• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.451-455
• /
• 2003

최근 LCD제품은 고유한 특장인 경박단소가 요구되면서, 기존의 Back Light Unit(BLU) 로는 대응할 수 없는 사양으로 진화되고 있다. 기존과 동일한 설계개념으로 접근시에 시장에서 요구되는 중량, 두께, 휘도의 사양을 만족시킬 수 없으며, BLU의 주요광원인 CCFL(Cold Cathod Fluorescent Lamp)의 휘도 개선 또 한 한계에 다다르고 있다. 따라서 앞으로의 BLU 의 고성능화는 최적화, 고효율화로의 개발 전개가 예상되며, LCD의 고해상도에 따른 투과율 저하를 보상하기 위한 고품질 BLU의 개발이 시급한 상황이다. 본 연구에서는 이러한 BLU의 고효율화, 고품질화를 달성하기 위한 고성능 도광판 개발과 관련하여, 실물 제작에 앞서 광학시뮬레이션을 통한 이론적 접근을 수행하였다. 연구 결과, 상측에서 정각 $90^{\circ}$ 에 높이 $50{\mu}m$ 하측에서 정각 $80^{\circ}$ 높이 $28{\mu}m$일때 평균조도가 71.52W/m^2 구현됨을 알 수 있다. 이 결과를 바탕으로 통상의 인쇄 방식 도광판에 비해서 약 20% 정도의 휘도향상이 가능함을 알 수 있었다. 또한 차후 본 결과를 바탕으로 한 실물 제작을 통해 설계 시뮬레이션 결과와의 비교를 통해서 정확한 예측이 가능한 시스템을 구현함을 목적으로 하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.333-343
• /
• 2011

The yellow poplar is an appropriate species for the age of low carbon green growth, because its absorption rates of ozone is greatly excellent, and also the absorption rates of carbon dioxide causing climate changes is very remarkable. The yellow poplar, which is a kind of rapid growth tree, shows a lack of performance as a structural member, however, it is suitable to use a variety of purposes like furniture materials, interior materials, plywood materials, and so on. In this study, the structural size skin-timbers were made by using the yellow poplar, and the compressive capacity was evaluated, also the numerical model was developed for the various uses. The rectangular shape skin-timber presented a good performance by showing 56.3% residual strength about the solid material. In case of the cylinder shape skin-timber showed a possibility to use diversely as a furniture material, as well as a structural uses, because almost 50% compressive capacity of material even though its residual area rates was 25%. Both rectangular shape and the cylinder shape represented that 'Brooming or end rolling' were the major failure mode, and partly splitting failure mode. The compressive capacity of the rectangular shape which residual area rates was large was higher than the cylinder shape, but it did not show statistical significance about the compressive capacity between them. Thus, it will be possible to use them mixed for a convenience of users. The result of the numerical analysis model was quite similar to actual test of the compressive capacity. Therefore, the yellow poplar can be utilized in the development of various uses by applying numerical analysis model about a variety of shapes and dimensions.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.413-428
• /
• 2010

The Gukjeon Pb-Zn mine was recognized as skarn deposits which replaced the limestone layer of the Jeongkansan Formation by intrusion of biotite granite in late Cretaceous. The Jeongkansan Formation is mainly composed of tuffaceous shale, and interlayers of sandstone, andesitic tuff, limestone, and conglomerate. The limestone layer is located in the lower part of the Jeongkansan Formation with 6~8 m in thickness and about 500 m in length. The Gukjeon deposits are divided into the Jukgang ore bodies once mined underground and the eastern ore bodies. Main ores are sphalerite and galena, in association with small amounts of chalcopyrite, arsenopyrite, pyrite, and pyrrhotite, etc. Skarns mainly consist of clinopyroxenes and Ca-garnets, associated with actinolite, chlorite, axinite, and calcite, etc. The Jukgang ore bodies show symmetrical distribution of zoning outward, representing clinopyroxene (hedenbergite) zone, clinopyroxene-garnet (grossular) zone, garnet (andradite) zone, and alteration zone of hornfels. $Fe^{2+}$ contents in clinopyroxenes increase with decreasing sphalerite grade. Sphalerite ores are found in all zones and $Fe^{2+}$ contents in sphalerite increase in the same way as those in clinopyroxenes, implying that clinopyroxene and sphalerite are closely related each other. It is concluded that the Gukjeon ores occurred in the ore rich zone of high grade sphalerite with less pyrite in assoication with clinopyroxene.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.295-307
• /
• 2022

