• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.91-91
• /
• 2010

현재 나노크기의 나노소자에 대한 관심과 연구가 활발히 진행 중에 있고, 나노소자 제작을 위한 나노구조체 연구에도 탄력을 받고 있다. 나노구조체 연구 중에서도 탄소나노튜브(CNT)와 실리콘이 많이 연구되고 있으나 CNT의 경우 금속과 반도체 등 전기적 특성이 혼재되어 분리기술이 필요하며, 실리콘 기반의 나노구조체들은 공기 중에 노출되었을 경우 자연 산화막 생성에 대한 문제점들이 대두되고 있다. 이러한 기존 나노구조체들의 문제점들을 극복하기 위해 산화물 계열의($InO_3$, ZnO와 $SnO_2$ 등) 나노구조체들이 화학, 광학 및 생화학 센서등의 다양한 응용 연구들이 진행되고 있다. 본 연구에서는 thermal evaporation법으로 tube furnace 장비를 이용하여 온도($500{\sim}900^{\circ}C$)변화에 따른 ZnO nanorod를 성장시켰다. 성장된 ZnO nanorod의 구조적 특성을 확인하기 위하여 전계방출주사전자현미경(SEM)을 측정한 결과 ZnO nanorod들은 직경 50~80nm, 길이는 400~1000nm 이상까지 다양한 직경과 길이를 가지고 성장되었으며 $800^{\circ}C$ 에서 성장된 ZnO nanorod가 가장 곧고 이상적인 nanorod의 형태를 이루는 것을 확인할 수 있었다. Nanorod는 온도가 높아질수록 nanowire로 성장됨에 따라 본 연구에서 $800^{\circ}C$ 에서는 nanorod형태를 이루고 있으나 $900^{\circ}C$에서부터 nanowire의 형태로 성장되었다. 또한 성장된 ZnO nanorod들의 X-선 회절패턴(XRD)을 측정 결과 ZnO의 (002) 우선 배양성 때문에 성장된 nanorod 또한 (002) 방향으로 성장되었음을 확인하였다. 이 연구를 통하여 온도를 조절함으로서 ZnO nanorod의 성장제어가 가능함을 확인하였고, 특성 분석을 통하여 발광소자, Solar Cell로의 응용가능성을 확인하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.551-563
• /
• 2012

Medical ultrasound systems have been used since 1950s, and are now widely used in most hospitals as indispensable diagnostic imaging systems. Since array probe was introduced in 1970s, beamforming technology using electronic signal processing has been adopted to the medical ultrasound system, and has been improved. Beamforming is a important technology which defines the resolution of the ultrasound system. In this paper, the technologies are introduced from basic beamforming principles to current trend. They include principles of beamforming using array probe, basic theory, and practical implementation, and recent topics of synthetic aperture imaging, adaptive beamforming, 2-dimensional beamforming using 2-dimensional array are also introduced. These various technologies will improve system performances continuously by merging innovatively with various technologies in other fields.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.61-66
• /
• 2017

Vanadium Dioxide has been investigated for use as a "spectrally-selective" window coating to block infrared transmission and reduce the loss of building interior heat through windows. The preparation of thermochromic $VO_2$ powder by the reductive reaction with hydrogen was studied. The reductive reaction method has many advantages of easy and mass production of $VO_2$ powder according to controlled reaction without semi-conductor equipments like sputter and beam evaporator. The reaction temperature, time, concentration of reductive gas, post-annealing condition and W addition as dopant would affect the characterization of $VO_2$ powder and its thermochromism. Many applications for electrical device and energy-saving technologies is expected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.744-751
• /
• 2008

Ubiquitous computing is a new paradigm of telecommunication technology and is embedded with advanced computing technology to process a large amount of data in a normal environment. Generally, ail equipment is embedded with sensors and operating devices to interaction with communication functions. That is why ubiquitous computing must be able to access any devices anywhere at anytime in order to perform appropriate functions. Unfortunately, however, it is difficult to make an optimized design for applications which can effectively interaction with various functions in distributed environment like ubiquitous computing. Therefore, this paper is aimed at deploying interface with server nodules and virtual prototyping by utilizing LabVIEW and embedded application software with additional network function. In addition, given information about sensors collected from context-awareness and location-awareness, it will suggest the ideal ubiquitous application based on context-awareness and apply the advanced application to device control and monitoring through context awareness of lab.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2022-2030
• /
• 2008

