• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.425-426
• /
• 2008

발전소의 제어 시스템은 제어 기간이 길어짐에 따라 제어 기기의 운전 특성이 변화하므로 최초 설계 및 운전때의 성능과는 다른 제어 특성을 나타낸다. 따라서 주기적으로 제어 성능을 평가하고 평가 결과에 따라서 제어 기기의 성능 개선 작업과 제어 시스템의 제어기 상수 최적화 등의 작업을 통하여 제어 성능을 최적으로 유지하여 제어 목적을 달성하도록 하여야한다. 제어성능 평가기법은 제어 목표 값에 대한 추종성을 평가하는 Set Print Analysis 방법을 주로 사용한다. 평가 지표는 Integral Absolute Error(IAE)와 같은 Error Integral 값과 Minimum Variance방법이 실용적으로 사용된다. 본 논문에서는 Non-Minimum Phase 특성으로 인하여 초기 운전 모드에서 정상 운전 모듈로의 원활한 전환이 어려운 수위 제어 시스템에서 제어 전환을 위한 최적 제어기 상수를 구하기 위하여 CPA 방법을 적용하였다. 일반적으로 제어성 평가는 설정치 변화에 대한 추종성을 평가하지만 본 논문에서는 제어 전환 시의 제어성 평가를 통하여 최적의 제어 전환 상수를 구하고자 하였다. 적용 결과, CPA기법은 설정시 추종성뿐만 아니라 제어 과도에서의 제어 전환 변수의 주종성에 적용하여 제어 전환을 최적화하는데도 유용함을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1548-1557
• /
• 1994

In this paper, the dual mode error correcting adaptive decoding algorithm which is adapted to the continuous phase frequency shift keying(CPFSK) modulation is presented as a technique for overcoming the distortion that reveals from the Rayleigh fading channel. The dual mode adaptive decoder nominally operates as a Viterbi decoder and switches to the burst error correcting mode, whenever the decoder detects an uncorrectable burst error pattern. Under the fading channel environment and when the usable memory quantity is restricted, the dual mode adaptive decoding algorithm shows an advantage in the BER performance over the interleaving technique, and also obtains the merit of not needing the large time delay that the interleaving technique requires. The experimental results from the computer simulation demonstrate the performance of the algorithm and verify the theoretical results.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.240-247
• /
• 2006

Tilt rotor aircraft is a multi-configuration airplane which has three independent flight modes; helicopter, conversion, and aiplane. The control surface mixer resign is reqctired to generate and distribute efficient control forces and moments in each flight mode. In the conversion mode, the thrust vector is changed from helicopter mode to airplane, therefore the thrust vector makes undesired forces and moments which affect on pitch, roll and yaw dynamics. This paper describes the design results of control surface mixer design which minimize the undesired forces and moments due to nacelles tilting angle change for 4O% scaled model.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.1-6
• /
• 2019

In this paper, we have developed an app that can control IPTV - Miracast and the Internet with Android 7.0 on the embedded board. The app can be controlled by the remote control of IPTV and can receive TV when using IPTV. And Miracast and Embedded board are put into the power saving mode. When one mode is selected in this way, the other two modes enter the power saving mode and the power saving control technology is applied to reduce energy consumption. The board used in this paper was Android version 7.1.2 version of Raspberry pie 3B / B + and Asus Tinker board s, and Android Studio program was used to make the app and a synchronization control program was also developed to operate with IPTV remote control. The operation of the Android start program using the power saving power control technology and the remote control synchronization control program developed in this way is confirmed to be normal operation as a result of applying to the actual IPTV.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.397-404
• /
• 2011

In this research, wish to suggest method to embody system that can accommodate defect of PLC and find actual propriety. Defect permission control system minimizes production damage because enables repair and checking without discontinuance and improve believability about whole system. Propose duplexing of system to embody this fault tolerant system. Therefore, composed control system that can permit defect or breakdown duplexings of various module proposing this system, and confirms to simulation and actuality kiln of defect permission control system through an application experiment, and compares for mean time between defect by estimate and defect special quality and system configuration of failure(failure) to improve believability of PLC control system together. In proposed system expression method and system mode and relation with operation mode, error discovery mode and switching tube of duplexing mode, and PLC's central processing unit of node study algorithm about master-standby conversion driving and continuous operation of 2 channels method that have 2 that is not one and deduced continuous operation method and result about defect permission in this algorithm and applies this result to actuality kiln control system and confirms continuous operation about PLC defect permission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1963-1970
• /
• 1999

