• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.935-940
• /
• 2016

Recently, wireless power transmission system is gradually extended to technology in various fields such as lighting field, electric vehicles and smartphones wireless charging system. The largest of the two elements for high transmission efficiency of the wireless power transmission system are resonant coils and power amplifiers. In this paper, in order to build a high efficient wireless power transmission system, we introduce the resonance coil manufacturing method and high efficiency power amplifier design method that operates at 6.78MHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.781-786
• /
• 2015

In this paper, we analyzed characteristic of window type current transformer and we performed the optimal design consider to the loss; in order to design the current transformer figured signal of overcurrent warning circuit. The core size of window type current transformer was determined by the secondary coil turns. We analyzed current waveform, which is appeared by the number of coil turns on the core, we made sure the relation of secondary coil turns and load resistance in order to improve the non-sinusoidal wave by the flux saturation of the current transformer core. Additionally, we did improvement of the accuracy and optimal design through the transformation of the inner diameter and the stack length when the outer diameter of core is sustaining.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.97-102
• /
• 2011

We propose a novel displacement measurement method in the LVDT (Linear Variable Differential Transformer) structure. This proposed algorithm is independent of coil pattern, which may be implemented to PCB, or transformer component, because it is based on the signal-mapping method. we have manufactured several boards which have different coil patterns and our algorithm is ported into TMS320F2812 of TI DSP chipset. The output signal has high accuracy and high stability although PCB coil pattern are coarse.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1259-1266
• /
• 2022

Stowage planning is an essential process for safe loading by establishing, agreeing on, and systematically implementing a reasonable loading and securing method based on information on cargo, loading/unloading and the ship. In addition, depending on the plan, there may be a difference of about 14% or more in the loading amount per ship, which causes a tolerance rate and leads to an increase in sea freight charges. In this study, work environment and process standards for steel coil shipment, and classification regulations and guidelines related to steel coil shipment were analyzed. In addition, we developed a steel coil loading and placement automation system that derives an optimal loading plan through performance data-based shipping balancing and stability analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.299-312
• /
• 2013

Magnetite, a major constituent mineral of the Hongcheon carbonatite-phoscorite complex, was produced over three stages in each rock type and decreased in quantity toward the late stage. Electron microprobe analyses for magnetite revealed that Ti and V were detected in traces, but showed increasing tendency from early to late stage. On the contrary, Mg and Mn decreased distinctly, and it is the general differentiation trend of carbonatitic magma. Al also showed decreasing tendency in carbonatite and phoscorite, and Cr was mostly below detection limit except late phoscorite. In early stage, $Fe^{2+}$ was largely replaced by $Mg{2+}$ and $Mn^{2+}$, and $Fe^{3+}$ by $Al^{3+}$ in magnetite, but it has nearly pure composition in late stage. Tendency of increase in V and decrease in Mn toward late stage represents that magma differentiation progressed under the condition of decreasing oxygen fugacity. Low concentrations of Mg, Al, Cr and Ti, as well as the absence of olivine and phlogopite, suggest that the Hongcheon carbonatite-phoscorite complex was generated from depleted magma. Especially, lower concentrations of Mg in magnetite compared to other typical carbonatite-phoscorite complex, and abundant occurrence of Fe-carbonate minerals and quartz in late stage, suggest that magma differentiation of the Hongcheon carbonatite-phoscorite proceeded to the latest stage.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1015-1016
• /
• 2011

본 논문에서는 권선 방법에 따라 코일 U, V, W를 같은 층에 원주방향으로 배치한 집중권 권선 모델, 코일 U, V, W를 각각 한 층씩 원주 방향으로 배치한 분포권 권선 #1 모델, 코일에 경사각을 적용하여 코일 U, V, W를 한 층에 배치하는 분포권 #2 모델로 총 3가지 사양의 3상 코어리스 축방향 자속 발전기를 설계하였다. 3차원 유한요소 해석을 활용하여, 무부하 상태에서의 역기전력, 쇄교 자속 밀도와 외부 정류 회로를 구성한 부하 상태에서의 정류 전압, 정류 전류와 같은 전자기 특성에 대한 해석 및 특성 비교를 수행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1511-1517
• /
• 2008

The magneto-rheological fluid expresses different cohesiveness according to the strength of the external electric current. The magneto-rheological fluid damper, which uses such characteristics of the fluid, generates shear force due to the fluid's cohesiveness. The core can be said to determine the magneto-rheological fluid damper's performance. This study uses the finite element analysis to compare the performance of different electromagnetic forces, which are affected by the shapes of the coil, and thus to find the optimum design for the core. In addition, as a step to construct a high-efficient damper, we suggest a type of damper that can control multiple coils and compares the performance of this damper and that of the standard damper by comparing the performance of their electro-magnetic fields.

• Digital Contents
• /
• no.11 s.138
• /
• pp.72-73
• /
• 2004

올해로 35회를 맞는‘2004 한국전자전’이 지난달 6일부터 10일까지 닷새간 서울 코엑스에서 개최됐다. 산업자원부가 주최하고 한국전자산 업진흥회 등이 주관하는 이 행사는‘디지털 컨버전스의 경험’을 주제로 삼성전자와 LG전자 등 15개국에서 450여개 전자 관련 업체가 참가 해 최신 제품과 기술을 선보였다. 풍성한 가을 국내 최대의 디지털 잔치‘2004 한국전자전’의 이모저모를 살펴봤다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.142-149
• /
• 2019

The coils to transmit the electric energy are necessary to charge an electric vehicle wirelessly. There are several types of coils, from basic circular coils to DD-type coils for enhancing the coupling effect between two coils. However, DD-type coils with a good coupling effect between coils have a disadvantage in use because of the structure complexity of the power conversion device of transmitting and receiving side. In this paper, we propose a method to calculate the inductance value and to design the size of the spiral inductor which is convenient to fabricate when the power is transmitted wirelessly by using two coils in free space. Since the bifurcation phenomenon occurs when the XLm value is similar to the load resistance value in the resonator the XLm value was selected to be equal to the minimum load resistance value to minimize this phenomenon, and the inductance value required for the resonator was calculated. In order to realize the calculated inductance value by the spiral inductor, the relationship between the inductance value and the size, the number of turns, the total coil length of a spiral inductor was investigated. In addition, the change of coupling coefficient k according to the horizontal separation of two coils was examined and an appropriate inductor was selected.

• The Optical Journal
• /
• s.169
• /
• pp.20-21
• /
• 2017

2017 한국전자제조산업전(Electronics Manufacturing Korea 2017, 이하 EMK 2017)이 지난 4월 5일(수)부터 7일(금)까지 서울 삼성동 코엑스 Hall C, Hall D에서 세계 최대의 전시 주최사인 Reed Exhibitions와 국내 전문 주최사인 K.Fairs(주)의 합작법인인 리드케이훼어스 유한회사(Reed K.Fairs Ltd.)와 한국광학기기산업협회의 주최로 열렸다.