• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.33-47
• /
• 2023

Under the "Act on Safety Control of Small Public Facilities (enacted in 2015)", each local government selects and conducts annual safety inspections for small public facilities. Among small public facilities, small bridges pose high risks and are heavily utilized by local residents, making them challenging to manage due to their large numbers and limited resources. Therefore, there is a need for a rational selection method that considers the management capacity of local governments, as well as the establishment of objective risk evaluation and maintenance planning for small hazardous facilities. In this study, we propose a selection method based on structural and functional classification of small bridges, considering the management capacity of local governments. Additionally, we present quantitative evaluation indicators for ten risk evaluation criteria, aiming to facilitate objective risk evaluation.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.41-48
• /
• 2020

This study performed a quantitative risk assessment for hydrogen-CNG complex refueling stations. Individual and societal risks were calculated by deriving accident scenarios that could occur at hydrogen and CNG refueling stations and by considering the frequency of accidents occurring for each scenario. As a result of the risk assessment, societal risk levels were within the acceptable range. However, individual risk has occurred outside the allowable range in some areas. To identify and manage risk components, high risk components were discovered through risk contribution analysis. High risks at the hydrogen-CNG complex refueling station were large leakage from CNG storage containers, compressors, and control panels. The sum of these risks contributed to approximately 88% of the overall risk of the fueling station. Therefore, periodic and intensive safety management should be performed for these high-risk elements.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.23-28
• /
• 2007

Damage ranges of accidents of the chemical facilities were estimated by the KS-RBI(Ver.3.0) program supporting the quantitative cause analysis, and the consequences were compared with the results of K-CARM(Ver2.0) program which assesses the quantitative risk in an usual method. As a result we found that the consequences of the KS-RBI program were similar to those of the K-CARM program. Therefore, the KS-RBI program could be applied to the quantitative risk assessment. In addition, it can be safely said that through appling the damage ranges of accidents by weighted average, industrial sites can come up with the effective plans of mitigation and emergency.

• Journal of the Korean Institute of Gas
• /
• v.10 no.1 s.30
• /
• pp.13-18
• /
• 2006

Chemical plants should perform Quantitative Risk Assessment that evaluates types of accident, frequency and damage which can happen through using the hazardous equipment and the hazardous materials for preventing and preparing industrial disasters. It is necessary that Chemical plants should include the reliability database which efficiently evaluate the Quantitative Risk Assessment. So in this study, we suggest a which methodology applies Quantitative Risk Assessment on the basis of the constructed data to imply the reliability of industrial facilities and equipment, collection of reliability data, system analysis and development of software.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2012

In terms of the maritime accident prevention, risk analysis at targeted warterways is important for planning safety waterways. This paper analyzes the maritime accidents probability in the Mokpo waterways, South Korea, based on the IWRAP(IALA Waterway Risk Assessment) of the quantitative accident probability tool. Vessel collision probability cate is calculated by vessels meeting direction, using IWRAP. This paper contribute to advance improvement of vessel traffic service by VTS sector providing vessel fairway risk data.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.143-150
• /
• 2017

Previous methods to evaluate the risk of dropped objects rely on personnel experience of the engineer or operator without analyzed data. However analyzing historical statistic data is the best approach to find the safest operation route and to achieve more reasonable and reliable calculation results. By counting the failure frequency and fatal accident rate the risk can be quantified, and so controlled or mitigated with best economical risk reducing measures. This analysis gives a crane operator with useful information for selecting the best crane operation route, and a designer with an estimation of risk level for the dropped objects from a safety point of view.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.467-474
• /
• 2014

Preliminary design in chemical process furnishes economic feasibility through calculation of both mass balance and energy balance and makes it possible to produce a desired product under the given conditions. Through this design stage, the process possesses unchangeable characteristics, since the materials, reactions, unit configuration, and operating conditions were determined. Unique characteristics could be very economic, but it also implies various potential risk factors as well. Therefore, it becomes extremely important to design process considering both economics and safety by integrating process simulation and quantitative risk analysis during preliminary design stage. The target of this study is LNG liquefaction process. By the simulation using Aspen HYSYS and quantitative risk analysis, the design variables of the process were determined in the way to minimize the inherent explosion risks and operating cost. Instead of the optimization tool of Aspen HYSYS, the optimization was performed by using stochastic optimization algorithm (Covariance Matrix Adaptation-Evolution Strategy, CMA-ES) which was implemented through automation between Aspen HYSYS and Matlab. The research obtained that the important variable to enhance inherent safety was the operation pressure of mixed refrigerant. The inherent risk was able to be reduced about 4~18% by increasing the operating cost about 0.5~10%. As the operating cost increases, the absolute value of risk was decreased as expected, but cost-effectiveness of risk reduction had decreased. Integration of process simulation and quantitative risk analysis made it possible to design inherently safe process, and it is expected to be useful in designing the less risky process since risk factors in the process can be numerically monitored during preliminary process design stage.

• 방재와보험
• /
• s.70
• /
• pp.29-31
• /
• 1996

• Fire Science and Engineering
• /
• v.10 no.4
• /
• pp.29-36
• /
• 1996

The hazard assessment in which the potential hazard factors in the buildings are investigated and the scale of the hazard is analyzed should be performed first in order to prevent personal and material damages due to building fire. In this study, the building fire hazard are assessed using 822-item checklist, for the qualitative evaluation of which the main factors are classified into 10 items, yielding 100 scale points with some weighting. It is shown that present model is applicable for the assessment of all general buildings through the examination of the suitability of assessment model by actual assessment of existing building. Also, the checklist is prepared in itemized questionnaire form for easy assessment of building fire hazard. Therefore, the present model will be helpful for those working in fire prevention, who are suffering from the lack of manifest evaluation model for the fire prevention assessment so far in Korea.

• Journal of Korean Society of societal Security
• /
• v.1 no.3
• /
• pp.69-76
• /
• 2008

The object of this study is to develop a tool for quantifying risks related to the rail transportation of hazardous commodities and to present mitigation measures. In this study, the Quantitative Risk Assessment (QRA) is used as a risk analysis tool. Based on the previous explosion history (Iri explosion) and consideration of its high risk, Iksan-si is selected as a model city. The result, expressed as average individual risk for exposed people with various distance, indicates that the model city is considered to be safe according to the nuclear energy standard. Also, the mitigation measures are provided since Societal risk of Iksan-si is set within ALARP. Risk reduction measures include rail car design, rail transportation operation, demage spread control as well as derail prevention and alternative routes for reducing accident frequencies. Finally, it is expected to achieve high level of public safety by appling the risk reduction measures.