• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.38-46
• /
• 2020

LOw Frequency Analysis Recording (LOFAR) and Demodulation of Envelop Modulation On Noise (DEMON) grams are bearing-time-frequency plots of underwater acoustic signals, to visualize features for passive sonar. Those grams are characterized by tonal components, for which conventional data coding methods are not suitable. In this work, a novel LOFAR/DEMON gram compression algorithm based on binary map and prediction methods is proposed. We first generate a binary map, from which prediction for each frequency bin is determined, and then divide a frame into several macro blocks. For each macro block, we apply intra and inter prediction modes and compute residuals. Then, we perform the prediction of available bins in the binary map and quantize residuals for entropy coding. By transmitting the binary map and prediction modes, the decoder can reconstructs grams using the same process. Simulation results show that the proposed algorithm provides significantly better compression performance on LOFAR and DEMON grams than conventional data coding methods.

• Journal of Radiation Protection and Research
• /
• v.32 no.4
• /
• pp.158-167
• /
• 2007

It is required that the neutron dosimetry be present to monitor the reactor vessel throughout its plant life. The Ex-vessel Neutron Dosimetry Systems which consist of sensor sets, radiometric monitors, gradient chains, and support hardware have been installed for 3-Loop plants after a complete withdrawal of all six in-vessel surveillance capsules. The systems have been installed in the reactor cavity annulus in order to characterize the neutron energy spectrum over the beltline region of the reactor vessel. The installed dosimetry were withdrawn and evaluated after a irradiation during one cycle and then compared to the cycle specific neutron transport calculations. The reaction rates from the measurement and calculation were compared and the results show good agreements each other.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.35-39
• /
• 2007

Recently Usage statistics are widely available from online content providers. However. the statistics are not yet available in a consistent data container and the administrative cost of individual provider-by-provider downloads is high. The Standardized Usage Statistics Harvesting Initiative (SUSHI) is developing an automated request and response protocol for moving Project COUNTER (Counting Online Usage of Networked Electronic Resources) Code of Practice usage statistics from providers to library electronic repositories. SUSHI will help libraries make better decisions by reducing the administrative overhead of using Project COUNTER statistics. Publishers in the recording and exchange of usage statistics for electronic resources, initially journals and databases. By following COUNTER's Code of Practice, vendors can provide library customers with Excel or CSV (comma delimited) files of usage data using COUNTER's standardized formats and data elements. The result is a consistent, credible, and compatible set of usage data from multiple content providers. On this study, We propose the acquisition model of usage data based on SUSHI for KESLI that is overseas electronic journal consortium in korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.427-433
• /
• 2001

This paper proposes a web-based 3 dimensional face modeling system that makes a realistic facial model efficiently without any 30 scanner or camera that uses in the traditional methods. Without expensive image-input equipments, we can easily create 3B models only using front and side images. The system is available to make 3D facial models as we connect to the facial modeling server on the WWW which is independent from specific platforms and softwares. This system will be implemented using Java 3D API, which includes the functions and conveniences of developed graphic libraries. It is a Client/server architecture which consists of user connection module and 3D facial model creating module. Clients connect with the facial modeling server, input two facial photographic images, detects the feature points, and then create a 3D facial model modifying generic facial model with the points according to the procedures using only the web browser.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.572-580
• /
• 2013

In this case study, I examined the microseismic safety management system of Deep Heat Mining Basel (DHMB) as EGS Geothermal Project which was conducted in Basel, Switzerland. EGS Geothermal Power projects which require induced seismic event by stimulation for creation of EGS geothermal reservoir have to be controlled pressure and flow rate of stimulation by establishment of microseismic safety management system. Traffic light system and Communication response procedure of DHMB project to respond step by step corresponding microseismic event intensity through continuous monitoring during stimulation period have been managed and established in advance of stimulation. However, the project was discontinued because of an earthquake to occur larger than expected one due to post-injection seismicity occurring in the geothermal reservoir after completion of injection for stimulation. The result of post analysis, Real-time traffic light system was verified to need a establishment of new microseismic safe management system to be considered post-injection seismicity phenomenon.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.202-209
• /
• 2005