System such as FA and breakup TC is applied by real time and need to manage. This paper studies data processing skill that can divide TC and data of much quantity with collection by real time. Modularize to several system, and use of computer communication network that interlink computers that can achieve control function of each systems to network is spreading. Develop that can take advantage of Ideonet communication method and transmit signal of channel because do multiplex all. Do data that have semi-conductor equipment or many input of LCD equipment and output node multiplex, and several units real time Ideonet communication that control is available use that all input of point of contact and output module develop.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1751-1758
• /
• 2008

Digital holography interference pattern generated by a computer calculation (CGH) is one of the most expensive contents and its usage is being expanded. Thus, it is highly necessary to protect the ownership of digital hologram. In this paper a hologram-domain and a frequency-domain electronic watermarking schemes were proposed. The hologram-domain scheme was only to compare the results to the ones from frequency-domain scheme and the frequence-domain scheme used 2-dimensional against the attaks. Especially the MDWT-domain scheme was very high robustness such that th error ratio at the worst case was only 3%. Thus, we expect that it is used as a good watermarking scheme of digital hologram with high performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.773-776
• /
• 2009

Last of the car industry can be grouped in one-vehicle electronic equipment, the development of the network, and accordingly the communication between each of the network is important. The network currently being used in vehicles include CAN, LIN, MOST, FlexRay, etc. are used. Network of several different kinds of applications using the federation said they were also germ, which causes the driver some more convenient environment, the desire to drive a vehicle that is increasing. If vehicle for other network environments with one integrated environment to make it a gateway for research done actively, the more applications are expected to be developed. In this paper, using gateway between CAN bus used for Body Train-side control of the vehicle network and MOST provided for infotainment systems. In vehicle automatic safety control system will be designed by One of CAN Nodes car speed information sending to MOST Navigation while don't received GPS information in the tunnel.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.370-376
• /
• 2021

development of the aerospace industry is increasing the research of projectiles. In addition, many tests are under way and many failures occur accordingly. Projectiles should be able to minimize failures because they are more dangerous than other electronic equipment. Therefore, it is necessary to verify wiring before powering the projectile. Accordingly, the wiring status was verified by resistance measurements. However, the wiring test of the previous resistance measurement method cannot be accurately measured due to devices such as capacitors and inductors in the projectile circuit. In this paper, impedance is measured in the connection state of cables and projectiles using a TDR meter. The Z-Segmentation algorithm is used to set the reference value for the measured steady state impedance. The Z-Segmentation algorithm first finds the peak values of the impedance waveform using a Kalman filter and obtains the final impedance peak segment through segmentation. In this way, the wiring status is determined based on the reference value for the normal state of the wiring.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.157-162
• /
• 2021

In this study, 3D printing filaments using recycled polypropylene (rPP) were produced by a single screw extruder. Graphene composite filament was also prepared using electrochemically exfoliated graphene (EEG) as a composite filler by adding 10, and 20 wt% of EEG to rPP. The graphene and rPP were successfully dispersed with great homogeneity, so that 3D filaments were uniformly produced, and their thermal properties increased as the graphene content increased. The mechanical property was also improved when EEG was 10 wt% but decreased when EEG was 20 wt% compared to that of rPP. 3D structures were successfully manufactured using prepared 3D filaments by a conventional 3D printer, and great advantages can be expected in terms of environmental and economical perspective by adopting plastic waste.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.123-128
• /
• 2021

As the spread of DC power distribution systems increases, the occurrence of failures and fire accidents are also increasing. In particular, the ESS fire accident, which is a component of the smart grid, and the fire accident of the solar power system, which is a direct current system, are caused by problems in the electrical connection between system components as the supply of new and renewable energy rapidly increases and old facilities increase. An arc that can cause a direct fire by releasing the induced light and heat has been pointed out as one of the causes of fire. Therefore, the problem of such an arc defect is that it is impossible to block an arc accident in advance with the existing overcurrent circuit breaker and earth leakage circuit breaker. In this paper, we intend to develop a test equipment that satisfies international standardization and to develop a DC arc generator to protect against failure and fire caused by arcing.