• 제목/요약/키워드: 정압계수

검색결과 44건 처리시간 0.019초

풍동실험을 통한 능동위상배열레이더에서 다층레이돔에 작용하는 공기력과 풍압의 실험적 연구 (Wind Tunnel Test of Aerodynamic Forces and Wind Pressures Acting on Muilti-layer Radom in Active Phased Array Radar)

  • 임성환;강광희;최지호;이승호;권순덕
    • 한국군사과학기술학회지
    • /
    • 제17권1호
    • /
    • pp.149-157
    • /
    • 2014
  • In this paper, we investigated the sensitivity of aerostatic force coefficients of multi-layer radom in the various wind speeds. The test was conducted in KOCED Wind Tunnel Center in Chonbuk National University, and wind speeds were in the range from 5 m/s to 26 m/s in order to determine the Reynolds number independence. The test results of present multi-layer radom were not affected by the Reynolds number, The maximum positive pressure coefficient was found to be 1.08 at the center of the front of the plane in angle of attack of 0 degree, the maximum negative pressure coefficient was -2.03 at the upper right corner in angle of attack of 120 degree, while maximum drag coefficient was 1.11 in angle of attack of 180 degree.

음속 및 초음속 노즐을 통한 Gas-Solid Suspension 유동에 대한 해석적 연구 (Analytical Study on the Gas-Solid Suspension Flows through Sonic and Supersonic Nozzles)

  • ;;김희동
    • 한국추진공학회지
    • /
    • 제17권1호
    • /
    • pp.9-17
    • /
    • 2013
  • Gas-solid suspension 유동에서의 입자운동과 그 운동이 유동장에 미치는 영향을 명시하고, 이 유동에 대한 이해를 얻기 위해 많은 연구가 수행 되어 왔다. 본 논문에서는 gas-solid suspension 유동에 대한 노즐의 입구/출구 압력비, 입자/기체 부하, 입자의 직경에 따른 영향 등을 연구하기 위한 분석적 모델을 개발 하였다. 노즐을 통한 유량, Mach수, 추력계수 및 정압 변화에 대한 입자/기체 부하의 영향을 분석하였다. 그 결과로부터 입자의 존재로 인해 충격파의 강도가 줄어드는 것으로 판단되며, 입자직경이 커질수록 속도는 작아지고, slip velocity는 커지게 될 것이다. 또한, 더 작은 직경의 입자에 대한 suspension 유동은 이상기체에 대한 단상유동의 결과와 같은 경향이 나타나며, 주위 압력에 따라 더 큰 입자/기체 부하나 배압비에 대한 추력계수가 더 크게 나타났다.

곡물냉각기의 개발 (Development of a New Commercial Grain Cooler)

  • 김동철;김의웅;금동혁;한종규
    • 한국식품저장유통학회지
    • /
    • 제11권2호
    • /
    • pp.250-256
    • /
    • 2004
  • 국내의 기상조건 및 벼의 수확후 처리여건에 적합한 곡물냉각기를 개발하고, 냉각능력, 재열능력, 가열능력, 소요전력 및 성능계수 등의 성능을 측정하여 설계조건에 적합한지를 분석하였다. 그 결과를 요약하면 다음과 같다. 압축기 무부하전자변과, 재열기 및 증발기에 고온고압의 냉매가스를 공급하여 냉각능력을 0∼100%까지 제어할 수 있고, 온도 5$^{\circ}C$이상, 상대습도 54∼95%의 정온정습 공기를 발생할 수 있는 1일 최대 벼 200톤을 냉각할 수 있는 곡물냉각기를 개발하였다. 이 곡물냉각기의 최대냉각능력은 35,284㎉/hr, 송풍량 및 정압은 각각 120㎥/min, 279mmAq이었으며, 재열기를 통한 냉각공기의 최대 온도상승 및 상대습도의 저하범위는 각각 7.6∼8.6$^{\circ}C$, 34.5∼41.0%이었으며, 최대가열능력은 5.6$^{\circ}C$이었다. 또한, 최대 소요동력은 22.8㎾이었으나, 압축기의 무부하 전자변이 작동될 때는 총소요동력의 33.3%, 압축기 소요축동력의 44.7%가 절약되는 것으로 나타났으며, 제어조건에 따라 전체소요동력의 26.7~33.3%정도가 절약되는 것으로 나타났으며, 냉동시스템의 성능계수는 과냉각으로 인해 표준냉동사이클하에서의 4.0보다 높은 4.71이었으며, 전성능계수는 1.8로 나타났다.