Researches in draft recommendation H.263 have been made in ITU-T LBC group to broaden its range of useful application and to improve its compression performance. The form of added and revised draft text of H.263 is informally known as “H.263+”. In this paper, we analyzed the characteristics of H.263+ negotiable option modes for four image classes. Based on the analysis results, we proposed the adaptive selection scheme of H.263+ option modes by using a scene change detector for a mixed image class. In case of using the proposed scheme, we obtained the 1.6dB improvement in PSNR compared to the basic mode of H.263, and the 0.4~1.0 dB improvement in PSNR compared to the fixed usage scheme of H.263+ negotiable option modes. In respect to used bits per frame, fewer bits are produced than the basic mode H.263 and the foxed usage scheme of H.263+ option modes.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.5
• /
• pp.329-334
• /
• 2013

A positioning based service uses one's position information with GPS. This application also use the position based characters and change the smart phone to the vibration mode at the registered position. If the user register some places to be vibrated in the smart phone, the smart phone will be automatically changed to the vibration mode as the registered position is same with the position of GPS in the smart phone. If the smart phone is being leaving some distance from the position, the phone will be released from the vibration mode. Therefore, this paper propose aims for intelligent smart phone.

• Journal of KIISE:Software and Applications
• /
• v.27 no.11
• /
• pp.1133-1140
• /
• 2000

다중모드 대화에서 나타나는 대용어는 언어만을 사용하는 대화에서 나타나는 것과 비교하여 매우 다른 형태와 특징을 가진다. 그것은 행위나 시각이 대용 행위로 사용될 수 있기 때문이다. 본 논문에서는 터치스크린 인터페이스를 이용한 홈쇼핑 가구점 영역의 다중모드 대화 시스템에서 나타나는 다양한 대용어의 처리 방법을 알아본다. 먼저, 화면 대용어와 참조 대용어를 정의하여 다양한 형태의 대용어를 분류한다. 그리고 각 대용어를 처리할 수 있는 두 가지의 일반적인 방법을 제안한다. 하나는 지시 행위를 수반하거나 생략한 채 발화되어 현재 화면에 나타나 있는 아이템을 참조하는 대용어를 처리하는 단순한 매핑 알고리즘이다. 다른 하나는 다중 모드 대화 시스템을 위해 워커(Walker)의 센터링 알고리즘을 확장한 이중 캐시 구조의 센터링 알고리즘이다. 확장된 센터링 알고리즘은 발화와시각 정보 그리고 화면 전환 시간을 유지할 수 있기 때문에 다중모드 대화에서 발생하는 다양한 대용어를 처리하기에 적합하다. 실험에서 제안된 시스템은 40개의 대화에서 나타난 402개의 대용어(발화당 0.54)중에서 387개를 처리하여 96.3%의 정확도를 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.288-290
• /
• 2014

In this paper, Escape and BTA(Bus Turn Around) modes of master bridge IC are implemented, which supports MIPI(Mobile Industry Processor Interface) DSI(Display Serial Interface) standard. MIPI DSI master bridge IC sends RGB data and various commands to display module(slave) in order to test it. The Escape mode is designed to implement LPDT, ULPS and trigger message transmissions. The BTA mode is designed to obtain various status information from slave in reverse direction. Functional simulation results show that the designed Escape and BTA modes work correctly for various conditions defined in MIPI DSI standard.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.34-42
• /
• 2012

In this paper, a wide-input range CMOS multi-mode rectifier for wireless power transfer system is presented. The output voltage of multi-mode rectifier is sensed by comparator and switches are controlled based on it. The mode of multi-mode rectifier is automatically selected by the switches among full-wave rectifier, 1-stage voltage multiplier and 2-stage voltage multiplier. In full-wave rectifier mode, the rectified output DC voltage ranges from 9 V to 19 V for a input AC voltage from 10 V to 20 V. However, the input-range of the multi-mode rectifier is more improved than that of the conventional full-wave rectifier by 5V, so the rectified output DC voltage ranges from 7.5 V to 19 V for a input AC voltage from 5 V to 20 V. The power conversion efficiency of the multi-mode rectifier is 94 % in full-wave rectifier mode. The proposed multi-mode rectifier is fabricated in a $0.35{\mu}m$ CMOS process with an active area of $2500{\mu}m{\times}1750{\mu}m$.