• Journal of Hospice and Palliative Care
• /
• v.3 no.2
• /
• pp.144-151
• /
• 2000

Purpose : This investigation was to identify the relationship of social support, stress, health and quality of life in caregivers of home-stay cancer patient. Method : We used a questionnaire and obtained data from the records of 79 caregivers of home-stay cancer patient in a community. Window SPSS-PC was used for the data analysis and the statistical method used were the t-test, ANOVA and Pearson's correlation coefficient. Result : The mean score of family support(3.24) was higher than nurse's support(3.03). The mean score of stress was 3.52 and that of health status was 2.98. The mean score of quality of life was 2.34. The health status of caregivers of cancer patient was influence by age(F=3.17, p=0.018) and education(F=3.59, p=0.032). There was a correlation between nurse's support and family support(r=.263, p<0.05). There was a correlation between stress and health status(r=0.597, p<0.01). The quality of life was correlated with stress(r=-.678, p<0.01) and health status(r=-0.741, p<0.01). Conclusion : The above result indicate that we must consider of social support, stress and health status to promote of quality of life of the caregiver of cancer patient.

• Journal of the Korean Society of Radiology
• /
• v.8 no.3
• /
• pp.105-110
• /
• 2014

Diagnostic radiation equipment diagnosis and treatment of disease of recent plays a central role, but this is based on the assumption of an appropriate balance of benefits and risks of diagnostic. If balance is not maintained has the potential to give an adverse effect on the health of the public. In the case of an overseas, the importance of (QA) quality assurance of medical equipment is growing, but evaluation criteria of quality assurance has not been clearly presented in domestic. Therefore, the modernization of medical equipment from the point at which the degree of cycle-by-cycle management system of foreign national to be suitable for diagnostic radiation generator entry and quality control standards by introducing a tailoring is necessary. In this study the most frequently used diagnostic radiation generator X-ray imaging apparatus of the general three-year periodic inspections at any time between the periodic inspection items and quality control methods and standards for the establishment of the United States, Canada and abroad, and international electronic literature search Technical Committee (International Electro-technical Commission, IEC) were compared with the provisions of item. Based on the national quality control items when opening frequent inspection items and standards presented as a basis for setting up study.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.57-69
• /
• 2009

This study was conducted the physicochemical and sensory characteristics of fish paste with yam powder(0~5%). The pH of the samples ranged from 6.89 to 7.02, and moisture content ranged from 79.53 to 80.44%. Increasing the amount of yam powder in the fish paste tended to decrease the lightness(L) in Hunter color value while increasing the redness(a) and yellowness(b). For the textural characteristics, the addition of yam powder increased strength, gumminess, cohesiveness and springiness. Fish paste with 3~5% yam powder had good flexibility and wasn't broken even after 4 times folds. In sensory evaluation, the addition of 2% yam powder had the best score in color, taste and overall preference. Therefore, this results suggest that 2% yam powder can be applied to fish paste for the purpose of high quality, preference and functionality.

• Culinary science and hospitality research
• /
• v.17 no.3
• /
• pp.181-190
• /
• 2011

This study analyzed the quality characteristics of the Sansapyun products, which were manufactured by mixing with 0, 5, 10, 20, and 30% of Crataegi fructus concentrate and 9% of mung bean starch. The moisture content and pH in Sansapyun decreased significantly(p<0.001) as the concentration of Crataegi fructus concentrate increased. Sweetness increased as the amount of Crataegi fructus concentrate increased in both Before/After cases. As for the L value of the color characteristics of Sansapyun, it turned out that the control group, which had 0% of Crataegi fructus concentrate, was higher. Meanwhile, the a and b values were the strongest with 30% of Crataegi fructus concentrate. As the concentration increased, the hardness, springiness, chewiness, gumminess, cohesiveness all decreased significantly(p<0.001), while adhesiveness became higher as the concentration increased. The preference test showed that the increase of the concentration resulted in the increase of red color, fruity flavor, sour flavor, Chinese (herb) medicine flavor, sour taste, sweetness, Chinese (herb) medicine taste, stickiness, and aftertaste. However, the sleekness, transparency, hardness and springiness decreased as the concentration increased. The survey on the preference showed that the preferences for flavor, taste and overall preference were the highest at the 10% sample group, but the preferences for color and texture were the highest at the 20% sample group.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.41-55
• /
• 1991

A study was done to investigate characteristics of the land and sea breeze over Cheju island on the basis of surface meteorological data collected from 1977 to 1986. The results are summarized as follows: The frequency of the land and sea breze was highest in August followed by September, October, May and November in descending order. This indicates that the frequency of the land and sea breeze is higher in fall than in spring, and lowest in winter. The sea breeze began much earlier than any other regions of Korea all the year round, and it began about 30 minutes earlier and ended one hour later in the northern coast than in the southern coast of Cheju island. Meanwhile, the land breeze began about one hour earlier in the southern coast than in the northern coast and ended almost at the same time in both coasts. The annual mean duration of the sea breeze was about one hour longer in the northern coast than in the southern coast, but the land breeze showed an opposite trend. The duration of the sea breeze was longer in summer than in winter and again the land breeze was opposite. Transition period from the sea to the land breeze was relatively long in summer and shout in winter, but transition period from the land to the sea breeze was not different between seasons. The time for a maximum velocity of the sea breeze came earlier in the southern coast than in the northern coast, but that of the land breeze came almost at the same time in both coasts with no seasonal variations. Monthly mean maximum velocity of the sea breeze was greater than that of the land breeze.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1929-1933
• /
• 2008

