• The Korean Journal of Applied Statistics
• /
• v.25 no.2
• /
• pp.311-319
• /
• 2012

The simplest and the most important distribution in survival analysis is exponential distribution. Koziol and Green (1976) derived Cram$\acute{e}$r-von Mises statistic's randomly censored version based on the Kaplan-Meier product limit estimate of the distribution function; however, it could not be practical for a real data set since the statistic is for testing a simple goodness of fit hypothesis. We generalized it to the composite hypothesis for exponentiality with an unknown scale parameter. We also considered the classical Kolmogorov-Smirnov statistic and generalized it by the exact same way. The two statistics are compared through a simulation study. As a result, we can see that the generalized Koziol-Green statistic has better power in most of the alternative distributions considered.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.129-138
• /
• 2019

Ammunition is an integral element of a weapon systems and in calculating fighting strength. The Korea Army utilizes the basic load (B/L) concept to supply ammunition smoothly. The required supply rate (RSR) is the basis of a B/L that is estimated from real combat data that includes a troop's mission and operation terrain. The current RSR is based on Korean War data and the sample mean has some problems in applications to modern combat. Therefore, this study used Korea Combat Training Center (KCTC) data that is similar to real combat to estimate rifle ammunition RSR. We used a quantile of truncated Weibull distribution to estimate rifle ammunition RSR considering that rifle ammunition consumption data in KCTC is truncated. As a result, we obtained a rifle ammunition RSR which covers most ammunition consumption by reflecting the individual consumption of rifle ammunition.

• Applied Microscopy
• /
• v.41 no.4
• /
• pp.249-255
• /
• 2011

Neurons utilize a large quantity of energy for their survival and function, and thereby require active mitochondrial function. Mitochondrial morphology shows dynamic changes, depending on the cellular condition, and mitochondrial dynamics are required for neuronal development and function. In this study, we found that the length of mitochondria in the distal axon is significantly shorter than that of mitochondria in dendrites or proximal axons of cerebral cortical neurons, and the reason for this difference is the local fission within the axon. We also found that suppression of Drp1, a key regulator of mitochondrial fission, resulted in significant elongation of mitochondria in axons. Collectively, these results suggest that local mitochondrial fission within the axon contributes to region-dependent mitochondrial length differences in the axons of cortical neurons.

• Journal of Welding and Joining
• /
• v.5 no.1
• /
• pp.23-33
• /
• 1987

Plasma arc cutting is a fusion cutting process in which a gas constricted arc is employed to produce high temperature, high velocity jet at the workpiece. Even though the plasma arc cutting has been wid¬ely used in the industry, very little work has been done on the analysis of the process. In this paper, the kerf width was numerically analyzed by soving the temperature distribution in base metal under consideration of the latent heat effect. In modelling the heat flow problem, the heat intensity of the plasma arc was assumed to have a Gaussion distribution in the transverse direction and expone¬ntially decreasing in the thickness direction. The thermal efficiency and the heat input ratio of the top surface were experimentally deterimned for various thickness and cutting conditions, and used in numerical calculation of the kerf width. The experimental results were in eonsiderabely good agreement with the theoretically predicted kerf width.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.445-451
• /
• 2013

We consider the estimators for the parameters of the exponential model with limited replacements under the type I censoring scheme. Also, we propose the desirable number of replacements to provide the similar effects in terms of the mean square errors.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.149-155
• /
• 2013

Commonly, one seeks a particular pattern suitable for stock cutting and the number of such patterns through linear programming. However, since the number of the patterns increases exponentially, it is nearly impossible to predetermine all the existing patterns beforehand. This paper thus proposes an algorithm whereby one could accurately predetermine the number of existing patterns by applying Suliman's feasible pattern method. Additionally, this paper suggests a methodology by which one may obtain exact polynomial-time solutions for feasible patterns without applying linear programming or approximate algorithm. The suggested methodology categorizes the feasible patterns by whether the frequency of first occurrence of all the demands is distributed in 0 loss or in various losses. When applied to 2 data sets, the proposes algorithm is found to be successful in obtaining the optimal solutions.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.307-313
• /
• 2014

