• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.197-206
• /
• 2006

This study evaluated the effect of ultrasonic irradiation on improving the flux and cleaning efficiency in membrane process which is widely applied for the treatment of landfill leachate. The experiments on improvement of membrane flux according to the types of membranes(hallowfiber microfiltration, MF and tubular ultrafiltration, UF) were performed with changing frequency($40{\sim}120$ kHz), intensity ($200{\sim}500$ W) and irradiation time of ultrasound as well us operation pressure($0.1{\sim}2.3kg/cm^2$). Membrane was fouled for the first 50 min with primary treated leachate and then the change in flux according to ultrasonic irradiation period was observed for 70 min. Parameters influenced to the recovery ratio corresponding the net flux on pure water and to the enhancement ratio applied after ultrasonic irradiation on the flux were analyzed. In same condition, the flux was improved in proportion to ultrasonic intensity while the improvement of flux was inversely proportional to ultrasonic frequency. The cleaning effect of membrane was delayed and reduced when operation pressure of membrane was high. The recovery ratio and enhancement ratio for $0.1{\mu}m$ MF membrane were 10% and 500%, respectively while those were maximized at $75{\sim}98%\;and\;40{\sim}50%$ for UF membrane for 10,000 and 100,000 MWCO, respectively. In conclusion, it was confirmed that ultrasonic cleaning using mechanical vibration is alternative to water or chemical cleaning for improving membrane flux.

• Journal of the Korean Vacuum Society
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2002

It is observed the characteristic of the microwave air plasma in the wide range of the operating pressure, 1 mTorr ~ 760 Torr. The microwave air plasma was generated by an AC-type microwave source manufactured with a magnetron taken from a commertial microwave oven and the input power was fixed at 370 W. Characteristics of the plasmas were observed by an injection Langmuir probe and an OES(Optical Emission Spectroscopy). The breakdown electric field is drastically changed at 500 mTorr. For < 500 mTorr, the ratio of the breakdown electric field and the pressure decreased inversely to the pressure, $5.7\times10^4$V/m-Torr.However, the ratio increased linearly as 43 V/m-Torr for the operating pressure, > 500 mTorr. The minimum breakdown electric field was observed about 12. kV/m at 500 mTorr. It corresponds that the input frequency equals to the collision frequency. The effective collision cross section of the air at this pressure was calculated as $9.23\times10^{-l6}\textrm{cm}^2$.The results of the OES measurement revealed that the main ions were composed of the oxygen, argon, and nitrogen for > 500 mTorr. In contrast, only oxygen and argon ions were dominated for < 500 mTorr. ion temperature of oxygen (O(II)) in the air was decreased from about 1.2 eV to 0.5 eV as the pressure increased. Langmuir probe data shows that the plasma density for < 500 mTorr was higher that for > 500 mTorr.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.313-318
• /
• 2008

The influence of the particle size of platinum(Pt) on the stability and activity was studied. The particle size of platinum was controlled in the range of $3.5{\sim}9\;nm$ by heat treatment of commercial Pt/C and confirmed by XRD and TEM. An accelerated degradation test was performed to evaluate the stability of platinum catalysts. Oxygen reduction reaction was monitored for the measurement of activity. As increasing the Pt particle size, the stability of Pt/C electrode was enhanced and the activity was reduced. It was confirmed that the stability of Pt/C electrode was in inverse proportion to the activity. PtCo/C alloy catalyst was used to improve the activity and stability of large-sized platinum particle. The maximum power density of commercial Pt/C was $507.6\;mV/cm^2$ and PtCo/C alloy catalyst was $585.8\;mV/cm^2$. The decrement of electrochemical surface area showed Pt/C(60%) and PtCo/C alloy catalyst(24%). It was possible to enhance both of stability and activity of catalyst by the combination of particle size control and alloying.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.2
• /
• pp.72-79
• /
• 2003

This study was performed to investigate the effects of CMS (Condensed Molasses Soluble, a by-product generated from molasses during the lysine production) on the nutrient uptake, growth and yield of rice. The nitrogen uptake of rice was found to be higher in CMS treatments compared to the control treatment during the growth period. The leaf color index, height of the plants and number of tillers were increased by the application of CMS. Rice yield was highest in ($7,070kg\;ha^{-1}$) and an increase of 21% was observed in 0.3% CMS treated plots compared untreated control ($3,000kg\;ha^{-1}$). The protein content of unpolished rice increased from 4 to 28% due to the effect of CMS, while Toyo palatability score decreased. Though a decrease in pH and an increase in EC values were observed with CMS application, this phenomenon did not affect the growth and yield of rice in paddy field.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.277-284
• /
• 2018

This paper reports the transparent electrode, which would be applied to transparent displays and smart glasses. Herein, a squared metal mesh with the most widely used copper wire in microwaves is studied for the alternating thin-film-type transparent and conducting indium tin oxide(ITO), with a low conductivity(sheet resistance > $5{\Omega}/sq.$). The electromagnetic performance of a patch antenna with metal mesh is analyzed. This paper presents the results of the optical(OT, optical transparent) and electrical(sheet resistance) characteristics of a squared metal mesh, which is a basic design. To improve the OT, copper wire(w=0.2 mm) is used in fabricating the squared metal mesh and the relationship between the OT and the antenna performance(radiation gain, radiation pattern) was analyzed according to the mesh size(l=1, 2 mm). The measurement results show that the antenna performance and the optical characteristic are in inverse proportion to each other. In real applications, the optical and electrical characteristics, and the costs of production are to be considered.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.207-215
• /
• 1998

