• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.456-461
• /
• 2010

A study was conducted to investigate the effect of topophysis, and uniting method of rootstock and scion on rooting and subsequent growth of stenting-propagated cut rose ($Rosa$ $hybrida$ Hort.) in an effort to develop an efficient stenting propagation method for domestic rose cultivars. Four cultivars used in this study were two standard type cultivars 'Sweet Yellow' and 'Hanmaum', and two spray type cultivars 'Chelsi' and 'May'. Scions were grafted on cuttings of a rootstock $Rosa$ $indica$ 'Major'. The stenting-propagated scion-rootstock unions were planted in rockwool cubes ($50{\times}50{\times}50mm$, Delta, Grodan, Denmark) and were placed in a graft-take chamber for five days before being placed on misted greenhouse beds. The rootstock was removed of all leaves and nodes. Both the base of scions and top of stocks were simultaneously cut at a $45^{\circ}$ angle for grafting. Scions were prepared as single node cuttings, each with a five-leaflet leaf. Three positions of topophysis used were 7-9th (top), 4-6th (middle), and 1st-3rd (bottom) nodes from the stem base. Four uniting materials used were tube, tube + parafilm wrap, tube + clothespin, and clothespin. Rooting and growth were affected by the topophysis and cultivar. The best topophysis for rooting was 7-9th (top) nodes in all cultivars. Topophysis affected percent rooting, and number of roots, length of the longest root, and but not weight, shoot length and graft-take. Rooting and growth were affected by the uniting method and cultivar. Tube uniting method generally showed higher percentage graft-take, percent rooting, and number of roots than other methods. However, rootstock and scion union was not complete in this treatment. On the whole, the greatest rooting and subsequent growth of stenting-propagated plants were found in the tube + clothespin method. Except 'Sweet Yellow', rooting and growth were not adequate in the clothespin method. The results suggested that a tube + clothespin method was the most effective, and this method may be used as a substitute to save labor compared to a tube + parafilm wrap method which is currently being used in commercial nurseries.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.91-91
• /
• 1995

에탄올에 의한 급성독성은 에탄올, 아세트알데히드 및 에탄을 대사산물의 변형생성물질 등에 기인하므로 알콜 섭취 후 혈중 에탄을 농도 및 아세트알데히드의 농도를 낮추는 것은 음주에 의한 급성 중독상태에 머무는 시간을 단축시키는데 중요하다. 본 실험에서는 Bacillus subtilis natto sp.를 식물 추출액을 배지로 하여 배양한 후 단백 분해효소로 고분자물질을 절단하여 얻은 발효액인 바이오짐(상품명: Biozyme)을 주성분으로 한 '비지니스(조선무약합자회사)' 의 인체 혈중 알콜대사 촉진작용을 검색하였으며, 비지니스 및 바이오짐이 랫드의 에탄을 대사에 미치는 효과를 검토하여 다음과 같은 결과를 얻었다. 인체 혈중 알콜대사 촉진작용을 검색하기 위해 알콜 섭취 전과 후의 혈중 에탄올 농도를 비교하였는데, 대조군에 비해 비지니스 투여군이 30분 후부터 2시간 후까지 혈청 알콜농도가 낮게 나타났다. 대조군의 혈청 알콜농도를 100으로 하였을 때 알콜 투여 30분, 60분, 90분, 120분 경과 후 시험군은 각각 대조군의 84.3%, 89,0%, 85.9%, 75.8%를 나타내어 평균 16% 정도 낮았다. 시험군의 AUC는 대조군의 AUC의 89%로 비지니스 투여군에서 혈액내 알콜의 제거가 빠르게 진전된다는 것을 보여주었다. 또한, 랫드의 에탄을 대사에 미치는 효과를 알아보고자 바이오짐 및 비지니스 투여 후 채혈하여 혈중 에탄을 및 아세트알데히드 농도를 측정하였다. 비즈니스 투여시 혈중 알콜 농도는 알콜 투여 60분 경과후 가장 큰 감소 효과(대조군:83.70$\pm$11.80mg/이, 시험군:45.12$\pm$6.63mg/d1, 47% 감소)를 나타내었으며, 시험군의 AUC는 대조군에 비해 30% 감소하였다. 혈중 아세트알데히드 농도는 투여 60분 후 비지니스 투여군(4.56$\pm$0.51nmol/$m\ell$)이 대조군(6.45$\pm$0.64nmo1/$m\ell$)에 비해 유의성 있는 감소(29%)를 나타내었으며, 시험군의 AUC는 대조군에 비해 35% 감소하였다. 바이오짐 투여시 혈중 에탄을 농도가 알콜 투여 2시간 경과 후 가장 큰 감소 효과(대조군:49.10$\pm$5.20mg/dl, 시험군:25.90$\pm$7.16mg/d1, 47% 감소)를 나타내었으며, 시험군의 AUC는 대조군에 비해 39% 감소하였고, 혈중 아세트알데히드의 농도는 투여 60분후 시험군(3.96$\pm$0.07nmo1/$m\ell$)이 대조군(6.45$\pm$0,64nmo1/$m\ell$)에 비해 유의성 있는 감소(39%)를 나타내었으며, 시험군의 AUC는 대조군에 비해 48% 감소하였다 한편, 시험관내 에탄올 대사 효소에 대한 바이오짐의 효과를 검색해본 결과 바이오짐(2.0 $\mu\textrm{g}$/assay)에 의해 Aldehyde dehydrogenase(1.5unit/assay)의 활성이 14% 증가되었다. 본 연구의 결과로 볼 때, 비지니스 및 바이오짐은 음주 후 상승된 혈중 에탄을 농도 및 아세트알데히드의 농도를 현저히 감소시키는 효과가 있었다.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.485-494
• /
• 2013