심부 화강암반의 수리특성 평가를 위한 현장수리시험 비교 및 해석 연구 (Comparison and Analysis of Field Hydraulic Tests to Evaluate Hydraulic Characteristics in Deep Granite Rockmass)

  • 천대성;석희준;이성곤;김태희;김기석;전성천;배성호
    • 터널과지하공간
    • /
    • 제34권4호
    • /
    • pp.393-412
    • /
    • 2024
  • 고준위방사성폐기물 처분부지 선정에 있어 부지의 수리지질학적 연구는 매우 중요하며, 수리전도도와 저류계수 등이 대표적 수리지질학적 인자이다. 본 연구는 원주지역 심부 화강암반을 대상으로 두 가지 다른 종류의 현장수리시험 장비와 방법으로 획득한 수리전도도를 비교 분석하여 심부 화강암반의 수리특성을 파악하였다. 하나는 지하수 관정 자동 주입 시스템 장비를 활용하여 최대 심도 602.0 m에 대해 루전시험, 정압주입시험, 슬러그시험을 수행하였고, 산정된 수리전도도는1.26E-9 ~ 4.16E-8 m/s의 범위를 보였다. 전체 심도에서 수리전도도의 최대와 최소 차이는 약 33배로 나타났고, 동일 시험 구간에서 시험 방법이나 해석방법에 의한 차이는 1.13 ~ 8.25배로 나타났다. 다른 하나는 대심도 수리특성 조사 시스템을 활용하여 최대 심도 705.1 m에 대해 정압주입시험, 펄스시험을 수행하여 산정된 수리전도도는 1.60E-10 ~ 2.05E-8 m/s으로 최대와 최소 차이는 약 130배 정도로 나타났다. 정압주입시험에서 해석방법에 따른 차이는 1.02 ~ 2.8 배로 나타났다. 두 시험 장치와 방법에서 산정한 수리전도도는 대체로 E-9와 E-8 m/s로 유사한 범위를 보였으며, 심도에 따른 뚜렷한 경향은 관찰되지 않았다. 현장수리시험이 수행된 원주지역 화강암반은 낮은 또는 매우 낮은 암반투수성을 보임을 알 수 있었고, 적용된 시험 장치와 시험 방법에 따라 측정할 수 있는 수리전도도 범위나 적용 심도 등의 차이가 존재하나 대체로 신뢰할 수 있는 결과를 제시한 것으로 판단된다.

순수점성 비뉴톤유체의 물성치들에 대한 농도 및 온도의 영향 (Effects of the Concentration and the Temperature on the Thermophysical Properties of Purely-Viscous Non-Newtonian Fluid)

