• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2006

Purpose: IMRT quality assurance(Q.A) is consist of the absolute dosimetry using ionization chamber and relative dosimetry using the film. We have in general used 0.015 cc ionization chamber, because small size and measure the point dose. But this ionization chamber is too small to give an accurate measurement value. In this study, we have examined the degree of calculated to measured dose difference in intensity modulated radiotherapy(IMRT) based on the observed/expected ratio using various kinds of ion chambers, which were used for absolute dosimetry. Materials and Methods: we peformed the 6 cases of IMRT sliding-window method for head and neck cases. Radiation was delivered by using a Clinac 21EX unit(Varian, USA) generating a 6 MV x-ray beam, which is equipped with an integrated multileaf collimator. The dose rate for IMRT treatment is set to 300 MU/min. The ion chamber was located 5cm below the surface of phantom giving 100cm as a source-axis distance(SAD). The various types of ion chambers were used including 0.015cc(pin point type 31014, PTW. Germany), 0.125 cc(micro type 31002, PTW, Germany) and 0.6 cc(famer type 30002, PTW, Germany). The measurement point was carefully chosen to be located at low-gradient area. Results: The experimental results show that the average differences between plan value and measured value are ${\pm}0.91%$ for 0.015 cc pin point chamber, ${\pm}0.52%$ for 0.125 cc micro type chamber and ${\pm}0.76%$ for farmer type 0.6cc chamber. The 0.125 cc micro type chamber is appropriate size for dose measure in IMRT. Conclusion: IMRT Q.A is the important procedure. Based on the various types of ion chamber measurements, we have demonstrated that the dose discrepancy between calculated dose distribution and measured dose distribution for IMRT plans is dependent on the size of ion chambers. The reason is small size ionization chamber have the high signal-to-noise ratio and big size ionization chamber is not located accurate measurement point. Therefore our results suggest the 0.125 cc farmer type chamber is appropriate size for dose measure in IMRT.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.459-467
• /
• 2020

In this study, we investigated the changes in both ambient temperature and microbial contamination of fresh convenience foods (FCFs) caused by the behavior of consumers after purchase. According to consumer survey results, it took 0.5 to 3 h put the purchased FCF in a home refrigerator or consume it. Only aerobic bacteria and Staphylococcus aureus (below maximum permitted limit) were detected in FCFs obtained from a local market. During storage of FCFs in a vehicle trunk for up to 3 h. the external and internal temperatures of FCFs were found to be 19 and 18.5℃ in spring, 44 and 42℃ in summer, 31.3 and 29.2℃ in autumn, and 17.6 and 16.8℃ in winter, respectively. Changes in contamination levels of aerobic bacteria on FCFs stored in a vehicle trunk for up to 3 hours are as follows: 2.72 → 3.41 log CFU/g in spring, 3.11 → 4.32 log CFU/g in summer, 3.08 → 3.81 log CFU/g in autumn, 2.71 → 3.36 log CFU/g in winter. S. aureus exceeding the tolerance was detected even when the FCFs were stored in a vehicle trunk for 1 h in summer and autumn and 2 h in spring and winter. Among three boxes (corrugated box, styrofoam box, and corrugated box coated with an aluminum film), the styrofoam box maintained the lowest temperature and showed the lowest growth rate of microorganisms on FCF after storage for 3 h in the vehicle trunk depending on whether ice was added. These results indicated that the possibility of food poisoning occurs when FCFs are exposed to the external environment. It is necessary to provide guidelines regarding storage temperature and allowable time for safe consumption of FCFs after purchase.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.4
• /
• pp.269-276
• /
• 2008

Background: Although the prevalence of tuberculosis infections (PTBI) is one of the basic epidemiologic indices, no survey has been carried out since 1995 because the nation-wide tuberculosis prevalence survey was changed to a surveillance system. Subjects without a BCG scar are examined in a tuberculin survey. However, it is very difficult to select these subjects under high vaccination coverage. It is important to evaluate the impact of BCG vaccinations on the tuberculin response and estimate the PTBI regardless of the BCG vaccination status. Methods: A nation-wide, school-based cross-sectional tuberculin survey was carried out among first graders in elementary school in 2006. A total of 5,148 children in 40 schools were selected by quota sampling. Tuberculin testing with 0.1 ml of two tuberculin units of PPD RT23 was carried out on 4,018 children. The maximum transverse diameter of induration was measured 48 to 72 hours later. The presence of a BCG scar was checked separately. Results: There were no BCG scars in 6.3% of the subjects. The mean induration size of tuberculin testing was $3.7{\pm}4.4mm$, which included 1,882 (46.8%) subjects with an induration size of 0 mm. The PTBI was 10.9% (439 subjects) using a cut-off point of ${\geq}10mm$ (conventional method). The annual risk of tuberculosis infections (ARTI) was 1.9% when the mean age of the subjects was assumed to be 6 years. There was no difference in the PTBI according to the presence or absence of a BCG scar [11.2% vs 7.6% (OR: 1.54, 95% CI: 0.98~2.43)]. Using a mirror image technique with 16 mm as the cut-off point, the PTBI and ARTI had decreased to 2.4% and 0.4% respectively. Conclusion: PTBI and ARTI, as estimated by conventional methods, appear to be high among BCG vaccinated children. A mirror image technique is more suitable for estimating the indices in a country with an intermediate burden of tuberculosis than the conventional method.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.153-159
• /
• 2007

