• SUVANNABHUMI
• /
• v.5 no.1
• /
• pp.107-150
• /
• 2013

본 연구는 필리핀 국제결혼 이주여성들이 한국사회에 적응하는 과정에서 나타나는 초국가적 행태의 원인을 국가, 시장, 사회의 상호작용을 중심으로 고찰하였다. 자본주의적 시장경제체제 하에서 시장의 역할은 확대되고, 국가의 시장통제와 사회보호는 약화되며, 사회는 이러한 환경에 적응하기 위한 선택을 하게 된다. 지구화의 영향으로 교류와 접촉의 기회가 증가함에 따라 국제결혼의 가능성이 다양한 수준으로 확대된 것은 사실이다. 그러나 국제결혼이주를 선택하는 많은 수의 필리핀 여성들은 시장경제체제의 소외계층에 속하며, 이들을 맞이하는 한국 남성들도 많은 경우 국내 결혼시장에서 소외된 계층에 속한다. 이들의 초국가적 행태는 지구화 시대에 국경을 넘나들며 다양한 외국어 능력을 갖추고, 타국 문화에 익숙하며, 품위 있는 직장을 가진 '세계시민'의 그것과는 대조적이다. 오히려 시장경제체제 하에서 소외된 사람들의 생존전략의 하나로 볼 수 있다. 기존의 초국가주의 논의가 이주자 개인의 삶과 출신지의 변화에 초점을 두었다면, 본 연구의 국제결혼이주와 연관된 초국가적 행태는 생존전략으로서의 선택이라는 측면과 정착지 사회의 변화에 초점을 두었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.371-374
• /
• 2024

본 논문에서는 PBD(Position-based dynamics)를 이용한 옷감 시뮬레이션에서 페이스(Face) 및 에지(Edge)의 충돌/접촉을 처리할 때 나타나는 표면 떨림 문제를 SDF(Signed Distance Field) 접근법을 통해 안정적으로 해결할 수 있는 기법을 제안한다. 충돌 제약 조건을 이용한 충돌처리에서 나타나는 옷감 시뮬레이션의 떨림 현상을 개선하기 위해 본 논문에서는 페이스 및 에지 내부에 존재하는 충돌 지점의 속도를 충돌 법선 방향과 접선 방향으로 나누어 계산하는 과정을 거치며, 그 운동량을 페이스 및 에지에 포함된 연결된 정점(Vertex)에 전달한다. 본 논문에서 제안하는 기법은 일반적인 SDF 기반 충돌 처리에서 나타나는 충돌 시 떨림 현상을 개선하며, 기존의 방법보다 안정적인 SDF 충돌처리가 가능하기 때문에 다양한 변형체 재질을 시뮬레이션 할 때 활용될 수 있다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.52-62
• /
• 2015

This study conducted an experiment to clarify the effect of rubber bands used as a root connector during the process of transplanting landscape trees on the development of the root system and the rooting process. The research period was four years, from April 2007 to April 2011, and the test conducted for this study was performed at the experimental field located at 398-2 Bangdong-ri, Sacheon-myeon, Gangneung-si, Gangwon-do. Twenty 15-year-old Pinus densiflora Siebold & Zucc. with good growth conditions were harvested and transplanted from the forest in Jebi-ri, Gujeong-myeon, Gangneung-si, Gangwon-do for the field experiment. A completely randomized design was applied for plot design, with 10 pines without rubber bands and 10 pines with rubber bands. Pinus densiflora for. multicaulis Uyeki was selected as the official tree of the pot test and was planted in a transparent pot to observe the development of the root system. A completely randomized design was applied for plot design, with 3 pines without rubber bands and 3 pines with rubber bands. The results of this research on the effect of rubber bands used as a root connector on root system development and the rooting process are as follows. 1. The rate of height growth in the field test was 4.1% lower in the trees with rubber bands when compared to trees without rubber bands. Trees with rubber bands were 4.2% wider than those without rubber bands in root diameter. The chlorophyll content was 6.8% higher in trees without rubber bands, but the rate of height growth, root diameter, and chlorophyll content were not significantly correlated. 2. In the comparison of fresh root weight in the field test, trees with rubber banding had roots weighing 1,740.0kg and those without rubber bands had roots weighing 1,433.3kg. Root dry weight was 522.3g in trees with rubber bands and 450.0g in those without rubber bands, but showed no significant difference depending on whether the rubber band was attached. 3. In a comparison of root number between surfaces touching and not touching the rubber band in trees with rubber banding, the surface touching the rubber band was observed to have more roots growing, the difference of which was deemed significant. 4. The shoot growth rate in the pot test was 1.1% higher in trees without rubber bands when compared with trees with rubber bands. The chlorophyll content was 0.02 higher in trees with rubber bands but the difference was not significant. 5. In the pot test, no significance was found in comparison of root number, root length, and root dry weight in trees with and without rubber bands. These test results imply that removing rubber bands as a connector does not present any significant effects on the ground growth or root development of transplanted pine trees. As it is shown that surface touching rubber bands grow more roots in trees with rubber bands, more active related research must be undertaken.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.35-39
• /
• 2015