$CO_2$ Monitoring, Mitigation and Verification (MMV) is the essential part in the Carbon Capture and Storage (CCS) project in order to assure the storage permanence economically and environmentally. In large-scale CCS projects in the world, the seismic time-lapse survey is a key technology for monitoring the behavior of injected $CO_2$. In this study, we developed a basic process procedure for 3-D seismic baseline data from the Aquistore project, Estevan, Canada. Major target formations of Aquistore CCS project are the Winnipeg and the Deadwood sandstone formations located between 1,800 and 1,900 ms in traveltime. The analysis of trace energy and similarity attributes of seismic data followed by spectral decomposition are carried out for the characterization of $CO_2$ injection zone. High trace energies are concentrated in the northern part of the survey area at 1,800 ms and in the southern part at 1,850 ms in traveltime. The sandstone dominant regions are well recognized with high reflectivity by the trace energy analysis. Similarity attributes show two structural discontinuities trending the NW-SE direction at the target depth. Spectral decomposition of 5, 20 and 40 Hz frequency contents discriminated the successive E-W depositional events at the center of the research area. Additional noise rejection and stratigraphic interpretation on the baseline data followed by applying appropriate imaging technique will be helpful to investigate the differences between baseline data and multi-vintage monitor data.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.419-430
• /
• 2000

The purpose of this study was to compare the microleakage pattern of preventive resin restoration using conventional composite resin and flowable composite resin that recently developed. 60 sound premolar teeth were allocated to three groups. Flowable composite resin was used for the experimental groups(Group I and II) and conventional resin for the control group(Group III). After composite filling and sealant application, all teeth were thermocycled and evaluated for microleakage under light microscope. Additionally, a variety of voids formed inside restorations were also evaluated. Data were analyzed statistically using Kruskal-Wallis test and/or Mann-Whitney U-test. The results of the present study were as follows. 1. Microleakage found in all samples was only limited to the interface of restoration margin and enamel. 2. The flowable composite resin groups (Group I, II) generally showed less microleakage than control groups (conventional preventive resin restoration) (p<0.05) 3. Various types of voids were observed in most specimens. Especially, there was a tendency for more and larger voids to be found in group I, II than group III (p<0.05).

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.323-329
• /
• 2006

The aim of this study was to evaluate the retrievability of Resilon as a root canal filling material Twenty-seven human single-rooted extracted teeth were instrumented utilizing a crown down technique with Gates-Glidden burs and ProFile system. In group1 (n = 12) canals were obturated with gutta percha and AH-26 plus sealer using a continuous wave technique and backfilled. In group 2 (n = 15) Resilon was used as a filling material. Then teeth were sealed and kept in $37^{\circ}C$ and 100% humidity for 7 days. For retreatment, the samples were re-accessed and filling material was removed using Gates-Glidden burs and ProFiles. Teeth were sectioned longitudinally to compare the general cleanliness and amount of debris $({\times}\;75)$ using SEM. Chi-square test was used $({\alpha}\;=\;0.05)$ to analyze the data. The total time required for removal of filling materials was expressed as mean ${\pm}SD$ (min) and analyzed by the Student t-test $({\alpha}\;=\;0.05)$, Required time for retreatment was $3.25\;{\pm}\;0.32$ minutes for gutta percha/ AH 26 plus sealer and $3.05\;{\pm}\;0.34$ minutes for Resilon. There was no statistically significant difference between the two experimental groups. There was no significant difference between the groups in the cleanliness of the root canal wall. This study showed that Resilon was effectively removed by Gates-Glidden burs and ProFiles.

