• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.161-172
• /
• 1997

In this paper, electromagnetic scattering by a perfectly conducting strip grating on dielectric multilayers is analyzed for the normalized reflected and transmitted power by applying the Fourier-Galeakin moment method. The induced current density is expanded in a series of multiplication of chebyshev polynomials of the first kind and functions with appropriate edge boundary condition, the continuous condition of electromagnetic field is applied in the boundary planes. The confirm the validity of the proposed method, the nor- malized reflected and transmitted power obtained by varying the relative permittivity and thickness of each dielectric layers are evaluated and compared with those of the existing numerical method and a paper, and then the numerical results in this paper are in good agreement with those of the existing numerical method and the paper. The sharp variation position in the geometrically normalized reflected and transmitted power can be moved by the incident angle, grating period, and the relative permittivity and thickness of the dielectric multilayers, these sharp variation points which are called the Wood's anomaly of the Geome- trically normalized reflected power are observed as a main factor when the reflected powers of the higher order mode are transitted between propagating and evanescent modes, and the local minimum positions are slightly moved to the left hand direction in which grating period is getting small according to the increase of the relative permittivity of dielectric layers.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.365.2-365
• /
• 1999

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.457-460
• /
• 2003

DC억압능력이 없거나 부족한 코드에 만족할 만한 DC억압능력을 갖도록 하는 방법은 DC 제어 비트의 사용, Dual Code의 사용, Multimode Code의 사용 등이 있다. 어떤 방법이든 부가 비트가 사용되지만, 그 중에서 멀티모드 변조코드는 우수한 DC억압능력과 높은 코드효율을 갖고 있음에도 불구하고 복잡한 하드웨어와 높은 에러 전파율을 갖는 단점도 있다. 본 논문에서 제시하는 멀티모드 변조코드의 특징은 데이터열의 다중화를 위해 의사 스크램블 기법을, 다중화된 데이터열의 변조를 위해서는 DC-free RLL 변조코드를 사용한다. 의사 스크램블에 의한 데이터열의 다중화는 데이터를 복조할 때 에러전파 확률을 떨어뜨리는 효과가 있고 다중화된 데이터열의 변조를 위한 DC-free RLL 변조코드의 사용은 DC억압능력을 향상시키고 하드웨어가 훨씬 간단해진다.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.435-438
• /
• 2016

HEVC CABAC binary arithmetic decoder operates in three decoding modes i.e. regular, bypass, and termination modes, where their decoding operations and time differ a lot. Furthermore, when renormalization occurs, its internal feedback loop induces large delay. In this paper, a binary arithmetic decoder was designed to solve this problem. In advance, it checks all range values with possible renormalization. When renormalization occurs, it immediately updates range value and finishes all calculation in a cycle. When implemented in 0.18 um process technology, its maximum operating frequency and gate counts are 215 MHz and 5,423 gates, respectively.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2002

We have calculated the optimum refractive index and normalized thickness of a single layer antireflection coating on the facet of buried channel waveguides as a function of waveguide width for several waveguide depths using the angular spectrum method and field profiles obtained by the effective index method (EIM) and the variational method (VM), respectively, and discussed the results. In the area of large waveguide width, the optimum parameters of a single layer antireflection coating obtained by both methods are almost the same. However, as waveguide width decreases, the parameters obtained by the VM approach those of a single layer antireflection coating between cladding layer and air, while those obtained by the EIM do not approach those, and the difference between the two parameters is large. The tolerance maps of the quasi-TE and quasi-TM modes obtained by the VM for square waveguides are located in almost the same area regardless of refractive index contrast, while those obtained by the free space radiation mode (FSRM) method for refractive index contrast of 10% are located in the different area. Thus, we think that the tolerance maps obtained by the VM are more exact than those obtained by the FSRM method.