We studied the Cretaceous Jeonggaksan Formation to determine depositional processes of pyroclastic density currents entering into the lacustrine environments. This formation is composed largely of sandstone-mudstone couplets and (tuffaceous) normally graded sandstones deposited in lacustrine environments, interbedded with two pyroclastic beds: welded massive lapilli tuff and normally graded lapilli tuff. The welded massive lapilli tuff (10 m thick) is composed of poorly sorted, structureless lapilli supported by a welded ash matrix. The normally graded lapilli tuff (4 m thick) is characterized by moderately to well sorted natures and multiple normally graded divisions in the lower part of the bed with internal boundaries. The contrasting depositional features between these lapilli tuff are suggestive of different physical characteristics and depositional processes of pyroclastic density currents in the lake. Overall poorly sorted and massive natures of the thick, welded massive lapilli tuff are interpreted to have been formed by rapid settling of pyroclastic sediments from highly concentrated and sustained pyroclastic density currents. In this case, the pyroclastic density currents were able to displace lake water from shoreline and the pyrolclastic density currents preserved their own heat except for frontal parts of the currents. As a result, welded textures can be formed despite entrance of pyroclastic density currents into the lake. The internal boundaries of the normally graded lapilli tuff reflect unsteady natures of the pyroclastic density currents at the time of the deposition and the pyroclastic density currents can not provide sufficient pressure to displace lake water. As a consequence, the pyroclastic density currents transformed into water-saturated turbidity currents, forming relatively well sorted, normally graded lapilli tuff.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.108-114
• /
• 2002

Red pine(Pinus densiflora) square timbers with 14.0 cm and 16.5 cm of face size and 24 m long were dried in a vacuum-press kiln and in a radio-frequency/vacuum(RF/V) kiln to compare drying rate, moisture content(MC) distribution and specific energy. RF/V drying rate was higher than vacuum-press drying rate. The effect of size of cross section on the RF/V drying rates were more pronounced than those of vacuum-press drying. The longitudinal- and the transverse MC distribution of dried square timber showed convex profile for the vacuum-press drying and concave profile for the RF/V drying. Moisture gradient of width direction was similar to the thickness direction in vacuum-press dried square timber and was more slight than that of the thickness direction in the RF/V dried large square timber. The specific energy consumption curve increased as MC decreased. Specific energy(kWh/kg of water evaporated) of the vacuum-press process required more than that of the RF/V process.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.134-139
• /
• 1997

가상 현실 세계에서 정보교류의 수단으로 자신의 정보를 제공하거나 또다른 정보를 수집하는 등의 정보교류와 자신을 표현하고자 하는데에 기존의 2차원의 캐릭터보다는 3차원의 캐릭터를 이용하여 사용자의 대리인으로 분신(Avatar)을 사용하는 3차원 영상을 주제로 하는 많을 연구들이 진행되고 있다. 본 연구에서는 가상현실 세계에서의 분신이 좀 더 현실감이 있는 자연스러운 행동과 상호작용을 보이기 위해서 사람 모습을 닮은 분신을 연구하였으며, 실세계의 자연스러운 정보들(손 동작, 몸 동작)을 분신에 적용하여 가상세계에서 분신의 행동양식과 상호작용이 가능하고 시각, 청각, 역각등의 다중형태의 정보들을 3차원으로 제공하고자 하는데 중점을 두었다. 이 시스템은 가상세계에서 분신을 생성하며 몇가지의 기본 행동을 가지고 간단한 방법과 실시간으로 분신의 움직임을 처리 할 수 있는 분신의 행동양식과 상호작용이 가능한 하가지 시스템을 소개할 것이다. 또한 이 시스템은 다른 기종의 플랫폼(PC, W/S)간에 다중참여자를 위하여 네트윅 환경하에서 실행 될 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.121-135
• /
• 2020

