• Title/Summary/Keyword: 접합비

Search Result 1,316, Processing Time 0.036 seconds

Simple Model for Preliminary Design of Hexagrid Tall Building Structure (헥사그리드 고층건물구조의 예비설계를 위한 단순모델)

  • Lee, Han-Ul;Kim, Young-Chan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.6
    • /
    • pp.13-20
    • /
    • 2017
  • High-rise building shapes are changing from orthogonal to irregular form and the current trend is to arrange members in geometric grid-patterns at the perimeter of buildings. This study proposes a simple model for the preliminary design of a hexagrid high-rise building. The size of the cross section is set to be different at each module and hexagrid unit, which is different from the previous studies in which all hexagrid members were the same. To examine the effect of hexagrid size on structural performance, 60-story hexagrid buildings with 1-, 2- and 4-story high modules are designed and analyzed. Maximum lateral displacement, steel tonnage, load carrying percentage of perimeter frame and combined strength ratio are compared for 15 buildings. As the lateral load carrying capacity of hexagrid structure was inferior to a diagrid structural system, proper lateral stiffness should be allocated to the core frame in a hexagrid structure. The best ratio of flexural to shear deformation was 4 and larger unit size was better in considering constructional cost and structural efficiency. As the maximum lateral displacements of the buildings were within 84%~108% of the limit, the proposed method seems to be applicable to preliminary design of hexagrid buildings.

Initial Imperfection and Axial Strength of Struts with Octagonal Hollow Section fabricated from HR Plate (열연강판 팔각강관 버팀보의 초기편심과 축방향 압축강도)

  • Jo, Jae Byung
    • Journal of Korean Society of Steel Construction
    • /
    • v.27 no.1
    • /
    • pp.23-30
    • /
    • 2015
  • Developed in this study were Octagonal-hollow-section(OHS) struts, whose compressive strengths against flexural and local buckling is higher than H-shape or rectangular-hollow-section(RHS) struts with the same unit weight. OHS members are also advantageous in handling and storing compared to circular hollow sections(CHS). OHS members were fabricated from HR Plates by cold forming and fillet welding. 5 numbers of 20m long OHS struts were assembled, each of which consist of two 9.6m long OHS member and two end connection elements made of cast iron. The compressive strength of the OHS strut was evaluated by comparing the test results, design codes and FEM analysis each other. Test results show that all of the struts have almost same or larger compressive strength than Korean Road Bridge Design Code(KRBDC) (2012). The initial imperfections can be estimated by using measured strains and are turned out to be less than L/450 for all the struts tested. The results of FEM analysis show that the variation of initial imperfection has less effects on the compressive strength for struts with vertical surcharge than for those with self-weight only, while the strength decreases as the initial imperfection increases. As the result of this study, the allowable initial imperfection for 20m long OHS struts is recommended to be less than L/350 on job sites.

Measurement and Analysis of Bed Shear Stresses in Compound Open Channels using the Preston Tube (프레스톤튜브를 이용한 복단면 하도의 하상전단응력 측정 및 분석)

  • Lee, Du Han;Kim, Myounghwan;Kim, Won;Seo, Il Won
    • Ecology and Resilient Infrastructure
    • /
    • v.4 no.4
    • /
    • pp.207-215
    • /
    • 2017
  • Hydraulic issues such as flow resistance, side wall correction, sediment, erosion and deposition, and channel design have close relation with distribution of bed shear stresses but the measurement of the distribution of bed shear stresses is not easy. In this study the Preston tube which makes possible relatively simple measurement of bed shear stresses is used to analyze the characteristics of bed shear distribution in compound open channels with different depth ratio. The Preston tubes are made and calibrated to develop the calibration formula and then they are applied to measure bed shear stress distribution in 5 cases depth ratio condition of compound channels. The results are compared with former experiment data, and characteristics of bed shear stress distributions are studied with different channel scales and Reynolds numbers. Although bed shear distributions with depth ratio show overall agreement with former studies, some differences are verified in bed shear variation, formation of inflection point in main channel, and distribution near floodplain junction which are due to high Reynolds number. Through the study applicability of the Preston tubes are also verified and characteristics of bed shear distribution in compound channels are suggested with Reynolds number and depth ratio.