There have been many radiation measurement methods so far among which film dosimetry, TLD, and ion chamber are the most frequently used methods. But this study describes a new radiation measurement method which uses polymer gel and magnetic resonance imaging(MRI). The objective of this study is to fabricate a polymer gel sensitive to radiation and to generate a dose to MRI contrast relationship, and to apply this results to the radiation measurement for the brachytherapy. To do this, 12 cm diameter cylindrical gel phantom was made, and the phantom was irradiated using the 30 mm diameter circular collimator which was used for radiosurgery. And this irradiated phantom was scanned with MRI. To find out the relationship between the radiation dose and the transversal relaxation time, an image processing software(IDL) was used. From this study it is found out that the radiation dose showed linear relationship to the transversal relaxation time of the gel up to 17 Gy($R^2$=0.993) and they had a different relationship above 17 Gy. The dose distributions were calculated using these results for the Ir-192 sources, one for the HDR afterloading system and the other for a 2 mCi seed source. And these calculated dose distributions were compared to the ones from the treatment planning computers. From this study the dose to the irradiated gel's transversal relaxation time relationship was examined, and this result was tried for the measurement of the brachytherapy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.794-799
• /
• 2007

Nitrate contents and quality characteristics of Ulgari-Baechu Kimchi, Yulmoo Kimchi, and Yulmoo Mul-Kimchi were investigated during a storage period. In case of Ulgari-Baechu Kimchi and Yulmoo Kimchi, an increase of pH and decrease of acidity were distinguished by the 4th day of the storage after fermentation. In Yulmoo Mul-Kimchi, pH value decreased and total acidity increased through the whole storage period. Total microbial and lactic acid bacterial counts of Yulmoo Kimchi and Ulgari-Baechu Kimchi reached the peak at the 4th day of storage and slowly decreased after the 18th day. Total microbial and lactic acid bacterial counts of Yulmoo Mul-Kimchi were also the highest at the 4th day of fermentation but showed gradual decreases from the same day. Nitrate contents of Ulgari-Baechu Kimchi significantly decreased by fermentation at room temperature, which continued during the whole store period to down by 11%. Showing the similar pattern in the nitrate content change, Yulmoo Kimchi and Yulmoo Mul-Kimchi recorded 12% and 5% decrease, respectively.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.333-338
• /
• 2020

Dye markers are used in the study of subterranean termites to determine colony territories and population sizes. Dyes not only allow the study of termite biology, but can also be used for control purposes. Although Reticulitermes speratus kyushuensis causes damage to wooden historical properties in Korea, the dye markers have not been applied. Therefore, we evaluated the applicability of Nile Blue A dye for R. s. kyushuensis. Filter papers dyed with concentrations of 0.05%, 0.10%, and 0.25% (w/w) were each fed to termite populations through a no-choice feeding test for 1, 3, or 7 days. After 4 weeks, the survival rate, dyeing rate, and maintenance of dyeing were recorded. The results showed high survival rates with lower dye concentrations and shorter feeding periods. Among the combinations of concentrations and days, high survival rates, dyeing rates, and dyeing maintenance periods were found at concentrations of 0.05% and 0.10% for 3 days of feeding. These maximized the survivorship and visibility. The results from the current study can be applied to investigate the ecology and control of R. s. kyushuensis in both the laboratory and field.

• Korean Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.11-18
• /
• 2010

The contamination of a suite of heavy metals were evaluated in water and sediments of urban stream, Tancheon down the stream. Tancheon is a urban stream which goes all the way across the urban area where various pollution sources are present. The sixteen study sites from seven different areas were designated down the stream. The heavy metal levels of the streams were detected in the order of Zn>Cu>Ni>Pb>Cd>Cr>Sb. There was a difference in the relative order of the concentration ranking in lake sediments. There is a trend that the heavy metal levels are higher at the sites where the construction causes inflow of soil particles to stream. Toxicity tests using pore-water in sediments were conducted for samples collected in some study sites, and pore-water in one site was proven to be toxic to Japanes medaka (Oryzias latipes). The reason may be the fecal pollution rather than heavy metal effect. Strong odor was detected in the sediment whose pore-water samples showed ecotoxicity. We did not observed the increasing concentration of heavy metals down to stream since the soil texture varied in the stream area of our study. Further study is needed to find quantitative relations between the level of contamination and its eco-effect.

• Journal of Korea Water Resources Association
• /
• v.46 no.2
• /
• pp.155-169
• /
• 2013

This study proposes proper forms of empirical formulas for the concentration time and storage coefficient based on their theoretical backgrounds and evaluates several existing empirical formulas by comparing them with the formula proposed in this study. Additionally, empirical formulas for the concentration time and storage coefficient of the Chungju Dam basin were derived using the forms proposed by considering their theoretical backgrounds, and compared with exiting empirical formulas. The results derived are summarized as follows. (1) The concentration time of a basin is proportional to the square of the main channel length, but inversely proportional to the channel slope, as the flood flow is generally turbulent. (2) The storage coefficient is proportional to the concentration time. (3) The comparison results with existing empirical formulas for the concentration time indicates that the empirical formulas like the Kirpich, Kraven (I), Kraven (II), California DoT, Kerby, SCS, and Morgali & Linsley are in line with the form proposed in this study. Among existing empirical formulas for the storage coefficient, the Clak, Russell, Sabol and Jung are found to be well matched to this study. (4) The application results to Chungju Dam basin indicates that among empirical formulas for the concentration time, the Jung, Yoon, Kraven (I), and Kraven (II) show relatively similar results to the observed in this study, but the Rziha shows abnormal results. Among the empirical formulas for the storage coefficient, the Yoon and Hong, Jung, Lee, and Yoon show somewhat reasonable results, but the Sabol shows abnormal results. In conclusion, the empirical formulas for the concentration time and storage coefficient developed in Korea are found to reflect the basin characteristics of Korea better.