To investigate requirements for the process of credit bank system in life-long education institutions attached to colleges, this research was conducted with seniors at the departments of dental hygiene and dental laboratory technology, in the health line of the specific College from March 26 to April 15, 2007, followed by analysis using an SPSS/WIN 12.0 program, obtaining the following results. 1. 89.7% of the respondents had a plan to take a bachelor's degree and 56.1% of whom had such a plan for the purpose of personal development (p<0.05). 2. 73.5% of the respondents preferred the credit bank system in a lifelong education institution attached to a college to take a bachelor's degree. 3. 34.8% presented the greatest advantage of taking a bachelor's degree through the credit bank system that they could take a degree in a short period of time while 33.8% presented the most serious disadvantage that they might low social recognition. 4. As for requirements for the process of operating the credit bank system, 80.3% regarded required subjects for the major as appropriate basic ones. 79.9% regarded it as proper that filling more than 20 credits made it possible to take a degree. 5. As directions for improving the system, it was found that the students was thinking that strict academic record management is needed, and the degrees from the system must be recognized equally to those in regular colleges, social awareness in those degrees should be enhanced, and also credits assigned to cultural subjects should be reduced, and the limitation in the number of credits being able to be obtained in one center should be removed.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.325-334
• /
• 1995

The early senescence mutant induced from Gihobyeo by $\gamma-ray$ irradiation was determined. The mutated gene expression was identified with comparing the characteristic of original cultivar. The mutant had so similar the morphological characteristics to original cultivar that it couldn't be distinguished until senescence occurred at about 20 days after heading. Suddenly yellow leaves were observed within a few days due to great decreases in total chlorophyll and various carotenoid contents. Transmission electron microscopy showed the formation of starch granules, distortion of fine structure of leaf cell organelles, especially grana structures, and the decrease in grain filled after senescence occurred. But banding patterns of total proteins and isozymes have not show any differences, The early senescence mutant will be very useful for study material not only on physiological and biochemical properties of plant senescence but also on gene expression regulating senescence which gives great influence on yield potential and its stability.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.113-135
• /
• 2004

This paper defines appraisal items and weights of the items for the purpose of developing an appraisal instrument that objectively measures employee's effectiveness of knowledge contribution. Deductive research is used for the development of appraisal items and delphi method for the development of weights of the items. In the deductive research the term, "effectiveness of knowledge contribution" is first defined. Then knowledge contribution activities are classified as "dimension of explicit contribution" and " dimension of tacit contribution" due to the characteristics of knowledge. Each dimension is divided again by components. The dimension of explicit contribution is divided according to the content of knowledge, and the dimension of tacit contribution is divided according to the extent of tacitness of knowledge contribution. The total components of dimensions are 7. The dimension of explicit contribution is composed of factual knowledge and procedural knowledge. The factual knowledge is made up of "procedural knowledge outcome" and "other factual knowledge". The procedural knowledge is made up of "procedural knowledge manual" and "lessons-learned procedural knowledge". The dimension of tacit contribution is composed of "agency", "model" and "Q&A". The basic framework for measuring 7 components of knowledge contribution is quantitative and qualitative approach. This paper is premised on the assumption that the outcomes of employee's knowledge contribution activities are recorded in the knowledge management systems in order to evaluate them objectively. The appraisal items are defined as follows: at the dimension of explicit contribution, in quantitative approach, "the upload number" or "performance number", and in qualitative approach, other employee's "referred number" and other employee's "content and format satisfaction evaluation"; at the dimension of tacit contribution, "demanded number of performance" After the development of appraisal items by the deductive method, delphi method was used for the analysis of the weights of the items with the total degree of knowledge contribution, 100. This research does not include the standard marks of the appraisal items. It is because when companies apply this appraisal instrument, they could use their own standard appraisal marks of the appraisal items considering their present situations and companies' goals. Through this almost desert-like research about the appraisal instrument of employee's knowledge contribution effectiveness, it proposes a cornerstone in the research field of appraisal instrument, which provides a standard for employee's knowledge contribution appraisal, and appraisal items that make organizational knowledge to be managed more systemically in business sites.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.300-306
• /
• 2010

