• Clinics in Shoulder and Elbow
• /
• v.11 no.1
• /
• pp.37-40
• /
• 2008

Purpose: We wanted to evaluate the normal glenoid size of Koreans in their 7th and 8th decades by conducting Computed tomographic (CT) studies. Materials and Methods: The CT images were obtained from the normal scapulae of the patients (mean age: 68.8) who had humeral fracture. A display workstation version 2.0.73.315 was used to measure the scans to determine the maximal superoinferior (SI) and anteroposterior (AP) diameters of the glenoid vault. Results: The average diameters of curvature of the glenoid were 31.2 mm (range: 27 to 34 mm) in the superior-inferior direction and 26.1mm (range: 22 to 31mm) in the anterior-posterior direction. Conclusion: This study showed the normal glenoid size of Koreans and it is different from the size that the international literature reported. It should be an important factor for the treatment of fracture or in designing arthroplasty implants.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.72-72
• /
• 2009

• Childhood Kidney Diseases
• /
• v.6 no.1
• /
• pp.68-74
• /
• 2002

Purpose: Suprapubic bladder aspiration(SBA) of urine is the most reliable method to obtain urine avoiding contamination in non-toilet trained infants. Ultrasonography is a useful tool for guiding the anatomic location as well as for direct visualization during procedure. We evaluated the success rate and complication of ultrasound(US) assisted SBA Methods. Sixty infants who visited Ewha Womans University Mokdong Hospital, with suspected urinary tract infection were randomly divided into the US assisted (n=32) and blind SBA(control, n=28) group. In US assisted SBA group, the anteroposterior(AP), transverse, and sagittal diameters and the volume of the bladder were measured. In the blind SBA group, urine was blindly aspirated when the urinary bladder was palpated at the suprapubic area. The rate of successful urine aspiration, the number of attempts until successful aspiration, aspirated urine volume were compared between the two groups. Results: The success rate was $100\%$(32/32) in the US assisted group, which was significantly higher than $85.7\%$(24/28) of the control group (P<0.05). The aspirated urine volume in the US assisted group was $7.4{\pm}3.7\;mL$, which was significantly higher than $4.5{\pm}3.4\;mL$ of the control group (P<0.05), The diameters and volume of bladder in successful aspiration were $2.1{\pm}0.7\;cm$ in AP diameter, $3.1{\pm}0.6\;cm$ in transverse diameter, $4.2{\pm}1.0\;cm$ in sagittal diameter and $15.2{\pm}10.4\;mL$ in volume, which were significantly higher than those ($1.7{\pm}0.3\;cm,\;1.7{\pm}0.3\;cm,\;1.8{\pm}0.7\;cm,\;2.4{\pm]0.6\;cm,\;3.9{\pm}2.5$) of the control group (P<0.05) The correlations between the AP(r=0.78), transverse (r=0.72), sagittal(r=0.91) diameter and bladder volume were significant (P<0.05). SBA was $100\%$ successful in the AP diameter >3 cm, transverse diameter >4 cm, depth >4 cm and bladder volume >5 mL. Conclusion: US assistance can significantly improve the success rate of SBA in infant with suspected urinary tract infection. (J Korean Soc Pediatr Nephrol 2002 ; 6 : 68-74)

• Development and Reproduction
• /
• v.8 no.1
• /
• pp.43-47
• /
• 2004

The present paper studied neurosecretory cell types and their seasonal secretory activity in the eyestalk of Palaemon macrodactylus. The samples were monthly collected in Nakdong estuary for one year. The eyestalk consisted of lamina ganglionaris, medulla externa medulla interna, and medulla terminaris. four types of neurosecretory, A-, B-, C- and D-cells are found in the eyestalk. The A-cells are located in the medulla externs. Althoush the B- and C-cells are located in the medulla interna and medulla terminalis, B-cells are predominant in medulla interna and C-cells are usually distributed in medulla terminaris. The size of D-cells are larger than other types of cells in size. The neurosecretory cells except D-cells show a remarkable change with month. The A-, B-, and C-cells are activated from March and April to July, and decreased at August.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.9.1-9
• /
• 1982

The authors have measured various dimensions of the larynx of twenty adult cadavers. (male; 13, female; 7) The result were as follows, 1) Transverse diameter between the greater horns of the hyoid bone; M.52.58mm, F.43.07mm. 2) Transverse diameter between the lesser horns of the hyoid bone; M.36.20mm, F.30.20mm. 3) Transverse diameter of the thyroid cartilage; M.50.58mm, F.42.58mm. 4) Transverse diameter of the cricoid cartlage; M.30.14mm, F.26.94mm. 5) Distance from the lower margin of the hyoid bone to the thyroid notch; M.12.83mm, F.10.92mm. 6) Distance from the lower margin of the thyroid cartilage to the lower margin of the cricoid cartilage; M.16.40mm, F.10.26mm. 7) Distance from the upper margin of the thyroid cartilage to the lower margin of the cricoid cartilage; M.34.65mm, F.34.61mm. 8) Anteroposterior diameter of the cricoid cartilage; M.25.32mm, F.20.01mm. 9) Transverse diameter of the epiglottis; M.29.32mm, F.22.08mm. 10) Vertical diameter of the epiglottis; M.35.90mm, F.27.90mm. 11) Transverse diameter between the cuneiform tubercles; M.17.69mm, F.13.52mm. 12) Length of the vocal fold; M.11.61mm, F.10.40mm. 13) Transvers diameter of the vocal fold; M.18.62mm, F.18.27mm. 14) Distance from the upper margin of the epiglottis to the vocal fold; M.42.45mm, F.34.52mm. 15) Anteroposterior length of the vocal fold; M.19.25mm, F.10.70mm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.250-250
• /
• 2013

