• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.91-98
• /
• 1989

The analysis of a single stereo model is not sufficient in applying for some large structures, therefore the precise coordinate analysis photogrammetric block adjustment method should be considered. The distribution of control points has a great influence on the error characteristics of the block adjustment results. Thus, the unit model method is applied to the photogrammentric adjustment procedure to study error characterestics with different distributions of control points. Through this study, the second order polynomial equations about bridging distance and plane error are developed in block adjustment of terrestrial photogrammetry. Comparing the block adjustment method and a single model method, root mean square error of the block adjustment method is 0.44mm, and a single model method is 1.06mm.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.6-17
• /
• 2002

Refraction tomography was developed to interpret subsurface velocity structure easily in topographic conditions. It was applied to synthetic refraction data to find the factors for optimization of applicability of refraction tomography such as configuration of profiling and its length, spacing of geophones and sources and topographic conditions. Also, low velocity layer near VSP hole could be detected by joint inversion with refraction and VSP data. Continuity of subsurface velocity structure in two different spread lines for area of house land development was good in case of applying our algorithm and velocity structure was classified quantitatively to evaluate rippability for engineering works.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.23-31
• /
• 1977

For the metal complex of $d^1$ configuration with the octahedrally coordinated ligands, the crystal field parameter, 10Dq, is calculated from first principles within the framework of the crystal field theory. With the point charge model, the configuration interaction is introduced by use of the Shull-L$\"{o}$wdin functions. Through the Integral Hellmann-Feynman Theorem, the higher order effect is visualized. It is found that the higher order effect on 10Dq is about $50{\%}$ of the first order effect. Since 3d function is angularly undistorted and radially equally distorted in $E_g\;and\;T_{2g}$ states, due to the octahedral potential, the calculated 10Dq is still the unique parameter for the splitting.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.229-236
• /
• 2014

Quadrature Amplitude Modulation (QAM) is widely used in contemporary wired and wireless communications systems. In this paper, I propose a generalized triangular quadrature amplitude modulation (gTQAM) that includes the square quadrature amplitude modulation (SQAM), TQAM, and ${\Theta}$-QAM as special cases. Therefore, the proposed gTQAM forming a lattice of arbitrary triangles provides a versatile structure in signal constellations compared to other QAM schemes. For M-ary gTQAM, I derive an exact closed-form expression for the bit error rate (BER), and present the optimal signal constellations for given SNR values from the derived BER expression. Finally, I validate the derived BER results through computer simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.986-994
• /
• 2012

This paper is concerned with the application of the vision control algorithm with weighting matrix in robot point placement task. The proposed vision control algorithm involves four models, which are the robot kinematic model, vision system model, the parameter estimation scheme and robot joint angle estimation scheme. This proposed algorithm is to make the robot move actively, even if relative position between camera and robot, and camera's focal length are unknown. The parameter estimation scheme and joint angle estimation scheme in this proposed algorithm have form of nonlinear equation. In particular, the joint angle estimation model includes several restrictive conditions. For this study, the weighting matrix which gave various weighting near the target was applied to the parameter estimation scheme. Then, this study is to investigate how this change of the weighting matrix will affect the presented vision control algorithm. Finally, the effect of the weighting matrix of robot vision control algorithm is demonstrated experimentally by performing the robot point placement.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.167-172
• /
• 2016

Commercial analysis has been used for a lot of reasons such as improving the distribution structure, operational cost savings. However, existing commercial assay system is mostly flow through the analysis of the population and the environment around the store. Therefore, in this paper, we design a path weighted data analysis system for efficient product arrangement. It is not applying the analysis method of the existing commercial sales center but the data analysis system applying the weight to the form of customers' paths in a store. In conjunction with the existing POS system, it provides effective product placement in department stores, such as supermarkets, convenience stores. To this end, a system that maximizes efficiency of product placement in stores, receiving path data, converting them into statistics data that apply the weight, and printing out them into a visualized monitering system for the manager to see was designed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.63-77
• /
• 1996

This study suggests that experts' group decision support system (Experts'GDSS) should be helpful to solve specific planning/design problems. Dealing with AHP (Analytic Hierarchical Process), as a group decision model, maximal covering model, as a facility allocation model, and GIS (Geographic Information System; ARC/INFO in this study), as a spatial representation model, this study seeks to examine the implication of GDSS (Group Decision Support System) in the housing facility allocation. The results of this study clearly demonstrated that experts' GDSS acted its positive role, systematically providing the relative weights among the planning variables and objectives. Among different expert groups (e.g., planners, scholars, and public administrators), this study showed that there were certain differences in their decision structures, which generated different solutions in facility allocation. The further study, however, remains to investigate the more systematic implementation of GDSS in planning problems; for example, reducing the conflicts between different groups with different purposes.

• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.11-19
• /
• 1994

레이저 가공기술은 재료가공 분야에서 넓은 응용분야를 가지고 있으며, 특히 절단, 용접, 열처리 등의 가공분야에서 고정밀도와 자동화의 용이성으로 인해 생산성이 높은, 고부가가치의 첨단응용 기술로 부각되고 있다. 특히 레이저절단은 타 절단법에 비교되는 절단정도, 열영향, 생산성, 작업 환경등의 각종 우위성으로 박판 및 후판절단분야에서 급속한 보급을 보이기 시작하였다. 현재 대 부분의 레이저 가공기는 CNC화 되어가고 있는 추세이며, 레이저 절단의 경우 생산성증대 및 고 정밀화를 위하여 CAD/CAM인터페이스에 의한 자동화가 필연적인 상황이다. 뿐만아니라 고출력 레이저 발전기를 가공 기본체에 탑재한 탑재형 레이저가공기의 출현으로 대형부재의 절단이 가능 하게 되었으며, 더불어 절단공정의 무인화를 지향하는 각종 시스템이 개발되고 있다. 이와 같은 무인화, 생산성증대, 작업시간단축과 러닝 코스트 및 재료의 절감을 위한 노력의 일환으로 컴 퓨터에 의한 자동 및 반자동 네스팅 시스템의 개발을 들 수 있다. 레이저에 의한 2차원 절단응 용분야에서의 네스팅작업은 설계가 끝난 각 부품의 절단작업의 전단계로서 수행되며, 일반적으로 네스팅공정이 완료되면 절단경로를 결정하고 가공조건과 함께 수치제어공작기계의 제어에 필요한 NC코드를 생성하게 된다. 최근에는 이와 같은 네스팅 시스템이 일부 생산현장에 적용되고 있 으나 이러한 시스템들의 대부분이 외국에서 개발된 것을 수입하여 사용하는 실정이다. 2차원 패턴의 최적자동배치문제는 비단 레이저 절단과 같은 열가공 분야에서 뿐만 아니라 블랭킹 금형, 의류, 유리, 목재등 여러분야에서 응용이 가능하며 패키지의 국산화가 시급한 실정이다. 네스 팅작업은 적용되는 분야에 따라 요구사항과 구속조건이 달라지며 이로 인해 알고리즘과 자료구 조도 달라지게 되나 공통적인 목표는 주어진 영역안에서 겹침없이 배치하면서 버림율을 최소화 하는 것이다. 지난 10여년간 여러 산업의 응용분야에서는 네스팅시스템의 도입이 활발하게 이 루어지고 있는데 수동에 반자동 및 자동에 이르기까지 다양하나 자동네스팅시스템의 경우 배치 효율의 신뢰성이 비교적 부족하기 때문에 아직까지는 생산현장에서 기피하는 실정이다. 배치알 고리즘의 관점에서 볼 때 이러한 문제들은 NP-complete문제로 분류하며 제한된 시간안에 최적의 해를 구하기가 가능한 조합 최적화 문제로 알려져 있다. 따라서 이 글에서는 레이저 절단분야 에서의 네스팅시스템에 관한 개요와 최근의 연구동향 그리고 몇 가지 전형적인 네스팅 알고리 즘들을 소개하고 비교분석을 통해 개선점을 간략하게 논의하고자 한다.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.1
• /
• pp.33-36
• /
• 2007

Generally, word balloon have played a role to connect the script with character in comics. The location of word balloons depicts the process of story in comics, because they are located by reading order. Therefore, it is very Important works to generate and place word balloons, these work usually is processed manually by comic writer's. In this paper, we discuss the automated generation and placement of word balloon. For this, we modeled 6 kinds of word balloons. And these word balloons are placed by heuristic method based on EPFLP. We also generate the tail of word balloon automatically by considering the direction and reference points of word balloon.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.572-584
• /
• 1993

In this paper, we propose an efficient method to allocate carrier frequencies so as to minimize intermodulation products in two-level SCPC systems in which Hub station and many Remote stations communicate each other through the satellite transponder. Also we present a very efficient method to evaluate intermodulation products with highly reduced CPU time in two-level SCPC systems. We study and analyze the performance of some possible methods to extend the Deletion and Insertion operation, which is proposed by Okinaka and applied to only one-level SCPC systems, to two-level SCPC systems. The proposed algorithm is carefully selected out of these methods and is optimized, which shows superior performance to any other published strategies, especially in that it has very excellent characteristics in terms of generality for practical application. Considering the fact that most published strategies are seldom applicable to actual two-level SCPC systems, we can say that the proposed algorithm in this paper is quite meaningful.