조석에 의한 지하수위변동이 발생하는 해안가 암반대수층에서 고조(high tide)과 저조(low tide) 조건에서의 차이를 규명하기 위한 양수시험이 수행되었다. 본 연구에서 양수시험이 수행된 시험대 수층은 암반층으로서 시험공들은 해안가에서 약 180 m 이격되어 있으며, 양수정(MW1공)과 관측정(MW2공)의 이격거리는 8.05 m 이다. 양수정과 관측정 모두 공 내경은 0.205 m 이며, 케이싱심도는 지표면하 19 m 정도이다. 그리고, 양수정과 관측정의 지하수위는 지표면하 5 m 정도에 형성 되어 있으며, 시험대수층의 두께는 약 40 m 정도이다. 양수시험은 총 3회 수행되었으며, 모든 시험에서 수중모터 설치심도는 지표면하 30 m 이고 양수율은 $75\;m^3/day$로서 동일하였다. 그러나, 양수시작 시간의 차이를 두어 고조 후 1회(1차 시험), 저조 후 2회(2차 및 3차 시험) 수행되었다. 양수정과 관측정에서 자동수위측정기(Model 3001, Solinst)를 설치하여 관측된 지하수위변동 자료에 의하면, 조석현상 발생 후 시험공 내 지하수위변동 경과시간은 고조(high tide) 후 2시간, 저조 (low tide) 후 1시간 정도인 것으로 나타났다. 따라서, 양수시험 시 1차 시험은 고조 후 2시간 경과한 시점에서, 2차 및 3차 시험은 저조 후 1시간 경과한 시점에서 양수가 시작되었다. 양수시험에 의한 경과시간에 따른 수위강하량 그래프에서는 고조조건이 저조조건에 비해 수위강하량이 더 적은 것으로 나타났다. 이러한 원인은 저조에 비해 고조 조건에서는 해수에 의한 지하수위가 상승하여, 동일한 양수조건에서 수위강하량이 적게 나타난 것이다. 양수시험 자료가 AQTESOLV 3.5 프로그램을 이용하여 해석되었다. Theis method에 의해 산정된 수리전도도는 고조 조건의 양수시험에서는 $4.159{\times}10^{-6}\;m/sec$, 저조 후에서는 각각 $3.818{\times}10^{-6}\;m/sec$와 $3.926{\times}10^{-6}\;m/sec$ 이었다. 저조 후에 비해 고조 후의 수리전도도가 5% 이상 높은 것으로 산정되었다. 이상의 연구 결과들에 의해, 해안가 암반대수층에서는 양수시험 시 조석효과에 의한 수리적인 변동을 고려한 설계와 해석이 수행되어야함을 확인할 수 있었다.

• Child Health Nursing Research
• /
• v.20 no.4
• /
• pp.294-303
• /
• 2014

Purpose: The purpose of this study was to identify the correlation of critical thinking disposition and problem solving process, and the simulation- based assessment of clinical competence based on a survey of college nursing students. Methods: In this descriptive correlation study, data for 214 nursing students were analyzed using t-test and Pearson correlation coefficients. Results: Critical thinking disposition, problem solving process, and simulation-based assessment of clinical competence averaged $3.76{\pm}0.46$ (out of 5), $3.67{\pm}0.47$ (5), and $1.51{\pm}0.17$ (2), respectively. A significant difference in scores for simulation-based assessment of clinical competence was found between the high-scoring group and low-scoring group in critical thinking disposition. A significant positive correlation was found between critical thinking disposition and nursing assessment, a sub-domain of clinical competence. Conclusion: The results suggest that success in simulation-based learning requires critical thinking disposition in the nursing students, and their critical thinking disposition plays a positive role in nursing assessment, which evaluates the patient's status in a complex situation. Simulation-based learning programs help assess the students' levels in their clinical judgement and performance, and identify their strengths and weaknesses so that the instructor can evaluate and improve the current teaching method.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.79-79
• /
• 2010

