• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.171-182
• /
• 2018

We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.334-346
• /
• 2022

There is a lack of knowledge and information on the understanding and application of the Process Safety Management (PSM) system, recognized as a major cause of industrial accidents in small-and medium-sized workplaces. Hence, it is necessary to prepare a protocol to secure the practical and continuous levels of implementation for PSM and eliminate human errors through tracking management. However, insufficient research has been conducted on this. Therefore, this study investigated and analyzed the various violations in the administrative measures, based on the regulations announced by the Ministry of Employment and Labor, in approximately 200 small-and medium-sized PSM workplaces with fewer than 300 employees across in korea. This study intended to contribute to the prevention of major industrial accidents by developing a facility maintenance web program that removed human errors in small-and medium-sized workplaces. The major results are summarized as follows. First, It accessed the web via a QR code on a smart device to check the equipment's specification search function, cause of failure, and photos for the convenience of accessing the program, which made it possible to make requests for the it inspection and maintenance in real time. Second, it linked the identification of the targets to be changed, risk assessment, worker training, and pre-operation inspection with the program, which allowed the administrator to track all the procedures from start to finish. Third, it made it possible to predict the life of the equipment and verify its reliability based on the data accumulated through the registration of the pictures for improvements, repairs, time required, cost, etc. after the work was completed. It is suggested that these research results will be helpful in the practical and systematic operation of small-and medium-sized PSM workplaces. In addition, it can be utilized in a useful manner for the development and dissemination of a facility maintenance web program when establishing future smart factories in small-and medium-sized PSM workplaces under the direction of the government.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.93-108
• /
• 2014

To support business decision making, interests and efforts to analyze and use transaction data in different perspectives are increasing. Such efforts are not only limited to customer management or marketing, but also used for monitoring and detecting fraud transactions. Fraud transactions are evolving into various patterns by taking advantage of information technology. To reflect the evolution of fraud transactions, there are many efforts on fraud detection methods and advanced application systems in order to improve the accuracy and ease of fraud detection. As a case of fraud detection, this study aims to provide effective fraud detection methods for auction exception agricultural products in the largest Korean agricultural wholesale market. Auction exception products policy exists to complement auction-based trades in agricultural wholesale market. That is, most trades on agricultural products are performed by auction; however, specific products are assigned as auction exception products when total volumes of products are relatively small, the number of wholesalers is small, or there are difficulties for wholesalers to purchase the products. However, auction exception products policy makes several problems on fairness and transparency of transaction, which requires help of fraud detection. In this study, to generate fraud detection rules, real huge agricultural products trade transaction data from 2008 to 2010 in the market are analyzed, which increase more than 1 million transactions and 1 billion US dollar in transaction volume. Agricultural transaction data has unique characteristics such as frequent changes in supply volumes and turbulent time-dependent changes in price. Since this was the first trial to identify fraud transactions in this domain, there was no training data set for supervised learning. So, fraud detection rules are generated using outlier detection approach. We assume that outlier transactions have more possibility of fraud transactions than normal transactions. The outlier transactions are identified to compare daily average unit price, weekly average unit price, and quarterly average unit price of product items. Also quarterly averages unit price of product items of the specific wholesalers are used to identify outlier transactions. The reliability of generated fraud detection rules are confirmed by domain experts. To determine whether a transaction is fraudulent or not, normal distribution and normalized Z-value concept are applied. That is, a unit price of a transaction is transformed to Z-value to calculate the occurrence probability when we approximate the distribution of unit prices to normal distribution. The modified Z-value of the unit price in the transaction is used rather than using the original Z-value of it. The reason is that in the case of auction exception agricultural products, Z-values are influenced by outlier fraud transactions themselves because the number of wholesalers is small. The modified Z-values are called Self-Eliminated Z-scores because they are calculated excluding the unit price of the specific transaction which is subject to check whether it is fraud transaction or not. To show the usefulness of the proposed approach, a prototype of fraud transaction detection system is developed using Delphi. The system consists of five main menus and related submenus. First functionalities of the system is to import transaction databases. Next important functions are to set up fraud detection parameters. By changing fraud detection parameters, system users can control the number of potential fraud transactions. Execution functions provide fraud detection results which are found based on fraud detection parameters. The potential fraud transactions can be viewed on screen or exported as files. The study is an initial trial to identify fraud transactions in Auction Exception Agricultural Products. There are still many remained research topics of the issue. First, the scope of analysis data was limited due to the availability of data. It is necessary to include more data on transactions, wholesalers, and producers to detect fraud transactions more accurately. Next, we need to extend the scope of fraud transaction detection to fishery products. Also there are many possibilities to apply different data mining techniques for fraud detection. For example, time series approach is a potential technique to apply the problem. Even though outlier transactions are detected based on unit prices of transactions, however it is possible to derive fraud detection rules based on transaction volumes.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.221-229
• /
• 2008