Speaker-Independent Korean Digit Recognition Using HCNN with Weighted Distance Measure (가중 거리 개념이 도입된 HCNN을 이용한 화자 독립 숫자음 인식에 관한 연구)

  • 김도석;이수영
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.18 no.10
    • /
    • pp.1422-1432
    • /
    • 1993
  • Nonlinear mapping function of the HCNN( Hidden Control Neural Network ) can change over time to model the temporal variability of a speech signal by combining the nonlinear prediction of conventional neural networks with the segmentation capability of HMM. We have two things in this paper. first, we showed that the performance of the HCNN is better than that of HMM. Second, the HCNN with its prediction error measure given by weighted distance is proposed to use suitable distance measure for the HCNN, and then we showed that the superiority of the proposed system for speaker-independent speech recognition tasks. Weighted distance considers the differences between the variances of each component of the feature vector extraced from the speech data. Speaker-independent Korean digit recognition experiment showed that the recognition rate of 95%was obtained for the HCNN with Euclidean distance. This result is 1.28% higher than HMM, and shows that the HCNN which models the dynamical system is superior to HMM which is based on the statistical restrictions. And we obtained 97.35% for the HCNN with weighted distance, which is 2.35% better than the HCNN with Euclidean distance. The reason why the HCNN with weighted distance shows better performance is as follows : it reduces the variations of the recognition error rate over different speakers by increasing the recognition rate for the speakers who have many misclassified utterances. So we can conclude that the HCNN with weighted distance is more suit-able for speaker-independent speech recognition tasks.

  • PDF

Pd/Si-based Emitter Ohmic Contacts for AlGaAs/GaAs HBTs (AlGaAs/GaAs HBT 에미터 전극용 Pd/Si계 오믹 접촉)

  • 김일호
    • Journal of the Korean Vacuum Society
    • /
    • v.12 no.4
    • /
    • pp.218-227
    • /
    • 2003
  • Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au ohmic contacts to n-type InCaAs were investigated for applications to AlGaAs/GaAs HBT emitter ohmic contacts. In the Pd/Si/Ti/Pt ohmic contact, as-deposited contact showed non-ohmic behavior, and high specific contact resistivity of $5\times10^{-3}\Omega\textrm{cm}^2$ was achieved by rapid thermal annealing at $375^{\circ}C$/10 sec. However, the specific contact resistivity decreased remarkably to $2\times10^{-6}\Omega\textrm{cm}^2$ by annealing at $425^{\circ}C$/10sec. In the Pd/Si/Pd/Ti/Au ohmic contact, minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved by annealing at $400^{\circ}C$/20sec. In both ohmic contacts, low contact resistivity and non-spiking planar interface between ohmic materials and InGaAs were maintained. Therefore, these thermally stable ohmic contact systems are promising candidates for compound semiconductor devices. RF performance of the AlGaAs/GaAs HBT was also examined by employing the Pd/Si/Ti/Pt and Pd/Si/Pd/Ti/Au systems as emitter ohmic contacts. Cutoff frequencies were 63.9 ㎓ and 74.4 ㎓, respectively, and maximum oscillation frequencies were 50.1 ㎓ and 52.5 ㎓, respectively. It shows very successful high frequency operations.

Effects of Post-annealing and Temperature/Humidity Conditions on the Interfacial Adhesion Energies of ALD RuAlO Diffusion Barrier Layer for Cu Interconnects (후속열처리 및 고온고습 조건에 따른 Cu 배선 확산 방지층 적용을 위한 ALD RuAlO 박막의 계면접착에너지에 관한 연구)