Polyvinylchloride (PVC) thin films having a microporous structure could be prepared by using the solubility difference in solvents. PVC thin film with a water contact angle of $150^{\circ}$ or more was obtained from the PVC solution consisting of the mixture of tetrahydrofuran as a solvent and propanol as a non-solvent. In the drying process of dip-coated PVC film, the increase of drying temperature reduced the tendency of roughened surface, which led the decrease of surface hydrophobicity. As the addition of propanol in the solution with 1 wt% PVC increased, the uniformity of surface roughness was improved. In the case of oxygen plasma treatments, even though the surface structure of PVC thin film was not notably changed, the surface property of the film was changed from the super-hydrophobicity to hydrophilicity as a function of the plasma exposing time.

• Explosives and Blasting
• /
• v.23 no.3
• /
• pp.27-42
• /
• 2005

An explosion modeling technique was developed by using the spherical discrete element code, $PFC^{3D}$, which can be used to model the dynamic stress wave propagation phenomenon. The modeling technique is simply based on an idea that the explosion pressure should be applied to a $PFC^{3D}$ particle assembly not in the form of an external force (body force), but in the form of a contact force (surface force). The stress wave propagation modeling was conducted by simulating the experimental approach based on the Hopkinson's effect combined with the spatting phenomenon that had previously been developed to determine the dynamic tensile strength of Inada granite. As a result, the stress wave velocity obtained by the proposed modeling technique was 4167 m/s, which is merely $3\%$ lower than the actual wave velocity of 4300 m/s for an Inada granite.

• Journal of Korea Multimedia Society
• /
• v.17 no.2
• /
• pp.124-131
• /
• 2014

In this paper, we propose the non-contact gesture recognition algorithm using 4- channel electrometer sensor array. ELF(Extremely Low Frequency) EMI and PLN are minimized because ambient electromagnetic noise around sensors has a significant impact on entire data in indoor environments. In this study, we transform AC-type data into DC-type data by applying a 10Hz LPF as well as a maximum buffer value extracting algorithm considering H/W sampling rate. In addition, we minimize the noise with the Kalman filter and extract 2-dimensional movement information by taking difference value between two cross-diagonal deployed sensors. We implemented the DTW gesture recognition algorithm using extracted data and the time delayed information of peak values. Our experiment results show that average correct classification rate is over 95% on five-gesture scenario.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.671-676
• /
• 2016

Recently, according to the limelight of Fintech, simple payment using biometric at smartphone is widely used. In this paper, we propose a new contactless biometric method using thumb image without additional sensors unlike previous biometrics such as fingerprint, iris, and vein recognition. In our method, length, width, and skin texture information are used as features. For that, illumination normalization, skin region segmentation, size normalization and alignment procedures are sequentially performed from the captured thumb image. Then, correlation coefficient is calculated for similarity measurement. To analyze recognition accuracy, genuine and imposter matchings are performed. At result, we confirmed the FAR of 1.68% at the FRR of 1.55%. In here, because the distribution of imposter matching is almost normal distribution, our method has the advantage of low FAR. That is, because 0% FAR can be achieved at the FRR of 15%, the proposed method is enough to 1:1 matching for payment verification.

• Korea journal of population studies
• /
• v.24 no.1
• /
• pp.91-121
• /
• 2001

This paper attempts to investigate the influence of IMF economic crisis on family lives through questionnaire survey of 1001 women in Seoul. According to the results of the survey, we found the following changes that the economic crisis brought to the family lives. With the unemplyment, communication between husbands and wives became more dense in both positive and negative ways. While the possibility of violence and separation beteen husbands and wives was relatively low, violence against the children more directly reflects the economic difficulties . In the economic crisis, relatives are more important resouces for supports than friends and social welfare institutions . Especially the families of the wives are the most important supporters. Through the changes of consumption pattern in economic crisis. we confirmed that the expences for cultural activities, the hospitals and private education have some flexibility. That is, those expences firstly decreased in the economic crisis. Confronting the economic difficulties economic motivation of women to find works became stronger and we saw same possibility of changes of women\`s role pattern by undergoing economic difficulties.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.416-424
• /
• 1997

Mass transfer mechanism and concentration profiles in the axial direction at each phase were analyzed and simulated by a theoretical modeling on a liquid-liquid static contactor using highly packed fiber bundle. The concentrations at the end of the fiber extractor calculated at several operational conditions were compared with experimental results. The fiber extractor could be completely predicted by a plug flow model without axial dispersion. A parameter used in the model equations, $k_a{\sigma}$ called the product of mass transfer coefficient and mass transfer area per unit length of the fiber extractor in the axial direction, which was determined by a curve-fitting, was confirmed to be a unique characteristic value of the fiber extractor, and was about 0.0327cm2/sec.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.327-334
• /
• 2018

Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of $108^{\circ}$ when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.