The three dimensional model method is widely applied in resource development for feasibility study, mine design, excavation planning and process management by constructing the database of various data in 3 dimensional space. Most of geophysical surveys for the purpose of engineering and resource development are performed in 2 dimensional line survey due to the restriction of the field situation, technical or economical situation and so on. The acquired geophysical data are used as the input for the 2 dimensional inversion under the 2 dimensional assumption. But the geophysical data are affected by 3 dimensional space. Therefore in order to reduce the error caused by 2 dimensional assumption, the 2 dimensional inversion result must be interpreted considering the additional information such as 3 dimensional topography, geological structure, borehole survey etc. The applicability and usability of 3 dimensional modeling method are studied by reviewing the case study to the geophysical data acquired in field of engineering and resource development.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.313-332
• /
• 2013

Large tundra of the Russian Empire, has rich resources and science and technology, and a huge domestic market potential is rapidly changing. Based on the abundant energy resources such as oil, gas, and minerals, as foreign trade is active, the huge capital is moving. And commitment the active SOC by improving laws and regulations and changes in the structure of the Russian economy. One of them pushed the WTO since 1993, 19 years to see fruition join the WTO (World Trade Organization). As the official entry into force August 22, Russia, July 10, 2012, Congress passed the treaty after joining the WTO and of the 156th WTO member countries, was officially join. As the WTO, Russia has the world's 11th-largest economy in the steel tariffs from 30% to 15% are exported to Russia, South Korea Car TV parts from 10% to 0%, reduced from 20% to 5% Korean export companies to export to Russia, etc., is expected to become the new land of opportunity. Russia hopes the changes improve the investment environment, the service industry, manufacturing revitalization the macroeconomic sectors of the economy through the WTO, and forecast, but the consumption increased revenue due to tariff cuts, falling import prices and the real economy, and weak manufacturing base. On the one hand, the perspective of concern. In conclusion, Russia joining the WTO, and the feed to improve the fairness and transparency of the market opening, the Russian advance in Korean companies be facilitated and strong complementary cooperation, especially in manufacturing is expected. In this paper, after Russia joining the WTO, trade liberalization, and ready for a new era of economic cooperation between Korea and Russia, at the point of expanding openness to propose strategies to analyze the problems of Korean companies during the Russian advance.

• Korean journal of communication and information
• /
• v.67
• /
• pp.152-176
• /
• 2014

Public opinion has dramatically shifted from positive to negative in Korea society especially since the IMF crisis. Such terms as 'aristocratic union', 'collectivism', 'damages on public interest' became a kind of conventional wisdom. Undoubtedly, media's representation has much to do with such a tantamount difference. This study thus attempts to understand the mechanism by analyzing media discourse related to labor strikes. For this purpose, this paper made a choice three cases including doctor-pharmacist dispute, general strike by truckers' solidarity, and Ssangyong Motor's strike. Total 217 editorial pieces of , and conceived to be a representative newspaper of ideological stance were analyzed. Research showed that while paying particular attention to demoralizing labor strikes, shed positive light on such disputes by articulating fundamental causes hampered by pro-capital policies along with anti-labor law enforcement. The believed to be relatively a neutral one showed ambivalent attitudes toward those cases. More favorable and inclusive reporting were found in accordance with policy shifts as well. Media's selective partisanship for the sake of private interests is firmly believed to downgrading credibility on Korean journalism. Also is fair, balanced and less biased reporting over socal disputes a vital part in crystallizing social consensus. In this consideration, the authors hoped this study to provide an opportunity to contemplate on what would be desirable journalistic values in modern democracy.

