• Applied Microscopy
• /
• v.36 no.2
• /
• pp.109-118
• /
• 2006

The physicochemical properties of damaged hair by irradiation of ultraviolet-B (UV-B) have been investigated by using transmission electron microscope and scanning electron microscope. The range of irradiation of hair irradiated for expectative 6 hours, 12 hours, 24 hours and 48 hours with stimulated ultraviolet ray. The treated hairs showed characteristic morphological damage pattern in the cornified cell of matrix and the cuticle following time past. The various sized vacuoles in the endocuticle of the cuticular cells was formed. The statistically significant differences in diameter of cuticular cell were observed in terms of tranverse swelling by formation of vacuoles. The hair cortex and matrix undergo long term exposure to UV-B radiation. The macrofibrils of cortex appeared to be affected most by UV-B, although the morphology and volume of melanin granule was not changed. The physicochemical destruction of hair matrix and cuticular cells is largely accelerated by long term irradiation of UV-B.

• Resources Recycling
• /
• v.12 no.4
• /
• pp.58-64
• /
• 2003

A study on the preparation of RDF with ASR materials from shredder line of end-of-life vehicles has been peformed by using hot molding method. ASR materials used in the work were plastics, fibers and sponge which were cut by less than 10 mm in size prior to hot molding and 40, 60 and 80 mm mold in diameter were employed for RDF forming. It was found that heating temperature, heating time and mixing ratio of materials played an important role in the hot molding of ASR materials. Density of RDF samples Prepared in the work was in the range of 0.5∼0.9gr/ml depending on the hot molding conditions and it was decreased with increase in the content of sponge. Breaking strength of RDF samples was observed to 0.8∼3.0MPa and it was also increased with increase in density of RDF samples. Finally, when heating temperature was elevated, density of RDF was increased due to Increase in molten part of ASR materials which resulted in the enhancement of breaking strength of RDF.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.734-737
• /
• 2006

This study was carried out to establish the manufacturing process of barley leaf powder tea. The optimal manufacturing process among many trials was determined with sensory evaluation. Finally established process and operation conditions were as follows: pretreatment (cutting and washing), steaming ($100^{\circ}C$, 30 sec), primary drying and roasting ($130^{\circ}C$, 40 min), rolling (RT, 25 min), middle drying and roasting ($60^{\circ}C$, 30 min), final drying and roasting ($55^{\circ}C$, 25 min), drying ($60^{\circ}C$, 20 min), roasting ($85^{\circ}C$, 20 min), and powdering (120 mesh). The barley leaf powder tea produced by this process mainly consisted of dietary fiber (33.8%), amino acids (12.9%), minerals (4.7%) and ${\beta}-carotene$ (6.9 mg%).

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.171-171
• /
• 2003

발아현미란 적당한 온도와 수분, 산소 등을 공급해 현미의 싹을 1~5 mm까지 발아시킨 것으로 현미의 영양과 기능을 극대화시키면서 식미는 현미보다 훨씬 부드러운 쌀이다. 발아현미 등 발아곡식이 주목받기 시작한 것은 1993년 독일의 한 식품연구소에서 곡식의 발아시 발아전에는 없던 새로운 영양성분이 생겨나거나 증가한다는 연구발표가 계기가 되었다. 현미에는 식물성 섬유질을 비롯한 각종효소, 비타민, 미네랄 등 영양소가 다량 함유되어 몸에 좋다는 것은 널리 알려진 사실이다. 그러나 현미가 갖는 뛰어난 효능에도 불구하고 백미를 주식으로 하고 있는 이유는 현미의 조리가 어렵고 부드럽게 씹히지 않고 꺼칠하여 식미가 떨어지기 때문이다. 이러한 현미의 문제점을 개선하여 풍부한 영양을 고루 섭취하고 간편한 취사와 부드러운 조직감으로 식미 기호도를 높인 발아현미가 등장하였다. 따라서, 찹쌀과 멥쌀 발아현미에 대한 영양성분과 품질특성을 조사하여 발아현미밥 및 가공제품 개발에 대한 기초자료로 제시하고자 한다. 4$0^{\circ}C$에서 20시간 발아시킨 찹쌀 발아현미(수분함량 15.45%)와 멥쌀 발아현미(수분함량 15.02%)의 품질 특성중 amylose 함량은 각각 4.9%, 17.9%, 환원당은 4.91%, 2.28%, 유리당은 찹쌀 발아현미가 glucose 0.42%, sucrose 0.15%, maltose 0.27%이고 멥쌀 발아현미가 glucose 0.59%, sucrose 0.50%, maltose 0.24%였다. 찹쌀과 멥쌀 발아현미의 색차값은 각각 L값 60.30, a값 2.12, b값 23.52과 L값, 59.51, a값 3.15, b값 23.04이다. 호화도는 1.67%, 5.21%이고, 조직감중 hardness는 7.53 kgf, 8.93 kgf로 멥쌀 발아현미가 높았다. 찹쌀 발아현미의 아밀로그램 특성은 호화 초기온도가 42$^{\circ}C$였으며, breakdown값은 94, set back값은 -48이었으며, 멥쌀 발아현미의 특성은 호화 초기온도가 7$0^{\circ}C$였으며, breakdown값은 0, set back값은 123이었다. 비타민 E 함량은 찹쌀 211.79 $\mu\textrm{g}$/kg, 멥쌀 310.59 $\mu\textrm{g}$/kg이고, 총식이섬유 함량은 4.21%, 3.17%이다. 발아현미 원곡간의 향기패턴은 차이가 나지 않았으며 발아현미 제조 후 찹쌀, 멥쌀 모두 이취 성분은 거의 없었다. 발아현미의 절단 내면 미세구조를 관찰한 결과 찹쌀 발아현미 cell이 멥쌀 발아현미보다 작았으며, 표면 구조도 찹쌀 발아현미가 더욱 조밀하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.338-345
• /
• 1991