The rapid development of digital media and communication network urgently brings about the need of data certification technology to protect IPR (Intellectual property right). This paper proposed a new watermarking method for embedding owner's audio signal. Because this method uses an audio signal as a watermark to be embedded, it is very useful to claim the ownership aurally. And it has the advantage of restoring audio signal modified and especially removed by image removing attacks by applying our LBX(Linear Bit-expansion) interleaving. Three basic stages of our watermarking include: 1) Encode . analogue owner's audio signal by PCM and create new digital audio watermark, 2) Interleave an audio watermark by our LBX; and 3) Embed the interleaved audio watermark in the low frequency band on DTn (Discrete Haar Wavelet Transform) of image. The experimental results prove that this method is resistant to lossy JPEG compression as standard image compression and especially to cropping and rotation which remove a part of Image.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.457-463
• /
• 2019

Damage control is a very important preliminary and primary activity to improve the survivability of naval ships by preventing spread of damage, and various types of onboard damage control training are conducted regularly on naval ships. The scenarios for these trainings should be well organized to improve the training efficiency. However, at present, it takes much time and effort to generate the training scenarios and there is a problem that the procedures and contents of the scenarios vary widely depending on the persons who generate, without the established methods and standards. In this paper, an efficient generation method of damage control onboard training scenarios has been established, especially for flood and fire o n naval ships. Also a computer program has been developed based on the established method. The results showed that this method and computer program reduce the time and effort to generate these scenarios, and it is hoped that the method be used as a ROK Navy Standard.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.131-144
• /
• 2012

MDD is suitable to satisfy constraints of development of mobile applications. So, there are various studies about applying MDD to the developments of mobile application but systematic development methods about UML profile for PIM/PSM of mobile applications and model transformation techniques are needed. This paper suggests that a development technique about UML profile for PIM/PSM of mobile applications and a model transformation techniques with the profiles. We classify stereotypes by the characteristics of mobile application to compose profiles and suggest development guidelines of profiles for PIM/PSM. On the suggested model transformation process, the PIM with the profiles is transformed to the intial PSM with the mapping rules and the PSM is transformed to the refined PSM with templates which reflected detailed information of a mobile platform. We developed a location based service mobile application with the suggested techniques on the Android platform and compared with other techniques to validate usefulness of the suggested techniques.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.10
• /
• pp.349-360
• /
• 2015

In recent year, phishing attacks are flooding with services based on the web technology. Phishing is affecting online security significantly day by day with the vulnerability of web pages. To prevent phishing attacks, a lot of anti-phishing techniques has been made with their own advantages and dis-advantages respectively, but the phishing attack has not been eradicated completely yet. In this paper, we have studied phishing in detail and categorize a process of phishing attack in two parts - Landing-phase, Attack-phase. In addition, we propose an phishing detection methodology based on web sites heuristic. To extract web sites features, we focus on URL and source codes of web sites. To evaluate performance of the suggested method, set up an experiment and analyze its results. Our methodology indicates the detection accuracy of 98.9% with random forest algorithm. The evaluation of proof-of-concept reveals that web site features can be used for phishing detection.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.651-658
• /
• 2002

This paper suggests the scenario composition supporting method, which can be used to perform integration test based on specification, and implemented a scenario composition supporting tool. To compose scenario for object-oriented integration testing, requirement specification, Process definition table and program to table relation diagram are used. In addition, requirement trace table is created. It can check user's requirements, quickly and exactly, dividing former three fables into the stages of requirement analysis, design, and test. The output of scenario composition supporting tool plays a guide part in composing scenario. This tool can reduce scenario composition effort of quality for the checking team and prevent an omission of requirement and input of errors during the test.