Purpose : Recent changes in the population structure of Korea, such as rapid decline in birth rate and exponential increase in old-aged people, prompted us to prepare a new health improvement program in children and adolescents. Methods : We reviewed current health screenings applied for children and adolescents in Korea and other developed countries. We collected and reviewed population-based data focused on mortality and morbidity, and other health-related statistical data. We generated problem lists in current systems and developed new principles. Results : Current health screening programs for children and adolescents were usually based on laboratory tests, such as blood tests, urinalysis, and radiologic tests. Almost all of these programs lacked evidence based on population data or controlled studies. In most developed countries, laboratory tests are used only very selectively, and they usually focus on primary prevention of diseases and health improvement using anticipatory guidance. In Korea, statistics on mortality and morbidity reveal that diseases related to lifestyle, such as obesity and metabolic syndrome, are increasing in all generations. Conclusion : We recommend a periodic health screening program with anticipatory guidance, which is focused on growth and developmental surveillance in infants and children. We no longer recommend old programs that are based on laboratory and radiologic examinations. School health screening programs should also be changed to meet current health issues, such as developing a healthier lifestyle to minimize risk behaviors—or example, good mental health, balanced nutrition, and more exercise.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1076-1087
• /
• 2006

The purpose of this study was to identify critical control points of service encounter by types of restaurants in order to manage moment of truth when customers encounter services. Questionnaires were collected from 812 customers (aged 15 years or older) who had used restaurants in Seoul, from October 24, 2005 to November 6, 2005. The main results of this study were as follows: Statistically significant differences were shown between importance and performance of interaction quality, physical environment quality and outcome quality. Significant differences were also shown in importance and performance of interaction and physical environment quality, and performance of outcome quality by restaurant types but no significant difference was indicated in importance of outcome quality by restaurant types. That is, the importance of outcome quality, which means the quality of food, was regarded as important by customers who use restaurants regardless of types of restaurants. The result of examining interaction quality showed that family restaurants managed waiting customers quite well and provided information on the Internet homepage. Performance of responding to customers with complaints was rated the highest in family restaurants. Regarding physical environment quality, importance and performance scores significantly differed by types of restaurants in order of fine-dining restaurants, family restaurants, and fast-food restaurants. In terms of service encounter quality, items whose importance scores were high but performance scores were low in importance-performance analysis matrix were 'quality of provided food is always uniform' and 'the space between other tables is enough' for fine-dining restaurants. In family restaurants, 'size of chairs or tables is enough', and 'the space between other tables is enough' were included in the items, while 'interior facilities are attractive', 'size of chairs and tables is enough', and 'the space between other tables is enough' were included in the items in case of fast-food restaurants. A difference was indicated depending on types of restaurants.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.441-445
• /
• 2005

Researches on estimating national-scaled forest biomass are being carried out to quantify the carbon stock of forests with the Kyoto Protocol. In general, estimates of national-scaled forest biomass are based on forest inventory data which provides estimates of forest area, stem volume, and growth of stem by age classes. Estimates of forest biomass are, however, obtained by converting stem volumes to dry weight with stem density and thereafter to whole tree biomass with biomass expansion factors (ratios of whole tree dry weight to stem dry weight). Pinus densiflora is widely distributed and one of the most economically important timber species in Korea. The species are largely grouped into two ecotypes of Geumgang and Jungbu. Stems of Geumgang type trees are straight and high compared to those of Jungbu type trees. The objective of this study was to determine and compare stem density and biomass expansion factors fore two ecotypes of Pinus densiflora according to stand age. Stem density of both ecotypes of Pinus densora increased and biomass expansion factors of them decreased with increasing tree age. In he same age class, stem density and biomass expansion factor of Geungang type Pinus densiflora were lower than those of Jungbu type Pinus densiflora. There were statistically significant differences in stem density and biomass expansion factors between Geumgang type and Jungbu type Pinus densiflora in 0-20-year-old stands and 40-60-year-old stands. Our results suggested that the reliability of the national forest biomass inventory could be improved by applying the ecotype- and age-dependent stem density and biomass expansion factors.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.202-209
• /
• 2004

Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed radiation energy. The visible light photons are converted into electric signal in the amorphous silicon photodiodes which constitute a two dimensional array. In order to produce good quality images, detailed behaviors of DR detectors to radiation must be studied. The relationship between air exposure and the DR outputs has been investigated in many studies. But this relationship was investigated under the condition of the fixed tube voltage. In this study, we investigated the relationship between the DR outputs and X-ray in terms of the absorbed energy in the detector rather than the air exposure using SPEC-l8, an X-ray energy spectrum model. Measured exposure was compared with calculated exposure for obtaining the inherent filtration that is a important input variable of SPEC-l8. The absorbed energy in the detector was calculated using algorithm of calculating the absorbed energy in the material and pixel values of real images under various conditions was obtained. The characteristic curve was obtained using the relationship of two parameter and the results were verified using phantoms made of water and aluminum. The pixel values of the phantom image were estimated and compared with the characteristic curve under various conditions. It was found that the relationship between the DR outputs and the absorbed energy in the detector was almost linear. In a experiment using the phantoms, the estimated pixel values agreed with the characteristic curve, although the effect of scattered photons introduced some errors. However, effect of a scattered X-ray must be studied because it was not included in the calculation algorithm. The result of this study can provide useful information about a pre-processing of digital radiography.