• International Commerce and Information Review
• /
• v.19 no.1
• /
• pp.155-187
• /
• 2017

In the US, the Sections 301 of the Trade Act of 1974 are still being used to resolve disputes. The U.S' such unilateral retaliations grounded on the Sections 301 of the Trade Act, in fact, violate the WTO agreements and hinder the development of international trade as the trade partner may assume it as a reprisal move impeding the fair settlement of disputes. Here, this study is going to examine the characteristics and functions of the WTO dispute settlement system briefly and compare the countermeasures recognized to be legitimate by the WTO with the U.S' unilateral retaliation. Also, this author will analyse the US-Japan Automobiles (DS6) and EC-Bananas III (DS27) as one of the typical cases resulted from the unilateral retaliation. According to the result, these cases do not conform to WTO-consistency, and it implies that it is absurd to accept the US' unilateral retaliation internationally. In conclusion, presently, it is a global trend to solidify protectionism, and to vitalize trade and resolve trade disputes efficiently, it is needed to prohibit the recourse to unilateral retaliations and also positively apply the WTO dispute settlement system(DSU) defining rules about how to strengthen the multilateral system.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.73-81
• /
• 2011

The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.433-457
• /
• 2011

This study attempts to make a constructive contribution to the debate on which WTO rules accommodate trade measures for environmental purposes. Does trade undermine the regulatory efforts of governments. However, the theoretical dimensions are partly addressed on the several key questions. For instances, is economic integration through trade and investment a threat to the environment? to control pollution and resource degradation? Will economic grow driven by trade help us to move towards a sustainable use of the world's environmental resources? The growing world economy has been accompanied by environmental degradation including deforestation, losses in bio-diversity, global warming, air pollution, depletion of the ozone layer, overfishing and so on. The sheer number of us obviously put pressure on natural resources and ecological systems, and this pressure will counting to rise as we grow towards 10 billion in the next century. What is more, there is no indication that consumption per capita is slowing. The perceived costs of acting alone in terms of lost investments and jobs often take the stream out of regulatory initiatives. In the worst case scenario environmental community is fearful that international trade will magnify the effects of poor environmental polices in the world Generally, economic growth drive by trade may speed up the process of environmental degradation unless sufficient environmental safeguards are put in place. Under these circumstances, this paper attempts to make a constructive contribution to the study on which WTO rules accommodate trade measures for environmental purposes.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.143-166
• /
• 2011

This paper describes the characteristics and outline of rules of origin among Korea and USA, EU, ASEAN. The main focus of this paper is to conduct comparative analysis on rules of origin. Rules of origin are used to determine the country of origin of a product for purposes of international trade. There are two common types of rules of origin depending upon application, the preferential and non-preferential rules of origin Non-preferential rules of origin are used to determine the country of origin for certain purposes. The basis for the non-preferential rules originates from the Kyoto convention which states that if a product is wholly obtained or produced completely within one country the product shall be deemed having origin in that country. For a product which has been produced in more than one country, the product shall be determined to have origin in the country where the last substantial transformation took place. To determine exactly what was the last substantial transformation, three general rules are applied : Change of tariff classification(on any level, though 4-digit level is the most common), Value added-rule.(ad-valorem), and Specific process rule. While criteria of wholly obtained or produced in one country is almost similar to those of theses area and countries, in compliance with value percentages of Substantial Transformation, sufficient working or processing, Korea-US FTA adapts 'Regional Value Content', meanwhile Korea-EU FTA adapts 'Import Content' rule. Finally, Korea-US FTA and ASEAN FTA adapt FOB price for the calculation value added, on the other hand Korea-EU FTA adapts EXW price.