• 한국해양학회지
• /
• v.28 no.2
• /
• pp.114-120
• /
• 1993

Numerical method of nonlinear regression was introduced to characterize grain-size distribution more effectively than using the traditional textural parameters. This technique proved critical particularly to multimodal size distributions, as exemplified by samples from Cheju strait continental shelf. Grain-size analysis of samples collected from the Cheju Strait continental shelf reveals that 86% of the grain-size distributions are multimodal. As multimodal grain-size distribution deviates from the statistical (log) normal distribution, the grain-size parameters traditionally used in sediment studies do not describe the distribution efficiently. Therefore, the use of grain-size curves into elementary normal component curves was used. Means and standard deviations of 387 decomposed normal components were decided by a decomposition method (nonlinear least square regression) from 167 size curves of the Cheju Strait sediments. The mean values of decomposed normal components show peaks at 1-3 phi and 8-9 phi size classes. The plot of mean values of the coarse fraction normal components on the map shows a characteristic and complex areal distribution. On the basis of the areal distribution of the mean values of the components and that of isopach of total Plenipotence sediment, the areal distribution of layers composing a transgressive sand of Late Plenipotence age were revealed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.2
• /
• pp.57-64
• /
• 2007

This paper proposed the low power texture cache for mobile 3D graphics accelerators. It is very important to reduce the leakage power in the standby mode for mobile 3D graphics accelerators and the memory access latency of texture mapping in the active mode which needs a large memory bandwidth. The proposed structure reduces the leakage power using variable threshold values of power mode transitions according to the selected texture filtering algorithms of application programs, which has the run time gain for texture mapping. In the trace driven cache simulation the proposed structure shows the best 7% performance gain to the previous MSA cache according to the new performance metric considering both normalized leakage power and run time impact.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.53-59
• /
• 2003

Strain Energy Hinge(SEH) has been used in Korea Multi-purpose Satellite(KOMPSAT) series to deploy the solar panel due to the good record of reliability. However, when it reached a desired deployment position, a large buckling force is applied to the main body. This may cause structural damage and also affect control of the satellite. Therefore, reliable dynamic analysis for the deployment system is required at a design stage. Moreover, various mission of a satellite has made the size of solar panels got bigger, so elastic effect has to be considered seriously to get more precise analysis results. In this paper, a dynamic analysis method to predict the deployment is verified by KOMPSAT-2 deployment test.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1760-1762
• /
• 2010

본 논문에서 3치가산기와 승산기(multiplier)는 전류모드 CMOS에 의해서 구현된다. 첫째, 3치 T-gate를 집적회로 설계의 유효 가용성을 갖고 있는 전류모드 CMOS를 이용하여 구현한다. 둘째, 3치 T-gates를 이용해 회로가 유한체 GF (3)에 대하여 2변수 3치 가산표 (2-variable ternary addition table) 및 구구표 (multiplication table)가 실현되도록 구현한다. 마지막으로, 이러한 동작 회로들은 1.5 CMOS 표준 기술과 $15{\mu}A$ 단위전류(unit current) 및 3.3V 소스 전압 (VDD voltage)에 의해 활성화 된다. 활성화 결과는 만족할 만한 전류 특성을 나타냈다. 전류 모드 CMOS에 의하여 실행되는 3치가산기 및 승산기는 단순하며 와이어 라우팅(wire routing)에 대하여 정규적이고, 또한 셀 배열 (cell array)과 함께 모듈성 (modularity)의 특성을 갖고 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.122-133
• /
• 1998

This paper presents the static analysis, the modal analysis and the forced vibration analysis on engine structures to find out the structure-borne noise sources by finite element method. The deformation of engine structures under the maximum combu- stion gas force was calculated through the static analysis, and the resonance possibilities were predicted by the modal analysis which ascertains mode shapes and the corresponding frequencies of engine global and its major noise sources in engine surfaces were investigated with the forced vibration analysis by means of finding the transfer mobilities on engine surfaces due to the piston impact and the velocity levels due to the combustion in consideration of oil film stiffness and damping coefficients. Finally, the direction of engine structure-borne noise reduction can be estabilished by the above-mentioned analysis procedure and the reduction effect of cost on proto-type engine build-up is expected.