  • Lee, Hyeonchul;Jeong, Minsu;Bae, Byung-Hyun;Cheon, Taehun;Kim, Soo-Hyun;Park, Young-Bae
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.23 no.2
    • /
    • pp.49-55
    • /
    • 2016
  • The effects of post-annealing and temperature/humidity conditions on the interfacial adhesion energies of atomic layer deposited RuAlO diffusion barrier layer for Cu interconnects were systematically investigated. The initial interfacial adhesion energy measured by four-point bending test was $7.60J/m^2$. The interfacial adhesion energy decreased to $5.65J/m^2$ after 500 hrs at $85^{\circ}C$/85% T/H condition, while it increased to $24.05J/m^2$ after annealing at $200^{\circ}C$ for 500 hrs. The X-ray photoemission spectroscopy (XPS) analysis showed that delaminated interface was RuAlO/$SiO_2$ for as-bonded and T/H conditions, while it was Cu/RuAlO for post-annealing condition. XPS O1s peak separation results revealed that the effective generation of strong Al-O-Si bonds between $AlO_x$ and $SiO_2$ interface at optimum post-annealing conditions is responsible for enhanced interfacial adhesion energies between RuAlO/$SiO_2$ interface, which would lead to good electrical and mechanical reliabilities of atomic layer deposited RuAlO diffusion barrier for advanced Cu interconnects.

생쥐 초기 배아에서 Aquaporin 8과 9의 발현에 관한 연구

  • 신현상;계명찬;강수만;이성은;이지원;강한승;김문규
    • Proceedings of the Korean Society of Developmental Biology Conference
    • /
    • 2003.10a
    • /
    • pp.68-68
    • /
    • 2003
  • Aquaporin은 막관통 통로 단백질(transmembrane channel protein)로서, 삼투압의 농도구배에 따라 세포막을 가로질러 물분자를 이동시키는 기능을 하고 있다. 포유류 초기배아에서 포배강 형성은 영양외배엽세포에서 $Na^+ / K^+$ATPase에 의한 이온 농도 구배가 형성되면 auqaporin에 의해 물이 포배강으로 유입되면서 이루어진다. 본 연구에서는 생쥐 초기배아에서 반정량적인 역전사 중합효소 연쇄반응 방법(semi-quantitative RT-PCR)과 실시간 역전사 중합효소 연쇄반응 방법(real-time RT-PCR)을 통하여 AQP8과 9의 mRNA발현을 조사하고 다중 면역형광현미경 방법(confocal immunofluorescence microscopy)을 통해 단백질 발현양상을 분석하였다. AQP8 mRNA는 상실기까지 발현되지 않다가 포배기에 이르러 발현되었고 AQP9 mRNA는 수정란에서부터 발현되어 포배기에는 유의할 정도로 증가하였다. 따라서 AQP8 mRNA는 배아유전자가 활성화되어 나타나는 것이고 AQP9 mRNA는 모계유전자 기원임을 알 수 있었다. AQP8 단백질은 상실배 단계까지 발현되지 않다가 포배시기에 영양외배엽세포사이의 접합면에 발현되었고 AQP9 단백질은 상실배 시기에 할구 사이의 인접 부위에서 강하게 발현되었다가 포배시기에는 세포간의 접합면에 약하게 발현하는 경향을 나타내었다. 실시간 역전사 중합효소 연쇄반응 방법으로 조사한 결과 포배에서 물과 글리세롤을 통과시키는 AQP9는 mRNA의 발현양이 AQP8보다 약 4배 정도 많았다. 또한 포배기에 이르러서야 물만을 통과시키는 AQP8의 발현이 나타나는 것을 보아 포배강 형성시 외부에서 영양외배엽을 통해 포배강으로 유입되는 물의 이동(trans- trophectodermal water movements)에 AQP9보다 AQP8이 더 중요하게 관여할 것으로 사료된다., K, Pb, Cd, Cr, Co, Cu, Ni)을 측정하였다. 실험 조건1의 결과로서 각 국의 유아용 일회용 기저귀의 중금속 함량은 거의 유사한 경향을 나타내었으며 Cr, Zn, Pb, Ni, Mn, Mg, Li, K는 detection limit(2 ppm) 이하였고, Cd, Fe, Co, Cu, Ca, Al, Sr는 검출되었지만 기준치 이하였다. 실험 조건2의 결과로서 측정 항목(Cr, Sb, Cd, Pb, Ni, Co, Cu)중 Cr, Cd, Ni, Cu는 detection limit(0.1 ppm) 이하였고, Sb, Pb, Co는 검출되었지만 기준치 이하였다.았다. 4%의 경우에는 8$0^{\circ}C$이하로 온도를 낮추는 것이 좋은 상태를 나타내었다. 이와 같은 결과는 일반적으로 화학적 레팅을 4%, 7%에서한 선행결과와 상당히 다른 결과이다.염 농도가 증가할수록 감소 현상을 보였다.X>, 75BG30은 8.6$\mu\textrm{m}$, 75BG40은 7.02$\mu\textrm{m}$로 나타났다. 따라서 경화제 양에 관계없이 10$\mu\textrm{m}$ 이하로 나타나, 경화제 10$m\ell$만으로 미세한 크기를 얻을 수 있음을 알 수 있다. 젤리 강도 변화에 따른 차이는 300BF는 78.09$\mu\textrm{m}$ 300BG는 56.32$\mu\textrm{m}$로, 75BF나 75BG에 비하여 현저히 증가하여, 젤라틴의 젤리 강도는 캡슐 제조 조건의 주요한 변수임을 알 수 있다.추출물 투여시 혈당강하 및 혈중콜레스테롤 강하가 나타났으며, 상엽복합추출물 투여와 운동을 병행시 이러한 감소 효과가 더 뚜렷하게 나타났다.교육의 적임자로 보는 시각이 비교적 높았고 약 1/2정도는 영양교육에 참여하겠다는 의지를 가지고 있을 뿐만 아니라 실제로 영양지도를