저온용 무연 솔더의 대표 조성으로 고려되고 있는 Sn-58Bi(융점: $138^{\circ}C$) 공정(eutectic) 조성은 우수한 강도에도 불구하고 연성(ductility) 측면에서의 문제점이 지속적으로 보고되고 있다. 따라서 이 합금계의 연성을 최대로 개선시킬 수 있으면서도 실제 상용화가 가능한 합금 조성의 개발 연구가 요청된다. 본 연구에서는 Sn-Bi 2원계 조성에서 최대의 연성을 나타내는 것으로 보고된 Sn-40Bi 조성에 미량의 합금원소를 첨가함으로써 최대의 연성을 확보하는 한편, 그 연성 특성이 변형속도에 어느 정도 민감한지를 인장 실험을 통해 결정하고자 하였다. 합금원소로는 0.1~0.5 wt%의 Ag, Mn, In, Cu를 선택하였으며, 인장 시편을 제조하여 $10^{-2}$, $10^{-3}$, $10^{-4}\;s^{-1}$의 3종류로 변형속도를 변형시켜가며 응력-변형 곡선(stress-strain curve)을 측정하였고, 조성별, 변형속도별로 최대인장강도(ultimate tensile stress, UTS) 및 연신율 결과들을 정리하였다. 합금원소를 첨가한 조성의 경우는 모든 시험 조건에서 Sn-40Bi보다 우수한 연신률을 나타내는 것으로 측정되었으나, $10^{-2}\;s^{-1}$의 빠른 변형속도에서는 그 향상 정도가 상대적으로 감소하는 경향이 관찰되었다. 특히 Sn-40Bi-0.5Ag 조성의 경우 느린 변형속도에서 특히 눈에 띄는 연신률 값을 나타내며, 모든 변형속도 조건에서 가장 우수한 연성을 나타내었다. 한편 Sn-40Bi-0.1Cu 조성의 경우 변형속도에 따른 연신률의 변화 정도, 즉, 변형속도에 따른 연신률의 민감도가 매우 커 $10^{-4}\;s^{-1}$ 속도에서는 Sn-40Bi-0.5Ag에 버금가는 연신률 값이 측정되었으나, $10^{-2}\;s^{-1}$ 속도에서는 가장 나쁜 연신률 특성을 보여주었다. Sn-40Bi-0.2Mn 조성은 최고의 연신률 향상 특성을 나타내지는 않았으나, In을 첨가한 경우보다는 대체적으로 우수한 연성을 나타내었다. 이상의 각 합금별 연성 특성은 인장시험 전의 미세조직 관찰 결과와 인장시험 후 파면부의 조직변화 관찰 결과로부터 해석되었다. 그 결과 석출상의 형성 여부, 인장 시험 중 재결정 조직의 형성 여부, 라멜라(lamellar) 조직의 분율과 라멜라 간격(lamellar spacing)의 정도 또는 $\beta$-Sn과 라멜라 조직 사이의 결정립계와 라멜라 조직 내 결정립계에서의 슬라이딩 모드(sliding mode) 변형 정도, 석출상의 크기와 분포 정도 등이 연신률 및 변형속도 민감도와 같은 연성 특성에 가장 큰 영향을 미치는 인자인 것으로 분석되었다.

• Clinics in Shoulder and Elbow
• /
• v.2 no.2
• /
• pp.187-198
• /
• 1999

Purpose: The authors compared the results of Ender nailing for the proximal humerus fractures with those of the conservative methods radiographically. Materials and Method: Nine patients(mean age: 69 years.) received Ender nailing, and the other nine patients, conservative treatments(mean age: 73 years). All fractures were 2 part fractures. The Ender nails were inserted either through posterior elbow approach or transepicondylar approach. A simple Velpeau bandage was applied to the conservative treatment group. The average follow-up was 15 months. Results: The initial status of the anatomical reduction, i.e., the values of the medial shift, overlapping and the varus agulation, were little changed at follow-up radiographs in both the Ender nailing group and the conservative treatment group. There was no significant difference for the status of anatomical reduction between the Ender nailing group and the conservative treatment group. The stability of fixation by Ender nails, i.e., the degree of fanning out of the nails was poor in most cases. Not a few problems/complications happened in cases of Ender nailing group; back­ing out of the nail in three cases, penetration of the nails into the humeral heads in 3, fractures or cracking of the humerus around the nail insertion area in 4 and reduction loss in one. Conclusion: We could not get better results with the use of Ender nail. We use no longer Ender nails for the proximal humerus fractures. Further studies are needed for the better option for the proximal humerus fractures.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.196-201
• /
• 2020

In order to increase the durability of the pipe framed greenhouse, galvanized steel pipes with four corrosion protection treatments were installed in the greenhouse. After 20 years, experiments on surface corrosion and strength change were conducted. Control (untreated) pipes exposed in the atmosphere showed a 1.3% reduction in strength, but little difference from other treatments. The strength of heavy protective coating pipes buried in the ground decreased by 0.6%, showing little change, but untreated pipes decreased by 15.7%. And antirust paint and asphalt coating pipes decreased by 4.2~4.4%. Pipes exposed in the atmosphere did not show severe corrosion in all samples. There was no change in heavy protective coating pipes, and no rust was found in antirust painting pipes either and there was only slight discoloration. Asphalt coating pipes discolored black and some rust was found, and untreated pipes were rusted by 20~30% of the surface. However, untreated pipes buried in the ground were completely rusted, and asphalt coating pipes were rusted by 80~90% of the surface. Antirust painting pipes were rusted by 20~30%, and heavy protective coating pipes did not change almost. The heavy protective coating treatment showed a clear corrosion protection effect even in the parts buried in the ground, and the antirust painting treatment also showed some corrosion protection effect. Therefore, it is judged to be applicable to the field of pipe framed greenhouses.