In order to predict the post-cracking tensile behavior of fiber reinforced concrete, it is necessary to evaluate the fiber orientation factor which indicates the number of fibers bridging a crack. For investigation of fiber orientation factor on a circular cross-section, in this paper, cylindrical steel fiber reinforced concrete specimens were casted with the variables of concrete compressive strength, circular cross-section size, fiber type, and fiber volumetric ratio. The specimens were cut perpendicularly to the casting direction so that the fiber orientation factor could be evaluated through counting the number of fibers on the circular cross-section. From the test results, it was investigated that the fiber orientation factor on a circular cross-section was lower than 0.5 generally adopted, as fibers tended to be perpendicular to the casting direction. In addition, it was observed that the fiber orientation factor decreased with an increase of the number of fibers per unit cross-section area. For rational prediction of the fiber orientation factor on a circular section, a rigorous model and a simplified equation were derived through taking account of a possible fiber inclination angle considering the circular boundary surface. From the comparison of the measured data and the predicted values, it was found that the fiber orientation factor was well predicted by the proposed model. The test results and the proposed model can be useful for researches on structural behavior of steel fiber reinforced columns with a circular cross-section.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.196-201
• /
• 2013

As there is no failure data for the entire lifecycle of a product, when analyzing reliability measures based on early failure data only, there may be a significant error between the estimated mean life and the real one, because it can be underestimated, or on the other hand, it can be overestimated when analyzing reliability measures based on a large amount of censored data with the failure data. To resolve the issue, this study proposes an optimal sampling estimation procedure that selects the proportion of censored data to estimate the optimal distribution with the idea that the estimated distribution could be approximated as closely as the real life distribution. This would work if we sampled the optimal proportion on the censored data, because failure data has real intrinsic distribution in any situation. We validate the proposed procedure using an actual example. If the proposed method is applied to the maintenance policy of TWC (Train to Wayside Communication) system, then we can establish the optimal maintenance policy. Thus, we expect that it will be effective for improvement of reliability and cost savings.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.519-526
• /
• 2000

This study is to investigate the recurrence possibility of consecutive dry years such as the long dry period around 1900 in the annual rainfall data at Seoul station. The truncation levels, as the criterion for the dry years, are decided such as to make the occurrence of dry years follow the Poissonian distribution, which assures independent occurrence of dry years. For the truncation level of mean-0.5stdv, the occurrence of dry years is found to satisfy the Poissonian distribution weakly with 99% significance level, but for those of mean-0.75stdv and mean-stdv with 95% significance level. For these truncation levels, the long dry period around 1900 is divided into several short consecutive dry years. The Poisson process has then been applied to derive the occurrence probability of consecutive dry years. For the truncation level of mean-0.75stdv or below, the Poisson process was found to reproduce similar occurrence probabilities to the observed. Especially for the lowest truncation level used in the study (mean-stdv), we could see that the occurrence probability of consecutive dry years estimated for the data collected before the long dry period around 1900 was higher that those for the data collected after the long dry period, thus, it could be concluded that the possibility of long dry periods is decreasing recently.cently.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1106-1111
• /
• 2014

This paper has a purpose to find out the characteristics of pressure distribution according to the POD shape installed in the Hydrofoil vessel, using the CFD. The results showed that as we cut the POD cross-section's basic shape along the x-axis from 0 to 8cm, the viscous resistance had decreased, but then the pressure resistance had increased modestly. However, the cutoff length of POD cross-section shape has close to 9cm, the viscous drag had increased and the pressure drag had decreased. As a result, we found out that the pressure resistance made more effects in POD shape than the viscous resistance, and the total resistance decreased near the 9cm of cutoff length.