  • PDF

Selection and Characterization of Horticultural Traits of Tomato leaf curl virus (TYLCV)-resistant Tomato Cultivars (토마토 황화잎말림바이러스(TYLCV) 저항성 품종 선발 및 원예특성 분석)

  • Kim, Woo-Il;Kim, Kwang-Hwan;Kim, Young-Bong;Lee, Heung-Su;Shon, Gil-Man;Park, Young-Hoon
    • Horticultural Science & Technology
    • /
    • v.31 no.3
    • /
    • pp.328-336
    • /
    • 2013
  • This study was conducted to evaluate imported tomato $F_1$ cultivars as breeding materials for the resistance to Tomato yellow leaf curl virus (TYLCV) by molecular markers and bioassay. From marker genotyping and disease evaluation of 40 $F_1$ cultivars, most of the cultivars declared as TYLCV-resistance carried heterozygous marker genotype for the TYLCV resistance genes Ty-1, Ty-3, or Ty-3a, and showed low disease rates. Whereas, 4 of 5 $F_1$ cultivars declared as intermediate resistance showed marker genotype for susceptibility and disease rates ranged 18.1-33.3%. However, the xx cultivars showed inconsistency in marker genotype and disease rate. Characterization of horticultural traits of the $F_1$ cultivars with TYLCV-resistance indicated that large-size fruit cultivars were higher in yield and similar in sugar contents and solid-acid ratio compared to a control cultivar preferred in the domestic market, although hardness remained to be a problem. On the other hand, cherry tomato cultivars showed lower yield and brix, but longer internode compared to a control cultivar, indicating that breeding for TYLCV-resistance using these cultivars will require more efforts and time compared to large-sized.

Tensile Testing of Groove Welded Joints Joining Thick-HSA800 Plates (HSA800 후판재의 맞댐용접부 인장강도 실험)

  • Lee, Cheol Ho;Kim, Dae Kyung;Han, Kyu Hong;Park, Chang Hee;Kim, Jin Ho;Lee, Seung Eun;Kim, Do Hwan
    • Journal of Korean Society of Steel Construction
    • /
    • v.25 no.4
    • /
    • pp.431-440
    • /
    • 2013
  • In this study, a standard tensile welded-joint test was conducted to select a welding electrode suitable for recently developed HSA800 steel. Two welding electrodes were available at the time of this study; one was GMAW-based and the other FCAW-based. The tensile test specimens were fabricated by joining 60mm-thick HSA800 plates according to the AWS-prequalified groove welded joint details. Specimens which violate the standard root opening distance (ROD) were also included to see if poor construction tolerance could be accommodated. During fabrication, serious concerns about the welding efficiency of the GMAW-based product were raised by a certified welder. Both welding electrodes showed satisfactory and similar performance from welded joint strength perspective. But groove welded joints made by using the FCAW-based rod consistently showed more ductile and stable behavior. The AISC provisions for PJP joint strength were shown to be very conservative under direct tensile loading. Violating the AWS prequalified ROD by 100% apparently passed the strength criteria, but unusual crater-like fracture surface was observed.