Velopharyngeal incompetence (VPI) is a condition of inadequate functional valving between the oral and nasal cavities that results in hypernasal speech and nasal air escape. VPI is caused by the following factors ; cleft palate, soft palate defect, pharyngomegaly, velopharyngeal sphincter muscle anomaly and maxillary advancement surgery, etc. Velopharyngeal function is assessed by a variety of measures that include speech evaluation, cephalogram, airflow study, videofluoroscopy and nasoendoscopy. The management of VPI is classified into four main groups ; prosthesis, insertion of implant, palatoplasty and pharyngoplasty. Pharyngeal flap is the most common surgical procedure for correcting VPI since Schoenborn's report in 1875. We report seven cases of VPI which were treated by modified modified superiorly based pharyngeal flap with good results.

• Composites Research
• /
• v.23 no.6
• /
• pp.61-66
• /
• 2010

In this paper, the variation of mechanical properties of T800 carbon/epoxy composites according to the forming pressure, which was referred to previous studies on a filament winding process, were investigated. The specimens of all the tests were fabricated by an autoclave de-gassing molding process controlling forming pressure (absolute pressures of 0.1MPa, 0.3MPa, 0.7MPa including vacuum) and water jet cutting after fabricating composite laminates. Various tensile tests were performed for in-plane properties and interlaminar properties were also measured by using Iosipescu test jig. Fiber volume fraction was measured to correlate the property variation and the forming pressure. This properties are expected to be utilized in the design of Type III pressure vessel for hydrogen vehicles which uses the same carbon fiber (T800 carbon fiber) for the filament winding process.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.93-97
• /
• 2012

Heat treatment effect of polyethylene (PE) separators was investigated after storage at 80, 100 and $120^{\circ}C$ for 1 h. All the samples showed enhanced tensile strength and modulus after heat treatment, but thermal shrinkage up to 15% was observed in PE films having newly formed dimple structure on the surface of fiber after annealed at 100 and $120^{\circ}C$. Although there was 5% of thermal shrinkage after annealing at $80^{\circ}C$, no such serious changes in PE fiber was observed. Furthermore, the separator was found to have enhanced cell performance with 1.3 and 2.3 times higher tensile strength and modulus after heat treatment at $80^{\circ}C$ for 1 h.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.6
• /
• pp.553-560
• /
• 2007

