Acknowledgement
Supported by : 한국과학재단
The analysis of a single stereo model is not sufficient in applying for some large structures, therefore the precise coordinate analysis photogrammetric block adjustment method should be considered. The distribution of control points has a great influence on the error characteristics of the block adjustment results. Thus, the unit model method is applied to the photogrammentric adjustment procedure to study error characterestics with different distributions of control points. Through this study, the second order polynomial equations about bridging distance and plane error are developed in block adjustment of terrestrial photogrammetry. Comparing the block adjustment method and a single model method, root mean square error of the block adjustment method is 0.44mm, and a single model method is 1.06mm.
지상사진측량에서 단모델의 해석은 구조물이 커지면 적용하기가 어려워지므로 정밀한 좌표해석에서는 불럭조정기법을 사용하여야 한다. 기준점의 배치는 불럭조정결과의 오차특성에 커다란 영향을 주게 된다. 따라서 기준점 배치에 따른 오차분포특성을 조사하기 위해 블럭조정 기법을 이용한 단위모델법을 이용하였다. 연구결과에서 지상사진측량에 있어서 브리징 간격과 오차에 관한 2차다항식의 오차관계식을 개발하였다. 또한 블럭조정기법과 단모델기법의 비교에서 평균제곱근 오차가 0.44mm와 1.06mm로 나타냈다.
Supported by : 한국과학재단