단일벽 탄소나노튜브(Single-walled nanotubes, SWNTs)는 나노스케일의 크기와 우수한 물성으로 인하여, 전자, 에너지, 바이오 분야로의 응용이 기대되고 있다. 특히 SWNTs의 직경을 제어하게 되면 튜브의 전도성 제어가 훨씬 수월하게 되어, 차세대 나노전자소자의 실현을 앞당길 수 있으며 이러한 이유로 많은 연구들이 현재 행해지고 있다. SWNTs의 직경제어 합성을 위해서는 현재 열화학기상증착법(Thermal chemical vapor deposition; TCVD)이 가장 일반적으로 이용되고 있으며, 합성 촉매와 합성되는 튜브의 직경과의 크기 연관성이 알려진 후로는, 촉매의 크기를 제어하여 SWNTs의 직경을 제어하고자 하는 연구들이 활발하게 보고되고 있다. 특히, 촉매 나노입자의 직경이 1~2 nm 이하로 감소될 경우, SWNTs의 직경 분포가 어떻게 변화할 것인지가 최근 가장 중요한 관심사로 남아 있으나, 이러한 크기의 금속입자는 나노입자의 융점저하 현상이 발현되는 영역이므로, SWNTs의 합성온도 영역에서 촉매 금속입자는 반액체(Semi-liquid) 상태로 존재할 것으로 추측하고 있다. 본 연구에서는 고온의 SWNTs 합성환경에서 금속나노촉매의 유동성을 제한하기 위하여 나노사이즈의 기공이 규칙적으로 정렬된 다공성 물질인 제올라이트를 촉매담지체로 이용하였고, 이 때 다양한 합성변수가 SWNTs의 직경에 미치는 영향을 살펴보고자 하였다. SWNTs의 합성을 위해 실리콘 산화막 기판 위에 제올라이트를 도포한 후, 합성 촉매로서 전자빔증발법을 통하여 수 ${\AA}$에서 수 nm 두께의 철 박막을 증착하였다. 합성은 메탄을 원료가스로 하여 TCVD법으로 실시하였다. 주요변수로는 제올라이트 종류, 증착하는 철 박막의 두께, 합성온도를 설정하였으며, 이에 따라 합성된 SWNTs의 합성수율 및 직경분포의 변화를 체계적으로 살펴보았다. SWNTs의 전체적인 합성수율의 변화는 SEM 관찰결과를 이용하였으며, SWNTs의 직경은 AFM 관찰 및 Raman 스펙트럼의 분석에서 도출하였다. 실험결과, 제올라이트 종류에 따라서는 명확한 튜브직경 분포의 변화 없이 비교적 좁은 직경분포를 갖는 SWNTs가 합성되었으며, 합성온도가 $850^{\circ}C$ 이하로 감소되면 합성수율이 현저히 감소되는 것을 알 수 있었다. 촉매박막의 두께가 1 nm 이상인 경우에서는 직경 5 nm 전후의 나노입자가 형성되었으며, 이때 SWNTs의 합성수율은 높았으나 다양한 직경의 튜브가 합성이 된 것을 확인할 수 있었다. 반면, 촉매입자의 크기가 2 nm 이하에서는 합성수율은 다소 저하되었으나, SWNTs의 직경분포의 폭이 상대적으로 훨씬 좁아지는 것을 알 수 있었다. 추후, 극미세 촉매와 저온합성 환경에서의 합성수율 향상을 위한 합성공정의 개량이 지속적으로 요구된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.87-95
• /
• 2002

원주의 항력 감소와 원주 주위 유동의 제어에 대하여 실험적으로 연구하였다. 원주 주위 유동을 제어하기 위하여 작은 제어봉을 원주 전방에 설치하였다. 실험시 원주 직경(D=30mm)에 기초한 레이놀즈수는 $Re=2 {/times} 10^4$이었다. 제어봉의 직경(d)은 4mm, 5mm, 6mm, 7mm로 변화시켰으며, 원주와 제어봉 사이의 거리(L)를 조절하면서 원주의 표면압력분포와 후류속도를 측정하였다. 제어봉으로부터의 와 유출이 사라지는 임계거리 (critical distance) $ L_C$는 $ L_C$ /D=1.5+0.83d이었는데, $ L_C$를 전후로 유동특성과 항력값이 크게 바뀌었다. 특히 원주와 제어봉 사이의 거리가 임계거리보다 짧은 경우에는 항력이 감소하다가 $ L_C$보다 크게 되면 증가하는 경향을 보였다. 제어봉의 직경이 d/D=0.233인 경우, L/D=2.013의 조건에서 원주는 약 29%의 항력 감소를 보였고, 전체 항력은 L/D=1.833조건에서 약 25% 항력이 감소하였다.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.121-130
• /
• 2003