  • 조금남
    • 대한기계학회논문집
    • /
    • 제18권3호
    • /
    • pp.670-680
    • /
    • 1994
  • The thermophysical properties of Non-Newtonian fluid as the function of the temperature and the concentration are needed in many rheological heat transfer and fluid mechanics problems. The present work investigated the effects of the concentration and the temperature on the thermophysical properties of purely-viscous Non-Newtonian fluids such as the isobaric thermal expansion coefficient, density, zero-shear-rate viscosity, and zero-shear-rate dynamic viscosity within the experimental temperature range from $25^{\circ}C$ to $55^{\circ}C$. The densities of the test fluids were determined as the function of the temperature by utilizing a reference density and the least square equation for the measured isobaric thermal expansion coefficient. As the concentration of purely-viscous Non-Newtonian fluid was increased up to 10,000 wppm, the densities were proportionally increased up to 0.4%. The zero-shear-rate viscosities of test fluids were measured before and after the measurements of the first thermal expansion coefficients and the densities of Non-Newtonian fluid. Even though they were changed up to approximately 22% due to thermal aging and cycling, they had no effects on the thermal expansion coefficients and the densities of Non-Newtonian fluid. The zero-shear-rate dynamic viscosities for purely-viscous Non-Newtonian fluids were compared with the values for distilled water. They showed the similar trend with the zero-shear-rate viscosities due to small differences in the densities for both distilled water and purely-viscous Non-Newtonian fluid.

아파트 건축물 군(群)에 의한 건축물 외장재의 풍압분포 (Distribution of Wind Pressure on Claddings of Apartment Buildings Affected by Neighboring Buildings)

  • 조강표;홍성일;김원술
    • 한국공간구조학회논문집
    • /
    • 제6권1호
    • /
    • pp.91-99
    • /
    • 2006
  • 이 논문은 풍동실험 결과를 토대로 고층아파트 건축물의 풍압분포에 대한 내용을 다루고 있다. 태풍에 의해 창유리 파손을 입은 아파트 단지의 풍압모형을 제작하여 각 건축물의 상호간섭효과를 조사하였다. 풍동실험은 풍압모형을 이용하여 대형경계 층풍동에서 수행하였다. 간섭하는 주변건물의 여부에 따른 실험결과를 비교하고 검토하였다. 주변건물이 없어서 바람을 직접 맞을 때에는 105동, 106동은 주로 정압이 작용하였지만, 주변건물이 둘러싸고 있을 때의 105동, 106동은 큰 부압이 작용하는 것을 관찰할 수 있었다. 따라서 고층아파트 외장재 설계시 외장재의 안전성 확보를 위해서는 풍동실험을 수행하여 바람에 의해 야기되는 상호간섭효과를 고려하는 것이 가장 적합한 방법이라 할 수 있다.

  • PDF

터빈 블레이드 표면과 선형익렬에서의 열전달 및 유동측정 연구 (Heat Transfer and Flow Measurements on the Turbine Blade Surface)

  • 이대희;심재경;박성봉;이재호;윤순현
    • 대한기계학회논문집B
    • /
    • 제23권5호
    • /
    • pp.567-576
    • /
    • 1999
  • An experimental study has been conducted to investigate the effects of the free stream turbulence intensity and Reynolds number on the heat transfer and flow characteristics In the linear turbine cascade. Profiles of the time-averaged velocity, turbulence intensity, and Reynolds stress were measured in the turbine cascade passage. The static pressure and heat transfer distributions on the blade suction and pressure surfaces were also measured. The experiments were made for the Reynolds number based on the chord length, Rec = $2.2{\times}10^4$ to $1.1{\times}10^5$ and the free stream turbulence intensity, $FSTI_1$ = 0.6% to 9.1 %. The uniform heat flux boundary condition on the blade surface was created using the gold film Intrex and the surface temperature was measured by liquid crystal, while hot wire probes were used for the flow measurements. The results show that the free stream turbulence promotes the boundary layer development and delays the flow separation point on the suction surface. It was found that the boundary layer flows on the suction surface for all Reynolds numbers tested with $FSTI_1$ = 0.6% are laminar. It was also found that the heat transfer coefficient on the blade surface increases as the free stream turbulence intensity increases and the flow separation point moves downstream with an increasing Reynolds number. The results of skin friction coefficients are in good agreement with the heat transfer results in that for $FSTI_1{\geq}2.6%$, the turbulent boundary layer separation occurs.

