• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.129-129
• /
• 2004

본 연구에서는 나노스케일 절삭가공(nanometric cutting process)시에 미세 팁과 가공표면사이에서 발생하는 현상들에 대하여 분자동역학적 시뮬레이션을 통하여 살펴보았다 본 연구의 목적은 실험적으로는 파악하기 어려운 극미세 가공에서 발생하는 나노트라이볼로지적 현상을 이해하고, 이를 토대로 기계적 가공에 기반하여 개발된 '기계-화학적 나노리소그래피(Mechano-Chemical Scanning Probe Lithography)' 공정을 개선, 발전시키는데 있다. 기계-화학적 나노리소그래피 기술은 극초박막의 리지스트(resist)를 미세탐침을 이용하여 기계적 가공으로 제거하고 이로인해 표면으로 드러난 모재부분을 화학적 에칭에 의해 추가로 가공하여 원하는 패턴형상을 얻어내는 기술이다.(중략)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.83-90
• /
• 2014

The spiral up milling of an aluminum alloy was performed in this study. In accordance with the cutting condition, the surface roughness behavior and significance of the research with regard to specific factors were analyzed. The cutting speed, feed, and depth of the cut were found to be statistically significant. A higher cutting speed improved the surface roughness. On the other hand, as the feed and depth of the cut increase, the surface roughness decreases. An interaction effect between the feed and depth of the cut was detected. According to the surface roughness in relation to the cutting conditions, the model showed non-linear behavior.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.62-62
• /
• 2003

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.185-185
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.246-246
• /
• 2004

현재 비구면렌즈를 만들기 위해서는 다양한 방법이 있다. Glass종류의 가공시 초정밀 절삭가공기(DTM)에서 가공하거나 정밀 연삭기를 가지고 가공하게 된다. 이 과정에서 렌즈 표면에 공구 흔적이나 표면거칠기 개선을 위해 연마작업을 하게 되는데, 사용하는 장비가 폴리싱 머신이다. 축대칭인 폴리싱머신의 경우 X, Z, $\theta$로 동시 3축제어가 가능하다. 하지만 이 장비의 경우 연마에서 원하는 형상정밀도와 표면거칠기를 얻기 위해 각축들의 위치정밀도와 분해능이 높은 부품을 사용하여 기계자체가 고가라는 점이 단점으로 작용한다.(중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.111-113
• /
• 2008

반도체 산업에 있어 package 절단에 사용되는 diamond micro blade의 성능은 그 반도체의 자체적 성능에서뿐만 아니라 생산 비용 등에 있어서도 매우 중요한 비중을 차지하고 있다. 이러한 블레이드의 성능향상을 위해 윤활첨가제(흑연, $MoS_2$)의 첨가효과에 대해 마모성능시험을 통해 알아보고 비교 분석을 행하였다. 그 결과 윤활첨가제의 첨가를 통해 절삭 중 블레이드 표면에서 발생할 수 있는 응착 마멸현상이 줄어들었음을 확인할 수 있었고, 윤활첨가제의 적절한 첨가량에 대해 재조명 해 볼 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.159-159
• /
• 2012

티타늄-알루미늄(Titanium-Aluminum) 질화물(Nitride)은 고경도 난삭재의 고능률 절삭 분야에 사용되는 공구의 수명 향상을 위한 표면처리 소재로 각광을 받고 있다. 본 연구에서는 아크 소스로 TiAl 타겟을 사용 하였으며, $N_2$ 유량을 변화시키며 코팅을 실시하였다. 그 결과 경도 883~2510 Hv로 나타나는 것을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.604-610
• /
• 1989

This paper is concerned with the machinability of fine ceramics(Al$_{2}$O$_{3}$) by using sintered diamond tools. For this purpose, ceramics cutting experiments under various cutting conditions such as cutting speed, feed rate, and others were carried out. The main results are follows : (1) During the cutting of fine ceramics, the used tools were found to be slightly chattering at cutting speed of 70m/min, and at cutting speed of higher than this I found the fine ceramics difficult to be cut. (2) When I used a tool with large nose radius, there occured a small amount of wear on the flank of the tool. However, at the early stage of fine ceramics cutting, the tools with smaller nose radii were required mainly to prevent the chipping of the ceramics. (3) When the materials were dry-cut, the appropriate cutting speel was found to be lower than 40m/min, and when the materials were dry-cut, I could cut them without any difficulty even at the speed of 70m/min, the surface roughness of ceramics cut at the speed of 70m/min was considerly fine. (4) It is generally believed that the principal cutting force is the largest in the case of steels cutting, but I found the thrust cutting force to be larger than any other cutting forces in the case of ceramics cutting.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the cutting efficiency of coarse grit diamond burs with air-turbine handpiece on natural tooth. Materials and methods: Four groups of coarse grit diamond bur were selected: Komet (A), Shofu (B), Premier (C), and Mani (D). The extracted maxillary central incisors were used, and ten cuts were made on each specimen, using the rotary diamond burs. The surface of each bur was measured at the upper, middle, and bottom of the bur with confocal laser scanning microscope and imaged with SEM. The data were analyzed with one-way ANOVA and t-test at the significance level of 0.05. Results: The surface roughness was measured. At the A diamond bur, the Sa values were $52.93\;{\mu}m$, $48.32\;{\mu}m$, $46.79\;{\mu}m$, $45.06\;{\mu}m$, and $43.43\;{\mu}m$ for control, test 1, 2, 3, and 4 respectively. The Sa values were $50.68\;{\mu}m$, $45.62\;{\mu}m$, $44.41\;{\mu}m$, $44.10\;{\mu}m$, and $42.46\;{\mu}m$ for B diamond bur, $58.02\;{\mu}m$, $55.53\;{\mu}m$, $52.22\;{\mu}m$, $48.26\;{\mu}m$, and $45.36\;{\mu}m$ for C diamond bur, and $50.11\;{\mu}m$, $46.73\;{\mu}m$, $45.46\;{\mu}m$, $42.58\;{\mu}m$, and $41.80\;{\mu}m$ for D diamond bur. Surface roughness after each bur use showed significant changes, but no significant difference was found in surface roughness change between bur systems. Conclusions: Surface roughness in the same bur system showed significant differences after each tooth preparation. However no statistically significant differences were found in surface roughness between bur systems. The SEM images between control and test 4 showed the abraded particles.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.184-191
• /
• 1996

The purpose of this paper is to investigate components of surface roughness in turning with respect to the tool configuration and the changes of working conditions. Tool configurations of SNMG120404, SNMG120408 and DNMG150404, DNMG150408 are used, and working conditions such as cutting speed 3nd feed are varied. That is, the changes of cutting speed and feed were 150, 200, 250 m/min and 0.05, 0.1, 0.3 mm/rev, respectively. From the results obtained by the frequency analysis with spectrum, it is noted that the surface roughness was influenced most significantly by the feed. It is also observed that the vibration of bite had an effect on both the surface roughness and the surface waviness. Moreover, the influence of surface roughness increases as the feed decreases. Lastly, the vibration of the spindle was found to have little influence on the surface roughness in normal cases and the tool configuration was not the components of the surface roughness.