section filled with mixed granular materials may reflect waves, which can cause resonance of vibration. The filled materials and vibration propagation characteristics are studied in this research. Tunnel bottom filling materials that have ratios of granular material to concrete of 5.0 %, 11.5 %, and 18.0 % are investigated. Samples were made and tested to determine their material properties. Static numerical analyses were performed using the FEM program under train operation load; test results were found to satisfy the stability requirements. However, dynamic analysis results show that some mixed ratios may generate resonance vibration from train operation at certain speeds.