3차원 단열망모델링을 위한 단열수리인자 도출 (Determination of the Fracture Hydraulic Parameters for Three Dimensional Discrete Fracture Network Modeling)

  • 김경수;김천수;배대석;김원영;최영섭;김중렬
    • 대한지하수환경학회지
    • /
    • 제5권2호
    • /
    • pp.80-87
    • /
    • 1998
  • 지하수의 유동로가 시설의 성능에 미치는 영향이 큰 방사성폐기물처분시설에서는 암반블럭규모의 흐름은 단열망개념으로 해석하고 있다. 본 연구는 연구지역의 지하수유동 해석을 위하여 3차원 투수성단열망모델을 구축하기 위한 것으로서, 단열의 기하학적 인자 및 수리인자에 대한 확률분포함수를 도출하고, 3차원 단열망모델링과 수리시험 결과를 이용한 모델 교정까지의 과정을 포함한다. 구간별 정압주입시험의 결과를 Cubic law로서 해석한 결과 단열투수량계수는 lognormal분포일 때 6.12$\times$$10^{-7}$ $m^2$/sec이다. 부정류해석에 의한 유동차원은 주로 방사상 내지 구상유동 특성을 보인다. FracMan 코드를 이용해서 추정된 투수성단열밀도는 1.73이고, 이때 암반블럭규모(l00 m$\times$100 m$\times$100 m)로 모사된 투수성단열의 수는 3,080개이다.다.

  • PDF

감압하에서 1-propanol과 Bromochloromethane의 정압 기-액 평형 (Isobaric Vapor-Liquid Equilibrium of 1-propanol and Bromochloromethane System at Subatmospheric Pressures)

  • 장회구;강춘형
    • 공업화학
    • /
    • 제21권3호
    • /
    • pp.295-300
    • /
    • 2010
  • 1-propanol과 bromochloromethane 혼합물은 공비점의 형성이나 큰 휘발성 차이 때문에 실제 증류탑이나 흡수탑 등의 단위 공정에서 효율적이고 경제적인 운전이 쉽지 않다. 이처럼 비이상성이 큰 혼합물을 효과적으로 다루기 위해서는 혼합물에 대한 기-액 평형 등의 열역학적인 정보가 필수적이다. 본 연구에서는 재순환 기-액 평형장치를 이용하여 일정 압력 하에서 30 kPa에서 70 kPa까지 1-propanol과 bromochloromethane 혼합물의 기-액 평형을 측정하였으며 얻어진 실험 데이터를 UNIQUAC과 NRTL 모델식을 이용하여 상관하였고 과잉 Gibbs 에너지와 활동도 계수를 추산하였다. 또한 Gibbs/Duhem식에 근거한 열역학적 건전성 테스트를 수행하였고 진동 밀도계를 사용하여 이성분계의 과잉 몰부피를 측정하였으며 그 결과를 Redlich-Kister다항식으로 상관하였다.

액정 p-Azoxyanisole의 열역학적 성질에 대한 이론적인 예측 (Theoretical Prediction of the Thermodynamic Properties of Liquid-Crystalline p-Azoxyanisole)

  • 도영규;전무식;이태규
    • 대한화학회지
    • /
    • 제20권2호
    • /
    • pp.118-128
    • /
    • 1976
  • 액체에 대한 significant structure theory 와 상의 전이에 대한 Bragg-Williams근사를 사용하여 액정 화합물인 p-azoxyanisole의 열역학적 성질을 nematic phase와 isotropic phase의 온도범위에 걸쳐 계산하였다. Isotropic phase는 일반적인 액체로 보았으며 nematic phase는 액체적인 성질외에도 분자쌍극자의 배열에 의한 영향도 고려하였다. p-Azoxyanisole의 액체적인 성질은 significant structure theory로 기술하였으며 분자쌍극과 배열에 의한 영향은 Bragg-Williams 근사로써 고려하였다. 부피, 증기압, 정압비열, 열팽창계수, nematic-isotropic 전이점에서의 엔트로피 엔탈피 변화, 절대엔트로피, Helmholtz free energy등을 계산하여 실험치와 비교하였다.

  • PDF