Monolithic 3D-IC 구현을 위한 In-Sn을 이용한 Low Temperature Eutectic Bonding 기술

  • Sim, Jae-U;Park, Jin-Hong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.338-338
    • /
    • 2013
  • Monolithic three-dimensional integrated circuits (3D-ICs) 구현 시 bonding 과정에서 발생되는 aluminum (Al) 이나 copper (Cu) 등의 interconnect metal의 확산, 열적 스트레스, 결함의 발생, 도펀트 재분포와 같은 문제들을 피하기 위해서는 저온 공정이 필수적이다. 지금까지는 polymer 기반의 bonding이나 Cu/Cu와 같은 metal 기반의 bonding 등과 같은 저온 bonding 방법이 연구되어 왔다. 그러나 이와 같은 bonding 공정들은 공정 시 void와 같은 문제가 발생하거나 공정을 위한 특수한 장비가 필수적이다. 반면, 두 물질의 합금을 이용해 녹는점을 낮추는 eutectic bonding 공정은 저온에서 공정이 가능할 뿐만 아니라 void의 발생 없이 강한 bonding 강도를 얻을 수 있다. Aluminum-germanium (Al-Ge) 및 aluminum-indium (Al-In) 등의 조합이 eutectic bonding에 이용되어 각각 $424^{\circ}C$$454^{\circ}C$의 저온 공정을 성취하였으나 여전히 $400^{\circ}C$이상의 eutectic 온도로 인해 3D-ICs의 구현 시에는 적용이 불가능하다. 이러한 metal 조합들에 비해 indium (In)과 tin (Sn)은 각각 $156^{\circ}C$$232^{\circ}C$로 굉장히 낮은 녹는점을 가지고 있기 때문에 In-Sn 조합은 약 $120^{\circ}C$ 정도의 상당히 낮은eutectic 온도를 갖는다. 따라서 본 연구팀은 In-Sn 조합을 이용하여 $200^{\circ}C$ 이하에서monolithic 3D-IC 구현 시 사용될 eutectic bonding 공정을 개발하였다. 100 nm SiO2가 증착된 Si wafer 위에 50 nm Ti 및 410 nm In을 증착하고, 다른Si wafer 위에 50 nm Ti 및 500 nm Sn을 증착하였다. Ti는 adhesion 향상 및 diffusion barrier 역할을 위해 증착되었다. In과 Sn의 두께는 binary phase diagram을 통해 In-Sn의 eutectic 온도인 $120^{\circ}C$ 지점의 조성 비율인 48 at% Sn과 52 at% In에 해당되는 410 nm (In) 그리고 500 nm (Sn)로 결정되었다. Bonding은 Tbon-100 장비를 이용하여 $140^{\circ}C$, $170^{\circ}C$ 그리고 $200^{\circ}C$에서 2,000 N의 압력으로 진행되었으며 각각의 샘플들은 scanning electron microscope (SEM)을 통해 확인된 후, 접합 강도 테스트를 진행하였다. 추가로 bonding 층의 In 및 Sn 분포를 확인하기 위하여 Si wafer 위에 Ti/In/Sn/Ti를 차례로 증착시킨 뒤 bonding 조건과 같은 온도에서 열처리하고secondary ion mass spectrometry (SIMS) profile 분석을 시행하였다. 결론적으로 본 연구를 통하여 충분히 높은 접합 강도를 갖는 In-Sn eutectic bonding 공정을 $140^{\circ}C$의 낮은 공정온도에서 성공적으로 개발하였다.

  • PDF