Purpose: We evaluated the standard uptake value (SUV) of F-18 FDG at PET/CT for differentiation of benign from malignant tumor in primary musculoskeletal tumors. Materials and Methods: Forty-six tumors (11 benign and 12 malignant soft tissue tumors, 9 benign and 14 malignant bone tumors) were examined with F-18 FDG PET/CT (Discovery ST, GE) prior to tissue diagnosis. The maxSUV(maximum value of SUV) were calculated and compared between benign and malignant lesions. The lesion analysis was based on the transverse whole body image. The maxSUV with cutoff of 4.1 was used in distinguishing benign from malignant soft tissue tumor and 3.05 was used in bone tumor by ROC curve. Results: There was a statistically significant difference in maxSUV between benign (n=11; maxSUV $3.4{\pm}3.2$) and malignant (n=12; maxSUV $14.8{\pm}12.2$) lesions in soft tissue tumor (p=0.001). Between benign bone tumor (n=9; maxSUV $5.4{\pm}4.0$) and malignant bone tumor (n=14; maxSUV $7.3{\pm}3.2$), there was not a significant difference in maxSUV. The sensitivity and specificity for differentiating malignant from benign soft tissue tumor was 83% and 91%, respectively. There were four false positive malignant bone tumor cases to include fibrous dysplasia, Langerhans-cell histiocytosis (n=2) and osteoid osteoma. Also, one false positive case of malignant soft tissue tumor was nodular fasciitis. Conclusion: The maxSUV was useful for differentiation of benign from malignant lesion in primary soft tissue tumors. In bone tumor, the low maxSUV correlated well with benign lesions but high maxSUV did not always mean malignancy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.39-48
• /
• 1978

1) The decrease in strength of Raschel twines at Raschel joints is regarded to be due mainly to the frictional force between yarns and the unbalanced tensile distribution by the deformation of the joints. The rate of the decrease is about $13\%$ in lengthwise pull and 22 to $26\%$ in breadthwise pull. 2) The 3-course joint is less in deformation and stronger than the 2-course joint in all cases of pulls. 3) The variation of Raschel joint strength $T_R$ with the angle $\varphi$ between the adjacent bars is expressed as $T_R=T_{R0}-k\varphi$ where $T_{R0}$ is the strength at $\varphi=0^{\circ}$ and K is a constant. 4) The tensile strength ${\sigma}R$ and tile breaking energy $E_R$ of Raschel netting are given by $${\sigma}R=KN\;or\;${\sigma}R=T_RN$$ and $$E_R=AN$$ respectively, where N is the number of meshes at the pulling side, and K and A are constants. But the breaking energy of the netting is almost constant independent of tile variation of N. 5) The Raschel netting with some bars cut already breaks from tile joints of the bars next to the cut bars and its tensile strength, breaking energy, and breaking elongation decrease largily even if only one bar is in already cut state. 6) The tearing strength of Raschel netting is almost equal to the tensile strength of its single joint pulled by two bars. 7) The twisted joint is much more excellent in strength than the knot or the Raschel joint. The knot strength is 69 to $76\%$, and the Raschel joint strength is 71 to $74\%$ in lengthwise pull and 62 to $67\%$ in breadthwise pull, respectively, of the twisted joint strength.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.318-332
• /
• 2000

The purpose of this study was to investigate the effects of demineralized freeze-dried bone (DFDB) on mechanically exposed pulp of dog by evaluating the pulpal inflammation and healing process, formation of dental hard tissue, and structural changes of fibroblasts of the remaining pulp tissue. Teeth of 4 dogs, weighing 10kg, were used in this study. Class V cavities were prepared followed by exposed the pulp tissue mechanically by sterilized round bur. In control group, exposed pulps were capped with calcium hydroxide paste followed by sealed with IRM. In experimental groups, the exposed pulps of one group were capped with the collagen and those of the other group were capped with DFDB. All cavities were sealed with same manor as control group. The animals were sacrificed at the intervals of 3, 7, 14, and 28 days for histopathlogic evaluation. The specimens were observed by the light microscope and trans-electron microscope. The results were as follows: 1. Pulp necrosis was not observed in all groups. Inflammatory response was disappeared from 1 week in control group and group 2. But it was not disappeared until 2 weeks and also irregular arrangement of odontoblasts was showed at the lateral walls of root canal just beneath the amputated site of the pulp in group 1. 2. Dentinal bridge was formed incompletely at 2 weeks but it was formed completely at 4 weeks in control group. Odontoid tissue was also found in control group at 4 weeks from treatment. Amputated site of pulp was encapsulated with fibrous tissue and odontoblast and dentinal bridge was not found in group 1. Preodontoid tissue and reparative dentin which were formed by odontoblast differentiated around DFDB were found, but dentinal bridge was not found in group 2. 3. Cell with large basophillic-stained nuclei infiltrated to amputated site and DFDB at 1 week from treatment in control group and group 2. They were found more in group 2 than in control group. Odontoblasts arranged more regularly and reparative dentin was found more as time elapsed. 4. Dentin-formative odontoblasts which showed ultramicrostructure of cytoplasm with polarized nucleus, rEM, Golgi complex, secretory granules, secretion of organic matrix in control of group and group 2. In regards to above results, the demineralized freeze-dried bone(DFDB) induce odontoblastic differentiation and further come up to the dentin formation in amputated pulp.