• Korean journal of food and cookery science
• /
• v.4 no.2
• /
• pp.31-38
• /
• 1988

The chicken cooked by three different methods were put and sensory evaluation, mechanical and chemical composition test. The results were as following : 1. Standard recipe were as followig : \circled1 Kettle cooking was chicken 700 g, waxyrice 100 g, garlic 30 g, water 2000 cc, time 60 min. \circled3 Pressure cooking was chicken 700 g, waxyrice 100 g, garlic 30 g, water 2000 cc, time 30 min. \circled3 Microwave cooking was chicken 700g, waxyrice 100 g, garlic 30 g, water 1000 cc, time 30 min. 2. Sensory evaluation \circled1 There were no typical difference of the color of soupstock with in the three cooking methods. \circled2 The turbidity of soupstock was from Kettle cooking, microwave cooking and pressure cooking in turn. \circled3 There were no typical difference of the viscosity of soupstock with in the three cooking methods. \circled4 The kettle cooking was the best of mouthfeel and taste. \circled5 There were no typical difference of muscle, with in the three cooking methods. 3. Mechanical Test \circled1 The result of the cutting force of muscle which measured by rheomether were the leg muscle was more tough than breast muscle. \circled2 The viscosity of boiled rice was from kettle cooking, pressure cjooking and microwave cooking in turn. \circled3 The result of the turbidity of soupstock which measured by spectrophotmeter was from kettle cooking, pressure cooking and microwave cooking in turn. 4. Proximate chemical composition \circled1 Protein of muscle was 20.30-25.67%, Soupstock was 0.29-0.72% \circled2 Fat of muscle was 27.29-47.15% , Soupstock was 37-68.38%. \circled3 Potasium of muscle was 2.75-3.6 mg, Soupstock was 1.15-6.3 mg. \circled4 Iron of muscle was 1.17-1.39 mg, Soupstock was 0.96 mg.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.93-102
• /
• 2005

Manufacturing conventional column base plate requires much manpower and time. In this research, a new method for constructing column base plate is introduced to improve on conventional methods through the use ofcast steel that is available for adjusting base plate thickness and enlarging base plate stiffness. The main purposes include reducing welding work, enlarging base plate stiffness, and clarifying the stress flow. Also, construction convenience and improvement in quality can be expected. For developing this cast steel base plate, test specimens of conventional and cast steel base plates are made and tested to analyze strength and stiffness. Also, the efficiency for long-term use is checked by fatigue tests. From these comparative tests, cast steel base plates have the same strength and stiffness as conventional base plates.

• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.91-96
• /
• 2005

The silicon-on-insulator (SOI) wafer fabrication technique has been developed by using ion-cut process, based on proton implantation and wafer bonding techniques. It has been shown by SRIM simulation that 65keV proton implantation is required for a SOI wafer (200nm SOI, 400nm BOX) fabrication. In order to investigate the optimum proton dose and primary annealing condition for wafer splitting, the surface morphologic change has been observed such as blistering and flaking. As a result, effective dose is found to be in the $6\~9\times10^{16}\;H^+/cm^2$ range, and the annealing at $550^{\circ}C$ for 30 minutes is expected to be optimum for wafer splitting. Direct wafer bonding is performed by joining two wafers together after creating hydrophilic surfaces by a modified RCA cleaning, and IR inspection is followed to ensure a void free bonding. The wafer splitting was accomplished by annealing at the predetermined optimum condition, and high temperature annealing was then performed at $1,100^{\circ}C$ for 60 minutes to stabilize the bonding interface. TEM observation revealed no detectable defect at the SOI structure, and the interface trap charge density at the upper interface of the BOX was measured to be low enough to keep 'thermal' quality.

• The Korean Journal of Pesticide Science
• /
• v.8 no.1
• /
• pp.63-70
• /
• 2004

Sulfonylurea(SU)-resistant Monochoria korsakowii has resently been found in rice fields in Korea. A quick, practical and accurate test of confirming herbicide resistance is necessary to take timely management decision. This article describes a rapid reliable assay to detect SU-resistant biotype of Monochoria korsakowii. Up to now, the resistance to SU has been usually checked by application seedlings with herbicide. This application technique is time consuming and not practical. Therefore, we have developed efficient, rapid and practical diagnosis which allow easy detection of the SU-resistant Monochoria korsakowii by survival rate and regenerated plant length to herbicide application after cutting plants $0.5\sim1cm$ from the planted surface. This new rapid diagnosis can determine the SU resistance of the Monochoria korsakowii within 7 days at least. If the resistance of Monochoria korsakowii is identified by the rapid diagnosis, the selection of herbicide according to the stages of plants for the effective control is very important. The resistant biotype which treated with SU herbicide-based mixtures survived from the fields could effectively be controlled by soil application of butachlor+pyrazolate GR or by foliar application of the mixtures of bentazone SL and 2,4-D SL.