The purpose of this study was to evaluate the possibile clinical application of electroplating to increase diameter of an orthodontic wire, through examining the change of physical properties. The diameter of stainless steel orthodontic wire was increased from 0.016 inch to 0.018 inch by electroplating in a bath of nickel sulfate 100g/L, nickel chloride 60g/L, boric acid 30g/L, and sodium chloride 50g/L, under the conditions of 1.7V, $25\~29^{\circ}C\;and\;3.1\~3.3pH$. During the electroplating, the rate of diameter increase was measured every minute. To investigate uniformity, the diameter was measured at three different locations of each wire specimen aster electroplating. An X-ray diffraction test was performed to analyze the nature of the electroplated metal. Following heat treatment to improve adhesion between the wire and electroplated metal, a three-point bending test was conducted to compare stiffness, field strength, and ultimate strength among four wire groups; 0.016 inch, electroplated 016, electroplated and heat-treated 016, and 0.018 inch wires. Through the comparison of each wire group, following results were obtained. 1. In the load-deflection graph, the curve of the electroplated group was Placed between that of the 0.016 inch group and the 0.018 inch group, and the owe was closer to the 0.018 inch group by heat treatment. 2. In the electroplated and heat-treated 016 wire group, the values of stiffness, yield strength and ultimate strength showed higher tendency than in the original 0.016 Inch group. Stiffness and ultimate strength showed statistically significant differences between two groups. 3. Stiffness, yield strength, and ultimate strength of electroplated wire presented lower values than those of 0.018 inch wire group. 4. Stiffness, yield strength, and ultimate strength of electroplated and heat-treated wire showed higher tendency than those of electroplated wire group, and ultimate strength showed statistically significant difference between two groups. 5. After electroplating, the difference in diameter between the three locations was within $0.1\~0.3\%$ variation, and showed no statistical significance.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.355-364
• /
• 2013

This study was conducted to investigate the population structure and dynamics of the Picea jezoensis stands which are located in Mt. Gyebangsan and surveyed from March to October 2012. Results showed that the diameter class distribution of P. jezoensis presented a reverse J-shaped distribution pattern with 32 trees less than 10 cm DBH, 20 trees in 10~30 cm DBH, and 11 trees more than 30 cm DBH. It showed seedlings and saplings of P. jezoensis seem to prefer areas with more sun light or with open upper layer. It was also observed that P. jezoensis preferes areas with organic soils and abundant water such as areas around stumps. Also, occurrences of P. jezoensis stands were analyzed through annual mean radial growth of the trees. And the results showed that the growth naturally or artificially occurred approximately on the years 1854, 1915, 1918, 1993 and 2002 years. Most of the gap-makers were classified as standing dead type with 23 individuals (45.1%).

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.868-869
• /
• 2015

지하 매설된 가스배관을 정기적으로 검사하기 위해서 가스 공급 및 용역업체에서는 주로 비피과검사 탐상장비인 MFL(Magnetic Flux Leakage) PIG(Pipeline Inspection Gauge)를 사용한다. 기존의 MFL PIG는 배관 내 유체(가스,오일 등)의 전후차단 압력의 흐름을 이용해 별도의 구동장치 없이 피그를 진행시켜 배관의 결함 유무를 평가하는 시스템이다. 하지만 10기압 이하의 낮은 운영압력과 T 분기관과 같이 급격한 곡관부가 존재하는 직경 16인치 이하의 도시가스 배관에는 기존의 시스템을 적용하기 어렵다. 이처럼 기존 MFL PIG의 적용이 불가한 도시가스 배관(직경 16인치 이하)을 활주하기 위해서는 우선 비파괴검사 시스템을 견인할 수 있는 추진 로봇이 필요하고 추진로봇에 적합한 자기누설 비파괴검사 시스템의 개발이 필요하다. 또한 비파괴검사 장비의 센서 시스템은 결함신호를 탐지하여 결함의 발생유무 및 결함의 형상을 판별하는 성능도 중요하다. 본 논문에서는 16인치 도시가스 배관의 검사를 위한 자기누설 비파괴검사 시스템의 기초설계와 대상 시스템의 자기적 특성을 분석한다. 또한 배관 외벽의 결함 발생 유무에 따른 자기누설 신호의 크기 및 분포변화를 3차원 유한요소법을 이용해 해석하여, 결함 검출 신호의 특성을 분석하는데 초점을 둔다.