This study aims to evaluate applicability for the continuous drying process using saturated and superheated steam for large-square timber. During drying of the boxed heart square timber, changes in moisture content were examined through the slices of the surface, inner and core layers. The results showed that there was a large moisture content difference between the surface and inner layers during saturated steam drying and between the inner and core layers during superheated steam drying. However, despite the moisture content difference between the layers, no surface check occurred, and an internal check occurred only near the pith or juvenile parts of the wood. The maximum value of the drying stress of the dried larch boxed heart square timber, calculated from the elastic strain of the slice and the tangential elastic modulus of the larch, was 1.30 MPa. The tangential tensile strength of the larch was estimated at 5.21 MPa under temperature and moisture content conditions when drying stress was at a maximum. That is, in the continuous drying process, the saturated and superheated steam did not generate a check in the surface because the drying stress of the wood did not exceed the tangential tensile strength. In further studies, the superheated steam drying conditions will need to be relaxed to suppress the occurrence of internal checks. Such studies would make the continuous drying process using saturated and superheated steam available for the drying of large-square timber.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.221-233
• /
• 2013

This study was performed to identify the effect of end-coating around pith of heavy timbers of Red pine and Korean pine on high temperature and low humidity drying characteristics. Total drying times were 268 hours, and ranges of final moisture content was investigated that Red Pine 9.2% to 10.8% MC for square and round timber, in case of Korean Pine 15.0% to 22.0% MC for square timber, 12.8% to 20.4% MC for round timber. Moisture content distribution of Red Pine was a uniform, but part of high moisture content was found in Korean Pine. In case of Korean pine, the surface checks were occurred more severe than in case of Red pine, and end-coating treatment were investigated to be ineffective on surface check. The internal checks were only formed on the two timbers. The value of the case hardenings was investigated that the ranges 3.7% to 9.1% for Red pine. In case of Korean pine, on the other hand, the case hardenings presence a few as 20.9% to 35.8%.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.53-59
• /
• 2011

A connection was made between a single stretcher and 2 headers with 2 threaded nails (Type-A), and another one between 2 stretchers and 2 headers with 4 threaded nails (Type-B) to use as specimens. Type-C was the stretchers that are connected with 2 threaded nails by half lap joint at end-distance 5D to reinforce Type-B, Type-C1 the stretchers that are connected by half lap joint at end-distance 10D, and Type-C2 with 3 threaded nails at end-distance 10D. Compressive shear strength of Type-C, the supplementation of Type-B, was decreased by 30%, compared with that of Type-B. Those of Type-B and Type-C1 that used longer end-distance than Type-C were about the same, and that of Type-C2 connected with 3 threaded nails was 1.28-times stronger than that of Type-C1. Connection of the retaining wall using existing square timber has a problem between long and short stretchers and 2 headers. So it was investigated in the experiment to replace it. Therefore, if Type-B is replaced with Type-C2 in constructing the retaining wall, the crack and the rupture of timber caused by threaded nail as well as construction period can be reduced, and also it can be expected to increase their own strength.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.279-292
• /
• 2015

New occurrences of large-scaled Zn-Pb deposits are recently found in the Danjang-myeon, Milyang. They are skarn-type deposits which replaced the intercalated limestone beds in the Jeonggaksan Formation. This study aims at characterizing occurrences, mineralogy, and chemistry of Zn-Pb ores and skarn minerals. Skarn orebodies are mainly found in 3 areas, named Gukjeon-ri, Gorye-ri, and Gucheon-ri orebodies, where sphalerite found as main ore mineral in 200-300 m in height and amount of galena increases as altitude does. Ores are dark grey to dark green in color and closely related with clinopyroxene zone. They occur with hedenbergite, grossular, actinolite, epidote, and small amounts of axinite, calcite, and quartz. Main ore mineral is sphalerite which includes tiny spotted grains of galena and chalcopyrite and becomes rich in grade in association with clinopyroxene and epidote. FeS contents in sphalerite show relatively wide range between 1.53 and 23.07 mole%, whose contents intend to increase towards biotite granite known as ore-related igneous rocks. CdS contents are in the range of 0.22-0.93 mole%, showing decrease tendency from southwest (Gukjeon-ri) to northeast (Gucheon-ri). Zn-Pb deposits developed in Danjang-myeon reveal decrease in temperature with increase of altitude, leading to gradual changes in compositions of ore and skarn minerals.